• Proceedings of the KSPS conference
• /
• 2004.05a
• /
• pp.231-234
• /
• 2004

This paper describes an efficient method for improving the noise-robustness in speech recognition in a running car by considering wind noise. In driving car, mainly three kind of noises engine noise, tire noise and wind noise, are severely affect recognition performance. Especially wind noise is an important factor in driving car with window opened. We analyzed wind noise in various driving conditions that are 60, 80, 100 km/h with window fully opened, window half opened. We clarified that the recognition rate is significantly degenerated when the wind noise components in the frequency range above 200 Hz are large. We developed a preprocessing method to improve the noise robustness despite of wind noise. We adaptively changed the cutoff frequency of the front-end high-pass filter from 100 through 200 Hz according to the level of the wind noise components. By this method, the recognition rate is considerably improved for all kind of driving conditions

• Journal of Korean Port Research
• /
• v.13 no.2
• /
• pp.303-312
• /
• 1999

The automated gate operating system is developed in this paper that controls the information of container at gate in the ACT. This system can be divided into three parts and consists of container identifier recognition car plate recognition container deformation perception. We linked each system and organized efficient gate operating system. To recognize container identifier the preprocess using LSPRD(Line Scan Proper Region Detection)is performed and the identifier is recognized by using neural network MBP When car plate is recognized only car image is extracted by using color information of car and hough transform. In the port of container deformation perception firstly background is removed by using moving window. Secondly edge is detected from the image removed characters on the surface of container deformation perception firstly background is removed by using moving window. Secondly edge is detected from the image removed characters on the surface of container. Thirdly edge is fitted into line segment so that container deformation is perceived. As a results of the experiment with this algorithm superior rate of identifier recognition is shown and the car plate recognition system and container deformation perception that are applied in real-time are developed.

• Journal of the Korea Convergence Society
• /
• v.11 no.2
• /
• pp.155-160
• /
• 2020

In this study, the pleasant driving environment of the driver and passenger in the summer was investigated through the internal flow analysis of air due to the opening and closing of the car windows. The conditions on the entrance of the air conditioner with the opening and closing status of vehicle window were applied to the flow analysis by taking into consideration the actual driving environment. The automotive air conditioning outlet, the seat and the inside of car were modeled. As the air flow inside the car was analyzed, the air flow configuration and the temperature distribution were examined. In this analysis, the results were taken in consideration of only the effects of internal air and the opening and closing of window, assuming the interior of the vehicle as insulation. The analysis of each condition shows that these models maintain a pleasant environment. It is seen that this analysis result on the internal flow analysis according to the opening and closing of vehicle window can be applied by converging with the field of design.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.1
• /
• pp.501-506
• /
• 2020

In this experimental study, we have analyzed aerodynamic performance of the four representative types of passenger car vehicles, different types of side window angles, different types of engine hood angles, and the angle difference of the roof line in order to comprehensively analyze how the aerodynamic performance varies with different shape of vehicle. Experiment results showed that the rear window falling at aa certain angle lowered aerodynamic performance, angle difference of the lowered roof line did not affect aerodynamic performance, and the back window line falling at certain angles had no visible effect on aerodynamic performance. Back window line leaning towards front side may help enhance styling aesthetics, but aerodynamic performance decreased. In case of rear diffuser installation, aerodynamic performance also decreased.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.1095-1098
• /
• 1999

We have developed a speaker dependent voice command system(VCS) to control the sunroof in the car using RSC-164 VRP(Voice Recognition Processor). VCS consists of control circuits, microphone, speaker and user switch box. The control circuits include RSC-164, input audio preamplifier, memory devices, and relay circuit for sunroof control. It is designed robustly in various car noisy situations like audio volume, air conditioner, and incoming noise when window or sunroof opened. Each two users can control the car sunroof using seven voice commands on the Super TVS model and five voice commands on the Onyx model. It works well when we drive the car at over 100 km/h with the sunroof opened.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.755-760
• /
• 2007

The research will be essential that the method for strengthening safety are safe installations in a hardware portion, a safe running ceremony of the vehicle employee (an engine driver) and the estimate of the situation which is accurate. In railway car the window wiper which is auxiliary equipment for safe operation is changed the existing manual control method with automatic correspondence precipitation used raindrops censor which can assure the vision of driving. It can be easy to safe driving as might have expected the object. We carried out studies technical review investigation which can accomplish the best suited wiping speed in maintaining an introduction existing system in the manual control system applied the existing train and corresponding to precipitation. The observation fact in the studies can be possible to ensure safety operation. That is, Manual operation method (of the driver) to add the automatic speed adjust function can operate improved window wiper drive system when it rains and, as was expected, it is able to ensure the range of a good railroad driver's vision and to concentrate in working at rainfall.

• Proceedings of the Optical Society of Korea Conference
• /
• 2004.02a
• /
• pp.244-245
• /
• 2004

• Journal of Applied Reliability
• /
• v.11 no.1
• /
• pp.1-15
• /
• 2011

Automobile markets are so fierce in the world market that every major manufacturer assure the buyer of the car by give a provocative warranty plan for their cars. For instance Hyundai motor company offer 10 years and 100,000 miles of warranty whichever comes first. But in order for this effort to be successful every critical component such as window switch has to be proven to be reliable in an adverse environment. Therefore, in this article reliability assessment criteria for window switch are established in terms of basic performance test, environment test and life test.

• Proceedings of the KSR Conference
• /
• 2000.11a
• /
• pp.491-498
• /
• 2000

This study was carried out about the design and FEM analysis of articulated Trailer car with aluminum bodyshell for Korean High Speed Train of maximum operating speed of 350㎞/h. The integral design by extra-long extruded sections made possible through the use of aluminium alloys and continuous window shape with skin were adopted in the design of aluminium bodyshell. Articulated structures in each trailer's end were bolted laterally on end structure. FEM analysis showed that the design satisfied the specified load criteria. This study describes process and result of development of aluminum trailer bodyshell for KHST.

• Proceedings of the KSR Conference
• /
• 2000.11a
• /
• pp.157-164
• /
• 2000

This study is about predicting the interior pressure level of the korean high speed train using ray acoustic method. The motor car and the motor and passenger cabin are investigated under the environment of passing open countryside and inside tunnel of 350 km/hr. Calculated sound levels are compared with the proposed sound levels and suggestions about the transmission Joss values of isolating panels inside motor car and the guide lines of allowed sound power limit of motor equipments are provided. Results of TPI car show calculated interior sound level is below the proposed values for both cases of open countryside running and inside tunnel. Since ray acoustic method calculated only air borne noise component, real sound level of the motor car may be higher than prediction. Passenger cabins of TMI, TM5 show higher sound level than the proposed values, so window method was carried out to find the contribution of each panel components and point out the remedy of transmission path. Reduction of sound power of motor equipments should be condisered at the same time.