• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.338-338
• /
• 2000

This paper proposes a modified TD-PSOLA algorithm for Korean speech synthesis. A WSS (Weighted score search) algorithm is proposed for pitch detection and speech synthesis engine is designed using 46 phones database.

• 대한음성학회지:말소리
• /
• 제62호
• /
• pp.85-96
• /
• 2007

In this paper, we carried out recognition experiments for noisy speech having various levels of car noise and output of an audio system using the speech interface. The speech interface consists of three parts: pre-processing, acoustic echo canceller, post-processing. First, a high pass filter is employed as a pre-processing part to remove some engine noises. Then, an echo canceller implemented by using an FIR-type filter with an NLMS adaptive algorithm is used to remove the music or speech coming from the audio system in a car. As a last part, the MMSE-STSA based speech enhancement method is applied to the out of the echo canceller to remove the residual noise further. For recognition experiments, we generated test signals by adding music to the car noisy speech from Aurora 2 database. The HTK-based continuous HMM system is constructed for a recognition system. Experimental results show that the proposed speech interface is very promising for robust speech recognition in a noisy car environment.

• 한국가스학회지
• /
• 제17권6호
• /
• pp.15-19
• /
• 2013

이 논문은 자동차 엔진룸에서 전기적인 접촉불량에 의한 단락현상과 엔진의 뜨거운 열에 의해 가연성 물질과 접촉하여 화재가 발생된 원인을 분석하고 연구하는 것이다. 첫째, 배터리에서 시동모터로 연결되어 있는 배터리 전원선이 자동변속기 상단에 배선을 고정시켜 주는 브래킷(Bracket) 볼트 이완으로 차체와의 단락 현상에 의해 화재가 발생된 것을 확인하였다. 둘째, 배터리에서 시동모터까지 가는 배선에 감은 절연테이프가 녹아 단락현상에 의해 화재를 일으킨 것을 확인하였다. 셋째, 냉각 팬 배선이 이완되어 과열된 엔진의 열에 의해 배선이 융착되어 화재가 발생된 것을 확인하였다 따라서, 엔진에 관련된 시스템의 화재는 엔진 및 각 시스템의 손상으로 자동차 탑승객을 위험에 처하게 하며, 화재 후 자동차는 재사용이 어렵게 되므로 시스템의 철저한 관리와 세심한 주의가 요구되어진다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.514-519
• /
• 2011

Recently, the interest in technologies for a highly efficient powertrain, i.e. a variable displacement engine or a light weight car body, to improve the fuel efficiency of automobile saving the environment has been increased. However this trend deteriorates NVH performance of a vehicle and the use of a conventional engine mounting system becomes unsatisfactory. In order to solve this dilemma, an active engine mounting system that could isolate or cancel out vibrations occurred at the powertrain was suggested. In this paper, In order to optimize the electromagnetic active engine mount performance, the actuator of the engine mount through FEM analysis and optimal design, noise and elastomer testing of the prototype through the optimal design of actuators for the electromagnetic active engine mount on the impact of the performance improvement is verified.

• 동력기계공학회지
• /
• 제6권3호
• /
• pp.57-63
• /
• 2002

This paper describes the acoustic analysis of mid duty truck. The focus of the analysis is on structure borne engine noise with major contributions of 2nd order. It has been previously recognized that the noise contribution of each transfer path of structure borne noise can be varied with the charateristics of each mounts and vibro acoustic sensitivity of car body. The structure of car body will be split up into three major sub components, which are modeled separately, the engine, the frame and the cab. The acoustic performance is evaluated on three levels: engine to frame transfer, frame to cab transfer, and panel contribution from cab to driver. In order to perform these analyses, analytical models are created for the engine, frame, cab and acoustic cavity. The models are linked through a coupled fluid structure calculation, and through FRF Based Substructuring for the structural couplings. Based on the structural coupling calculations, a transfer path analysis is performed to identify the most important transfer paths. These paths are then the focussing points for applying modifications to the structure or the mount system. Finally, a number of modification are proposed and their effect is quantified.

• 전기학회논문지
• /
• 제65권7호
• /
• pp.1263-1269
• /
• 2016

Hearing impaired persons are exposed to the danger since they can't be aware of many dangerous situations like fire alarms, car hones and so on. Therefore they need haptic or visual informations when they meet dangerous situations. In this paper, we design a dangerous sound detection engine for hearing impaired. We consider four dangerous indoor situations such as a boiled sound of kettle, a fire alarm, a door bell and a phone ringing. For outdoor, two dangerous situations such as a car horn and a siren of emergency vehicle are considered. For a test, 6 data sets are collected from those six situations. we extract LPC, LPCC and MFCC as feature vectors from the collected data and compare the vectors for feasibility. Finally we design a matching engine using an artificial neural network and perform classification tests. We perform classification tests for 3 times considering the use outdoors and indoors. The test result shows the feasibility for the dangerous sound detection.

• International Journal of Reliability and Applications
• /
• 제17권2호
• /
• pp.137-147
• /
• 2016

The engine mount of a car subjected to a pre-load related to the weight of the engine, and acts to insulate the vibration coming from the engine by moving on large or small displacement depending on the driving condition of the car. The vibration insulation of the engine mount is an effect obtained by dissipating the mechanical energy into heat by the viscosity characteristic of the rubber and the microscopic behavior of the additive carbon black. Therefore, dynamic stiffness from the intrinsic properties of rubber filled with carbon black at the design stage is an important design consideration. In this paper, we introduced a hyper-elastic, visco-elastic and elasto-plastic model to predict the dynamic characteristics of rubber, and developed a fitting program to determine the material model parameters using MATLAB. The dynamic characteristics analysis of the rubber insulator of the ACTIVE MOUNT was carried out by using MSC.MARC nonlinear structural analysis software, which provides the dynamic characteristics material model. The analysis results were compared with the dynamic characteristics test results of the rubber insulator, which is one of the active mount components, and the analysis results were confirmed to be valid.

• 대한음성학회지:말소리
• /
• 제48호
• /
• pp.141-153
• /
• 2003

Researches into robust recognition in noise environments, especially in car environments, are being carried out actively in speech community. In this paper we will report on three types of corpora that SiTEC (Speech Information TEchnology & industry promotion Center) has created for research into speech recognition in car noise environments. The first is the recordings of 900 Korean native speakers, distributed according to gender, age, and region, who uttered application words in car environments. The second is the collections of mixed noise in 3 car types by model while setting up various noise patterns which can be obtained with the car engine on or off, at different driving speed, and in different road conditions with windows open or closed. The third is the recordings of simulated speech by HATS (Head and Torso Simulator) in car environments with the internal and external noise factors added. These three types of recordings were all made through synchronized 8 channel microphones that are fixed in a car. The creation and applications of these corpora will be reported on in detail.

• 오토저널
• /
• 제23권1호
• /
• pp.34-42
• /
• 2001

• 센서학회지
• /
• 제13권2호
• /
• pp.139-143
• /
• 2004

This paper presents a method that the engine oil condition is detected using a natural convection heat transfer in a engine oil. A sensor circuit maintains a constant temperature difference between a heat plate and engine oil for detecting a natural convection heat transfer rate on the constant temperature. The natural convection heat transfer rate is measured by a current through the heat plate of the sensor circuit. The sensor is tested by a fresh oil. 6,000 km and 10,000 km driven oil in the oil temperature range from $20^{\circ}C$ to $100^{\circ}C$. In the experimental result, when the current through the heat plate is altered by variation of a engine oil temperature and flows driven oil more than fresh oil, the sensor could inform a engine oil deterioration to a car driver.