• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.472-481
• /
• 2009

Cementation phenomenon has a huge influence on geotechnical stiffness and strength under low confining pressure. The goal of this study is to evaluate the characteristics of stiffness according to the depth. The piezo disk elements are installed at each layer of the cell for the detection of the compressional waves. The change of compressional wave velocity is classified by three stages. The compressional wave velocities are shown different according to the depth. The compressional wave velocity is especially influenced by cementation, effective stress, and coordinate number. Furthermore, the electrical conductivity and cone tip resistance are measured according to the depth. The electrical conductivity and the cone tip resistance show the similar trend with the compressional wave velocity. This study shows that the cementation by salt is affected by the depth on the granular materials.

• 한국산학기술학회논문지
• /
• 제11권3호
• /
• pp.1023-1026
• /
• 2010

이 논문에서는 미세한 통로를 흐르는 고분자 블렌드의 유변학적 특성에 관하여 연구하였다. 우선 두께가 각각 0.1, 0.2 0.5 mm 인 세 종류의 슬릿 다이를 제작하였고 특수 제작한 피스톤을 부착한 모세관 점도계로 고분자 블렌드의 점도 거동을 관찰하였다. 관찰 결과 상구조가 해도 구조를 가지는 경우 고분자 블렌드의 점도는 다이의 크기에 의존하지 않음을 알 수 있었다. 그러나 상구조가 co-continuous 구조를 가지는 경우에는 점도가 다이의 크기에 의존함을 관찰하였는데, 몇몇 부가 실험 결과 이는 각 상 간의 미끄러짐이 원인임을 알 수 있었다.

• 한국농촌건축학회논문집
• /
• 제23권4호
• /
• pp.63-71
• /
• 2021

The purpose of this study was to investigate whether the standard models for rural housing and wooden housing model have performance for hygrothermal and to propose a way of improvement relevant to hygrothermal performance for those models. All of the models to be analyzed were found to have some parts that were absent of stability in terms of performance for hygrothermal. In the process of analyzing the causes and proposing improvement measures, the following conclusions were derived. Fist, The exterior surface of the structure should be composed of a structure with good moisture permeability, and for the interior surface, a variable vapor retarder paper should be applied in consideration of the reverse condensation phenomenon in summer. Second, in terms of performance for hygrothermal, applications of external insulation plaster finish to the exterior wall or of ventilation method using a rafter vent on the roof should be avoided. Third, a rain screen method with a ventilation layer should be applied to the exterior wall, and a method of constructing ventilation layer separated from the insulation layer with a vapor retarder paper should be applied to the roof. Fourth, the application of insulation materials having capillary action, such as wood fiber insulation board or cellulose insulation board, contributes to more stable performance for hygrothermal.

• 한국농공학회지
• /
• 제36권2호
• /
• pp.96-110
• /
• 1994

The purpose of this study is to develop soil salt prediction model for the estimation of irrigation water requirements for dry field crops in reclaimed tidelands. The simulation model based on water balance equation, salt balance equation, and salt storage equation was developed for daily prediction of sa]t concentration in root zone. The data obtained from field measurement during the growing period of tomato were used to evaluate the applicability of this model. The results of this study are summarized as follows: 1.The optimum irrigation point which maximizes the crop yield in reclaimed tidelands of silt loam soil while maintaining the salt concentration within the tolerance level, ws found to be pF 1.6, and total irrigation requirement after transplanting was 602mm(6.7 mm/day)for tomato. 2.When the irrigation point was pF 1.6, the deviation between predicted and measured salt concentration was less than 4 % at the significance level of 1 7% 3.Since the deviations between predicted and measured values data decrease as the amount of irrigation water increases, the proposed model appear to be more suitable for use in reclaimed tidelands. 4.The amount of irrigation water estimated by the simulation model was 7.2mm/day in the average for cultivating tomato at the optimum irrigation point of pF 1.6.The simulation model proposed in this study can be generalized by applying it to other crops. This, model, also, could be further improved and extended to estimate desalinization effects in reclaimed tidelands by including meteorological effect, capillary phenomenon, and infiltration.

