• Advances in nano research
• /
• v.16 no.3
• /
• pp.251-263
• /
• 2024

This article investigates the free vibration behavior of carbon nanotube reinforced composite (CNTRC) beams embedded using variational analytical methods and artificial neural networks (ANN). The material properties of layered functionally graded CNTRC (FG-CNTRC) beams are estimated using nonlocal parameters modified power-law with different types of CNT distributions through the thickness direction of the beam. Adopting Eringen's nonlocal elasticity theory to capture the small size effects, the nonlocal governing equations are derived and solved using the analytical method. And also, the problem was analyzed using the ANN method. The architecture of the proposed ANN model is 3-9-1. In the experiments, we used 112 different data to predict the natural frequency using ANN. Based on the nonlocal differential constitutive relations of Eringen, the equations of motion as well as the boundary conditions of the beam are derived using Hamilton's principle. The classical beam theory is used to formulate a governing equation for predicting the free vibration of laminated CNTRC beams. According to the experimental results, the prediction ability of the ANN model is very good and the natural frequency can be predicted in ANN without attempting any experiments.

• Nuclear Engineering and Technology
• /
• v.56 no.6
• /
• pp.2395-2403
• /
• 2024

With the rapid development of DC high voltage accelerator, higher requirements have been raised for the design of DC high voltage power supply, requiring more stable high voltage with lower output ripple. Therefore, it also puts forward higher requirements for the parameter design of the voltage doubling rectifier circuit, which is the core component of the DC high voltage power supply. In order to obtain output voltage with better performance, the effects of the working frequency, the stage capacitance and the load resistance on the output voltage of the voltage doubling rectifier circuit are studied in detail by simulation. It can be concluded that the higher the working frequency of the transformer, the larger the stage capacitance, the larger the load resistance and the better the output voltage performance in a certain range. Based on this, a 2.5 MV voltage doubling rectifier circuit driven by a 120 kHz frequency transformer is designed, developed and tested for the power supply of the neutron source device towards BNCT. Experimental results show that this voltage doubling rectifier circuit can satisfy the design requirements, laying a certain foundation for the engineering design of DC high voltage power supply of neutron source device.

• Nuclear Engineering and Technology
• /
• v.56 no.8
• /
• pp.3450-3462
• /
• 2024

This paper presents a computational framework for drop time assessment of a control element assembly (CEA) under fuel assembly (FA) deformations. The proposed framework consists of three key components: 1) finite element modeling of CEA, 2) fluid-structure interaction to compute drag force, and 3) modeling of frictional contact between CEA and FA. Specially, to accommodate the large motion of CEA, beam elements based on absolute nodal coordinate formulation (ANCF) are adopted. The continuity equation is utilized to calculate the drag force, considering flow changes in the cross-sectional area during the CEA drop. Lastly, beam-inside-beam frictional contact model is employed to capture practical contact conditions between CEA and FA. The proposed framework is validated through experiments under two scenarios: free falls of CEA within FA, encompassing undeformed and deformed scenarios. The experimental validation of the framework demonstrated that the drop time of CEA can be accurately predicted under the complex coupling effects of fluid and frictional contact. The drop times of the S-shaped deformation case is longer than those of the C-shaped deformation case, affirming the time delay due to frictional force. The validation confirms the potential applicability to access the safety and reliability of nuclear power plants under extreme conditions.

• Transactions of Materials Processing
• /
• v.20 no.3
• /
• pp.229-235
• /
• 2011

The formability of magnesium alloy sheets at room temperature is generally low because of the inherently limited number of slip systems, but higher at temperatures over $150^{\circ}C$. Therefore, prior to the practical application of these materials, the forming limits should be evaluated as a function of the temperature and strain rate. This can be achieved experimentally by performing a series of tests or analytically by deriving the corresponding modeling approaches. However, before the formability analysis can be conducted, a model of flow stress, which includes the effects of strain, strain rate and temperature, should be carefully identified. In this paper, such procedure is carried out for Mg alloy AZ31 and the concept of flow stress surface is proposed. Experimental flow stresses at four temperature levels ($150^{\circ}C$, $200^{\circ}C$, $250^{\circ}C$, $300^{\circ}C$) each with the pre-assigned strain rate levels of $0.01s^{-1}$, $0.1s^{-1}$ and $1.0s^{-1}$ are collected in order to establish the relationships between these variables. The temperature-compensated strain rate parameter which combines, in a single variable, the effects of temperature and strain rate, is introduced to capture these relationships in a compact manner. This study shows that the proposed concept of flow stress surface is practically relevant for the evaluation of temperature and strain dependent formability.

