• 소음진동
• /
• 제9권6호
• /
• pp.1145-1151
• /
• 1999

Sensitivity analysis and structural modification technique are used to reduce the interior noise of a passenger car. The sensitivity analysis for the noise level at the rear seat shows that the stiffness change at the front lower member and the rear roof rail are sensitive. Using the structural modification method, we verified that the reinforcements at those members decrease the noise transfer function from the body to the rear seat. The combined application of the sensitivity analysis and structural modification method can decrease the noise level effectively.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(III)
• /
• pp.114-119
• /
• 2003

Passengers are much interested in ineroir noise caused speed-up and mass reduction of railway vehicles. Generally, the major noise source for passenger cars are rolling noise and aerodynamic noise. The purpose of this paper is to evaluate the noise level and to analyze the noise sources for domestic and KTX trains. We also measured the interior noise and the rolling noise for passenger cars. In result, the noise level is below 65dBA for Seamaeul coachs, and below 66dBA for KTX coachs.

• 한국디자인학회:학술대회논문집
• /
• 한국디자인학회 2005년도 춘계 학술발표대회 논문집
• /
• pp.16-17
• /
• 2005

• 대한인간공학회지
• /
• 제33권6호
• /
• pp.515-532
• /
• 2014

Objective: The purpose of this study is to define consumers' affection on the interior design of commercial cars in terms of its design factors: color, embossing and gloss as independent factors. Background: Existing affective studies related to interior of vehicle focus on just sedans. However, there is no affective study about the interior of commercial cars. In addition, it is hard to change levels to which manufactures want. Method: Representative design factors were drawn using ANOVA and SNK analysis and definitive affective vocabularies were drawn using factor analysis. Furthermore, the results of 3D experiment were analyzed using ANOVA and LSD analysis. 3D images for the experiment were made using 3D max program. The experiment revealed that consumers discerned the differences in levels of each design factor and affective vocabulary. Results: The ANOVA revealed that beige color "A" type and non-gloss were the most preferred design in terms of the affective vocabularies and total preference. Conclusion: The result of the experiment may help manufactures to design the interior of commercial cars in the near future. Furthermore, the ANOVA result of affective vocabularies evaluation is expected to suggest a meaningful guideline. Application: The study results may be utilized as a guideline for interior design of commercial cars.

• 한국실내디자인학회논문집
• /
• 제3호
• /
• pp.64-70
• /
• 1994

The objective of this study is to provide recommendations for the interir design of motor showroom as a sales policy. ten cases of motor showrooms were selected from already observed 50 showrooms in Seoul area. findings revealed that the car industries of Korea should meet the strong needs of differentiated sales policy, and the showroom design was an important factor which influenced client's pruchasing power. From these findings and analyses, this study suggests that each brand has to represent the typical total image to appeal to the consumer strongly . Additionally each showroom should be flexible in modification to meet the diverse conditions such as the location, required function and the trend of consumers. In conclusion , researchers provided 6 types of recommendations in terms of floor plan and interior elements such as circulation path, moduled furniture and objects color and lighting variation . Hopely, this research provides more functional and comfortable environment of automobile showrooms for consumers and companies.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.675-678
• /
• 2004

Comparative analysis it did the interior noise of the KTX vehicle and the P-P Semaeul vehicle from the conventional line Homan Seodaejeon-Hanam section from the research which it sees. The test result KTX vehicle appeared when the P-P Semaeul vehicle compared to 20 - 25 KM/H speed up operating commerce operation speed even, the standard values 66 dBA the lowers 55 - 62 dBA. P-P Semaeul vehicle interior noise of the identical test section 63 dBA it will compare and there is a possibility the KTX vehicle knowing from the existing line operating hour interior noise.

• 소음진동
• /
• 제8권5호
• /
• pp.862-869
• /
• 1998

The interior noise generated by the windshield wiper system including a wiper motor, the motor mountings and linkages is considered as a structure-borne noise. The structureborne noise is closely related with the system vibration which was transmitted into interior cabin through the car body. In this study, the frequency characteristics of vibration in the wiper motor system were first identified through the frequency analysis. Then effects of the wiper motor mountings and linkages on the vehicle interior noise were studied through in-vehicle measurements. Finally a possibility of noise reduction at a certain frequency was revealed from the study.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.789-792
• /
• 2005

The dominant noise sources of Diesel Multiple Units are powerpack, which is composed of engine, transmission and cooling system, noise and wheel-rail rolling noise. The interior noise of a running vehicle is determined by structure-borne noise and air-borne noise from these noise sources. The contributions of interior noise from each noise source are calculated by air-borne transfer functions and structure-borne transfer functions of noise sources. In this paper, source separation technique is proposed to determine these transfer functions from the results of stationary and running tests of existing vehicle. With this technique, it is possible to get hold of contributions of interior noise from .noise sources of running vehicle. This source separation technique makes it possible to take efficient measures for reduction of interior noise at the early car-development stage.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.207-212
• /
• 2006

In this study we conducted computer simulation with FDS V4.0.5 for the subway carriage of Seoul Metro to the replacement of interior materials. We tried to use the real data for the simulation by testing the interior materials in our Lab. From the result of the simulation we could confirm the fire resistance of the new interior replaced car to the chosen arson scenario case.

• 한국철도학회논문집
• /
• 제7권1호
• /
• pp.55-59
• /
• 2004

Composite materials were used widely due to merit of light weight, low maintenance cost and easy installation. But it is the cause of enormous casualties to men and properties because of weak about the fire. Particularly, it is more serious in case of subway train installed composite materials. For this reason, experimental comparison has been done fur measuring heat release rate(H.R.R) and smoke production rate(S.P.R) of interior panels of electric motor car using cone calorimeter. A high radiative heat flux of 50kW/㎡ was used to bum out all materials and to simulate the condition of fully developed fire case in the tests. It was observed that Heat Release Rate and Smoke Production Rate curves were dependent on the kinds of the interior materials. From the heat release rate curves, the sustained ignition time, peak heat release rate and total heat release rate were deduced, These data are useful in classifying the materials by calculating two parameters describing the possibility to flashover.