• 대한치과보철학회지
• /
• 제45권5호
• /
• pp.579-588
• /
• 2007

Statement of problem: A tenderness of the dentin after tapering of teeth for dental prosthesis is a common phenomenon. In practice, the alternative desensitizer may be used for minor pain after tapering of teeth. Purpose: In this study, the desensitizers were used to investigate the affect decreasing of shear bond strength according to the use of various cement, such as resin, Glass Ionomer, and phosphate cement. Material and method: Three different desensitizers were used on this study Compositions of two dentin desensitizers were HEMA(hydroxyethylmethacrylate) and glutaraldehyde. The other one is oxalic acid. Three dentin desensitizers applied on 12 degrees taper teeth. Then, Ni-Cr crowns were bonded with Resin cement, Zinc Phosphate (ZPC) cement and Glass Ionomer (GIC) cement. 120 human premolar teeth were used for specimens. The specimens were divided into four group as the reference and the empirical each with thirty specimens, then further divided into 12 group according to type of desensitizers and cement types. The shear bond strength were measured by Instron multi task instrument. Results: According to the result, the measured shear bond strength in order from the weakest to the strongest in general was ZPC, Resin, and GIC. And it is found that the application of desensitizers on dentin surface does not affect the shear bond strength. Conclusion: Dentin desensitizers that alleviate or prevent a dentin tenderness, usually contains HEMA and glutaraldehyde compounds. Such desensitizers are widely used in clinical studies. By applying the dentin desensitizer on the exposed dentin surface, the dentin capillary are blocked and periodontal membrane and cementum can not be drawn in pulp cavity. Since HEMA and glutaraldehyde may cause harm to the pulp cavity, an alternative desensitizer was developed.

• Composites Research
• /
• 제36권3호
• /
• pp.217-223
• /
• 2023

본 연구에서는 폴리아크릴로니트릴계 탄소나노섬유 스펀지의 제조 및 오일 흡착 거동을 조사하였다. 제조된 탄소나노섬유 스펀지는 물과 기름의 혼합용액에서 우수한 선택적 오일 흡착 능력을 보였으며, 탄소나노섬유 스펀지의 재사용시 흡착 능력도 확인하였다. 또한, 흡착제 내부구조에 정렬된 채널을 형성함으로써, 모세관 현상에 의하여 빠른 오일 흡착 거동을 보이는 탄소나노섬유 스펀지를 제조할 수 있었다. 이후 사용 폐기된 탄소나노섬유 스펀지는 질소 분위기에서 800℃로 열처리하여, 4-아미노페놀의 전기화학적 검출을 위한 센서로의 가능성을 검토하였다.

• 한국분말재료학회지
• /
• 제30권3호
• /
• pp.268-275
• /
• 2023

The demand for energy is steadily rising because of rapid population growth and improvements in living standards. Consequently, extensive research is being conducted worldwide to enhance the energy supply. Transpiration power generation technology utilizes the vast availability of water, which encompasses more than 70% of the Earth's surface, offering the unique advantage of minimal temporal and spatial constraints over other forms of power generation. Various principles are involved in water-based energy harvesting. In this study, we focused on explaining the generation of energy through the streaming potential within the generator component. The generator was fabricated using sugar cubes, PDMS, carbon black, CTAB, and DI water. In addition, a straightforward and rapid manufacturing method for the generator was proposed. The PDMS generator developed in this study exhibits high performance with a voltage of 29.6 mV and a current of 8.29 µA and can generate power for over 40h. This study contributes to the future development of generators that can achieve high performance and long-term power generation.

• 한국식품과학회지
• /
• 제14권4호
• /
• pp.342-349
• /
• 1982

송풍식건조과정(送風式乾燥過程) 중의 말쥐치육의 건조기구(乾操機構)와 수분활성(水分活性)과의 관계를 검토하기 위하여 $47.5^{\circ}C$에서 풍속과 공기의 상대습도를 달리하여 실험한 결과를 요약하면 다음과 같다. 전체 건조과정은 정속건조기(定速乾燥期)와 감속건조기(減速乾燥期)로 구분되었다. 정속건조기(定速乾燥期)는 건조표면(乾燥表面)이 수분활성(水分活性) 1.0을 유지하는한 계속되었으며, 온도와 상대습도가 일정할 때 정속건조속도(定速乾燥速度)는 공기의 속도(速度)의 제곱근에 비례하였다. 감속건조기(減速乾燥期)는 건조기구(乾操機構)가 서로 다른 제(第)1 및 제(第)2감속건조기(減速乾燥期)로 구분되었다. 제(第)1감속건조기(減速乾燥期)는 모세관 응축수의 건조표면(乾燥表面)으로의 이동이 불충분한 불포화표면건조기(不飽和表面乾燥期)였으며, 이 때의 건조속도(乾燥速度)는 공기의 온도가 일정할 때 상대습도에 크게 좌우되었다. 제(第)1감속건조기(減速乾燥期)와 제(第)2감속건조기(減速乾燥期)의 변환점에서 표면경화현상(表面硬化現象)이 시작되었다. 상대습도의 변화에 따라 제(第)2감속건조기(減速乾燥期)가 시작될 때의 수분활성(水分活性)과 수분함량(水分含量)은 각각 다른 값을 나타내었다. 제(第)2감속건조기(減速乾燥期)는 다시 건조기구(乾操機構)를 달리하는 두 개의 건조기(乾燥期)로 구분되었다. 제(第)2감속건조기(減速乾燥期)의 1단계는 말쥐치육 내부의 모세관 응축수가 건조표면(乾燥表面)으로 확산, 증발하여 건조가 진행되었으며, 이때의 수분의 확산계수는 $47.5^{\circ}C$에서 $2.89{\cdot}10^{-10}m^2/sec$였다. 표면경화현상(表面硬化現象)은 말쥐치육의 수분활성(水分活性)이 0.7에 이를때까지 계속되었다. 제(第)2감속건조기(減速乾燥期)의 2단계는 수분활성(水分活性) 0.45에서 시작되었다. 이 때의 건조는 말쥐치육 내부에 다분자층(多分子層)으로 흡착(吸着)한 결합수의 건조표면(乾燥表面)으로의 확산, 증발에 의하여 진행되었다. 흡착수분(吸着水分)의 분자층(分子層)의 수는 4였으며, $47.5^{\circ}C$에서의 확산계수는 $4.38{\cdot}10^{-11}m^2/sec$였다.