• Steel and Composite Structures
• /
• v.28 no.5
• /
• pp.589-606
• /
• 2018

The previous studies reflected the significant effect of neutral-axis position and coupling of in-plane and out-of-plane displacements on behavior of functionally graded (FG) nanobeams. In thin FG beam, this coupling can be eliminated by a proper choice of the reference axis. In shear deformable FG nanobeam, not only this coupling can't be eliminated but also the position of neutral-axis is dependent on through-thickness distribution of shear strain. For the first time, in this paper it is avoided to guess a shear strain shape function and the exact shape function and consequently the exact position of neutral axis for arbitrary gradation of higher order nanobeam are obtained. This paper presents new methodology based on differential transform and collocation methods to solve coupled partial differential equations of motion without any simplifications. Using exact position of neutral axis and higher order beam kinematics as well as satisfying equilibrium equations and traction-free conditions without shear correction factor requirement yields to better results in comparison to the previously published results in literature. The classical rule of mixture and Mori-Tanaka homogenization scheme are considered. The Eringen's nonlocal continuum theory is applied to capture the small scale effects. For the first time, the dependency of exact position of neutral axis on length to thickness ratio is investigated. The effects of small scale, length to thickness ratio, Poisson's ratio, inhomogeneity of materials and various end conditions on vibration and buckling of local and nonlocal FG beams are investigated. Moreover, the effect of axial load on natural frequencies of the first modes is examined. After degeneration of the governing equations, the exact new formulas for homogeneous nanobeams are computed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.7
• /
• pp.3207-3215
• /
• 2012

In this paper, we study the bending and free vibration analysis of nano plate, using a nonlocal elasticity theory of Eringen with a third-order shear deformation theory. This theory has ability to capture the both small scale effects and quadratic variation of shear strain and consequently shear stress through the plate thickness. Analytical solutions of bending and vibration of a laminated composite nano plate are presented using this theory to illustrate the effect of nonlocal theory on deflection of the nano plates. The relations between nonlocal third-order and local theories are discussed by numerical results. Further, effects of (i) nonlocal parameters, (ii) laminate schemes, (iii) directions of the fiber angle and (iv) number of layers on nondimensional deflections are investigated. In order to validate the present solutions, the reference solutions are used and discussed. The results of anisotropic nano plates using the nonlocal theory may be the benchmark test for the bending analysis.

• Knowledge Management Research
• /
• v.16 no.2
• /
• pp.1-27
• /
• 2015

This paper presents a knowledge-based view of platform-centered collaborations among multiple organizations. Studies of technological innovation and knowledge creation have broadened beyond their initial emphasis on internal development within an organization or simple exchange of ideas between two parties toward complex collaboration among many organizations at the level of platform-based knowledge ecosystems. Platforms serve as an interface between different groups of producers and consumers in a variety of multi-sided knowledge markets such as smartphone operating systems and video games industries. This study is an exploratory examination to offer theoretical understanding of how the organizational capabilities of platform leaders help expand a network of platform participants. The growth of platform participants is particularly important in the early stage of any platforms as the concept of network effects suggests that the platform with the largest number of participants will capture entire markets. Building upon organization studies and network economics theory on multisided markets, this paper focuses on the role of platform leaders in expanding platform-based collaboration. In our view, platform leaders develop varying levels of three organizational capabilities to discern quality of potential participants, to attract them to actually participate in collaboration, and to maintain long-term exchange relations in the ecosystem. We suggest that the capabilities of platform leaders will have a positive effect on the expansion of platform participants to secure network effects, and also examine several contextual factors that moderate the relationship between a platform leader's capacity and platform expansion.

