• Journal of Energy Engineering
• /
• v.5 no.1
• /
• pp.87-92
• /
• 1996

This paper formulates dynamic optimization model for Time-Of-Use Rates when a electric power system consists of three generators and a rating period is divided into three sub-periods. We use Pontryagin's Maximum Principle to derive optimal price and investment policy. Particularly the cross-price elasticities of demand are considered in the objective function. We get the following results. First, the price is equal to short-run marginal cost when the capacity is sufficient. However, if the capacity constraint is active, the capacity cost is included in the price. Therefore it is equal to the long-run marginal cost. Second, The length of rating period affects allocation of capacity cost for each price. Third, the capacity investment in dynamic optimization is proportional to the demand growth rate of electricity. However the scale of investment is affected by not only its own demand growth rate but also that of other rating period.

• Journal of Korean Society of Forest Science
• /
• v.95 no.6
• /
• pp.705-710
• /
• 2006

We investigated seasonal photosynthetic capacity and water use efficiency changes of Korean fir (Abies koreana Wils.) trees located at three sites around the peak of Mt. Halla, Witseorum, Youngsil and Jindallebat. At each sites, we chose healthy and declining individuals to examine the differences of physiological characteristics between them. Net photosynthetic capacity in $15^{\circ}C$ were lower than those of $20^{\circ}C$ and $25^{\circ}C$. The difference of net photosynthetic capacity between healthy and damaged trees was clear in June and August but damaged trees recovered with passing of the time. There was no difference between healthy and damaged trees in September on photosynthetic rate. Generally, water use efficiency (WUE) of damaged trees was higher than healthy trees.

• Journal of Communications and Networks
• /
• v.5 no.2
• /
• pp.104-115
• /
• 2003

It is well known that Multiple Input Multiple Output (MIMO) systems offer the promise of achieving very high spectrum efficiencies (many tens of bit/s/Hz) in a mobile environment. The gains in MIMO capacity are sensitive to the presence of spatial and temporal correlation introduced by the radio environment. In this paper, we examine how MIMO capacity is influenced by a number of factors e.g., a) temporal correlation b) various combinations of low/high spatial correlations at either end, c) combined spatial and temporal correlations. In all cases, we compare the channel capacity that would be achievable under independent fading. We investigate the behaviour of "capacity fades," examine how often the capacity experiences the fades, develop a method to determine level crossing rates and average fade durations and relate these to antenna numbers. We also evaluate the influence of channel correlation on the capacity autocorrelation and assess the fit of a Gaussian random process to the temporal capacity sequence. Finally we note that the particular spatial correlation structure of the MIMO channel is influenced by a large number of factors. For simplicity, it is desirable to use a single overall correlation measure which parameterizes the effect of correlation on capacity. We verify this single parameter concept by simulating a large number of different spatially correlated channels.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.573-576
• /
• 2001

In the research fields of energy storage, and more specifically of supplying high powers, electrochemical supercapacitor have been among the most studied systems for many years. One of the possible applications is in electric vehicles. We have been working on electronically conducting polymers for use as active materials for electrodes in supercapacitors. These polymers have the ability of doping and undoping with rather fast kinetics and have an excellent capacity for energy storage. polythiophene (Pth) and polyparafluorophenylthiophene (PFPT) have been chemically synthesized for use as active materials in supercapacitor electrodes. Electrochemical characterization has been performed by cyclic voltammetry and an electrode study has been achieved to get the maximun capacity out of the polymers and give good cyclability. specific capacity values of 7mAh/g and 40mAh/g were obtained for PFPT and polythiophene, respectively. Supercapacitors have been built to characterize this type of system. Energy storage levels of 260F/g were obtained with Pth and 110F/g with PFPT

• Ocean and Polar Research
• /
• v.28 no.4
• /
• pp.439-449
• /
• 2006

This study was aimed at measuring the fishing capacity of Powered Anchovy Drag Net Fisheries (PADNF) in Korea using Peak-to-Peak(PTP) and Data Envelopment Analysis(DEA) methods recommended by FAO. In the analysis, both fishing capacities of total PADNF and individual PADNF vessels were measured with time series data and cross sectional data, respectively. In addition, the results of the DEA measurement were analyzed in order to determine reduction levels of fishing capacity. In case of total PADNF, the results by rn and DEA methods showed a similar rate of capacity utilization (79%), indicating the capacity was not utilized enough. In addition, the sensitivity analysis suggested that the number of vessels should be reduced by 20%, and the gross tonnage and the horse power should be reduced by 20% and 21%, respectively if the current catch is to stay at the 2004 level. The DEA results on individual PADNF vessels indicated the capacity utilization was 75% on average, showing some differences in capacity utilization among vessels (31%-100%). The results of the study would be useful for measuring production efficiency in PADNF. They would also provide good policy information for efficient use of resources and capacity reduction levels, which are useful far vessel buyback programs of coastal and offshore fisheries.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.451-456
• /
• 2001