• 한국조경학회지
• /
• 제45권1호
• /
• pp.117-126
• /
• 2017

간척지 갯벌지반 식재 수목에 생장 저해하는 토양염분의 이동을 차단하는 염분차단재, 염분차단 위치 및 염분차단 두께에 따른 토양염분의 경시적 변화에 대하여 조사 분석하였다. 7가지의 토양염분이동 차단재료, 3가지의 차단두께 유형 그리고 토양염분이동차단 3가지 유형별로 염분의 변화가 다르게 나타났다. 갯벌지반은 초기에 토양염분이 높았으나, 점차 낮아졌다. 식생토인 객토는 초기에 토양염분이 낮았지만, 토양염분이동 무차단구에서는 점차적으로 토양염분이 높아졌고, 토양염분이동 차단구에서 전면차단구는 토양염분의 변화가 크지 않지만, 토양염분이동 벽면차단이나 밑바닥 차단만한 곳에서는 토양염분이 높아졌다. 토양염분은 강우시에는 토양염분이 낮아지나, 가뭄기에나 겨울철에는 토양염분이 높아지는 현상이 있었다. 토양염분이동 차단재료별 토양염분이동 차단능은 쇄석, 준설토, 목질칩이 다른 재료들 보다 우수하였다. 토양염분이동 차단벽은 최소한 20cm 이상 되어야 효과가 있는 것으로 나타났다.

• 한국농공학회지
• /
• 제26권2호
• /
• pp.47-58
• /
• 1984

The study results of the mosture consumption character and irrigation effect of tomato, red pepper and chinese cabbage, in case the soil moisture is kept with different moisture content by the soil properties(loam, sandy loam, sand), are summarized as follows: 1. The available rainfall under bare soil condition had an order of sand>sandy loam> loam and their average was 64.2%. 2. Total moisture consumption under bare soil condition had an order of loam>sandy loam>sand and their average was 4.2mm. 3. The amount of irrigated water to keep certain soil moisture under bare soil condition showed minimum in sand and maximum in loam. It is considered because the capillary phenomenon was more developed in loam. 4. Total moisture consumption of tomatoes under premature cultivation showed 925mm in maximum and had on order of loam>sandy loam>sand. In the aspect of re-irrigation point, it had an order of PF 1.5> PF 1.7>PF 2.1. In case the twenty years's drought frequency was taken into account, the target amount of irrigation water meeded for premature cultivation was 916mm and its average daily moisture consumption was 10.8mm. 5. Total moisture consumption of red pepper under open cultivation showed 1145mm in maximum and had an order of loam>Sandy loam>sand. In the aspect of re-irrigation frequency was taken into consideration the target amount of irrigation water was 1,174.8mm and its average daily moisture consumption was 8.0mm. 6. Total moisture consumption of autumn chinese cabbages was 349mm in maximum and had an order of loam>sandy loam>sand. In the aspect of re-irrigation point, it had an order of PF 1.5>PF 2.1>PF 2.7. In case the twenty year's drought frequency was taken into account, the target amount of irrigation water needed for chinese cabbage cultivation was 259.5mm and its average daily moisture consumption was 6.5mm. 7. It is effective to keep the soil moisture of tomato from PF 1.5 to PF 2.1 in loam and the soil moisture control was effective in sandy loam than red pepper and chinese cabbage. In sand, the production was severaly decreased and the re-irrigation point of PF 1.5 was effective.