• Safety and Health at Work
• /
• v.11 no.3
• /
• pp.307-313
• /
• 2020

Background: Many tasks in industrial and health care setting are involved with pushing and pulling tasks up or down on a ramp. An efficient method of moving cart which reduces the risk of low back pain should be concerned. This study aimed to investigate the effects of handling types (HTs) and slope on lumbar spinal load during moving a cart on a ramp. We conducted a 2 × 2 × 4 factorial design with three main factors: 2 HTs, 2 handling directions of moving a cart and 4 degrees of ramp slope. Methods: Thirty healthy male workers performed 14 tasks consist of moving a cart up and down on the ramp of 0°, 10°, 15°, and 20° degrees with pushing and pulling methods. Joint angles from a 3D motion capture system combined with subject height, body weight, and hand forces were used to calculate the spinal load by the 3DSSPP program. Results: Our results showed significant effect of HT, handling directions and slope on compression and shear force of the lumbar spine (p < 0.001). When the ramp gradient increased, the L4/5 compression forces increased in both pushing and pulling (p < 0.001) Shear forces increased in pulling and decreased in pushing in all tasks. At high slopes, pulling generated more compression and shear forces than that of pushing (p < 0.01). Conclusion: Using the appropriate technique of moving a cart on the ramp can reduce the risk of high spinal load, and the pushing is therefore recommended for moving a cart up/down on ramp gradients.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.1
• /
• pp.82-93
• /
• 2008

The flowfield behind two cylinders and flow-induced noise generated from the cylinders in various arrangement are numerically investigated based on the finite difference lattice Boltzmann model with 21 velocity bits. which is introduced a flexible specific heat ${\gamma}$ to simulate diatomic gases like air. In an isolated cylinder with two type of mesh. some flow parameters such as Strouhal number $S_t$ and acoustic pressure ${\Delta}p$ simulated from the solution are given and quantitatively compared with those provided the previous works. The effects of the center-to-center pitch ratio $L_{cc}/d=2.0$ in staggered circular cylinders as shown in Fig. 1 and angles of incidence ${\alpha}=30^{\circ}(T_{cc}/d=0.5)$, $45^{\circ}(T_{cc}/d =0.707)$ and $60^{\circ}\;(T_{cc}/d=0.866)$, respectively, are studied. Our analysis focuses on the small-scale instabilities of vortex shedding, which occurs in staggered arrangement. With the results of drag $C_d$ and lift $C_l$ coefficients and vorticity contours. the mechanisms of the interference phenomenon and its interaction with the two-dimensional vortical structures are present in the flowfields under $Re\;{\le}\;200$. The results show that we successively capture very small pressure fluctuations, with the same frequency of vortex shedding, much smaller than the whole pressure fluctuation around pairs of circular cylinders. The upstream cylinder behaves like an isolated single cylinder, while the downstream one experiences wake-induced flutter. It is expected that, therefore, the relative position of the downstream cylinder has significant effects on the flow-induce noise, hydrodynamic force and vortex shedding characteristics of the cylinders.

• Korean Journal of Applied Biomechanics
• /
• v.30 no.3
• /
• pp.247-253
• /
• 2020

Objective: This study aimed to examine the effects of real-time visual feedback gait training on gait stability in older adults. Method: Twelve older adults participated in this study, being divided into 2 groups including a) visual feedback (VF) and b) non-visual feedback (NVF) groups. For 4 weeks, VF performed a treadmill walking training with real-time visual feedback about their postural information while NVF performed a normal treadmill walking training. For evaluations of gait stability, kinematic data of 15-minute treadmill walking were collected from depth-based motion capture system (30 Hz, exbody, Korea). Given that step lengths in both right and left sides were determined based on kinematic data, three variables including step difference, coefficient of variation, approximate entropy were calculated to evaluate gait symmetry, variability and complexity, respectively. Results: For research findings, VF exhibited significant improvements in gait stability after 4-week training in comparison to NVF, particularly in gait symmetry and complexity measures. However, greater improvement in gait variability was observed in NVF than VF. Conclusion: Given that visual feedback walking gives potential effectiveness on gait stability in older adults, gait training with visual feedback may be a robust therapeutic intervention in people with gait disturbances like instability or falls.