Today, most of data storage devices use digital storage type. In this thesis, a new digital storage media called rainbow disk was introduced. It doesn't use 1-bit digital signal, but 2 or 4 bits digital signal using colors, so it can increase $2{\sim}4$ times more capacity than existing digital media in case of having the same spot size. It has made possible by means of technological advancement of devices and software. The photo quality paper was used for writing data by color inkjet or laser printing, and high resolution scanner was used for reading data. To extract data from image, the converting program was used. This paper shows the concept of rainbow disk as well as its performance and capacity. Axiomatic design was used for evaluating and developing the whole system.

• Geomechanics and Engineering
• /
• v.6 no.1
• /
• pp.33-45
• /
• 2014

Use of geotextile as reinforcement material to improve the weak soil is a popular method these days. Tensile strength of geotextile and the soil-geotextile interaction are the major factors which influence the improvement of the soil. Change in fine content within the sand can change the interface behavior between soil and geotextile. In the present paper, the bearing capacity of unreinforced and geotextile-reinforced sand with different percentages of fines has been studied. A series of model tests have been carried out and the load settlement curves are obtained. The ultimate load carrying capacity of unreinforced and reinforced sand with different percentages of fines is compared. The interface behavior of sand and geotextile with various percentages of fines is also studied. It is observed that sand having around 5% of fine is suitable or permissible for bearing capacity improvement due to the application of geosynthetic reinforcement. The effectiveness of the reinforcement in load carrying capacity improvement decreases due to the addition of excessive amount of fines.

• Safety and Health at Work
• /
• v.11 no.4
• /
• pp.533-536
• /
• 2020

Strengthening of the health system is a safety imperative, especially in a crisis as caused by the ongoing COVID-19 pandemic. While there is a need for enhancing the number and skill sets of the public health professionals, especially the frontline workers, it will be prudent to use the digital health technologies, including artificial intelligence, in enhancing the capacity of the healthcare professional education and delivery. However, it has to be ensured that an ethical and safe approach is adopted to develop and use digital health technology and, ethically appropriate training is imparted, to enhance the capacity of the human resources for health, leading to an overall health system strengthening.

• Structural Engineering and Mechanics
• /
• v.51 no.4
• /
• pp.565-579
• /
• 2014

The pullout capacity of plate anchors has been studied extensively over the past 40 years. However, very few studies have attempted to calculate the pullout capacity of anchors in sandy slopes. In this paper, three upper bound approaches are used to study the effect of a sloping ground surface and friction angle on pullout capacity and failure of plate anchors. This includes the use of; simple upper bound mechanisms; the block set mechanism approach; and finite element upper bound limit analysis. The aim of this research is to better understand the various failure mechanisms and to develop a simple methodology for estimating the pullout capacity of anchors in sandy slopes.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.64 no.1
• /
• pp.1-13
• /
• 2022

In Korea, attention is being paid to the use of renewable energy in the livestock industry, and Ground Source Heat Pump (GSHP), which is advantageous for temperature control, is considered as one of the ways to reduce the use of fossil fuels. But GSHP is expensive to install, which proper capacity calculation is required. GSHP capacity is related to its maximum energy load. Energy loads are affected by climate characteristics and time, so dynamic analysis is required. In this study, the optimal capacity of GSHP was calculated by calculating the heating and cooling load of pig farms using BES (Building Energy Simulation) and economic analysis was performed. After designing the inside of the pig house using TRNSYS, one of the commercial programs of the BES technique, the energy load was calculated based on meteorological data. Through the calculated energy load, three heating devices and GSHP used in pig farms were analyzed for economic feasibility. As a result, GSHP's total cost of ownership was the cheapest, but the installation cost was the highest. In order to reduce the initial cost of GSHP, the capacity of GSHP was divided, and a scenario was created in which some of it was used as an auxiliary heating device, and economic analysis was conducted. In this study, a method to calculate the proper capacity of GSHP through dynamic energy analysis was proposed, and it can be used as data necessary to expand the spread of GSHP.