• 에너지공학
• /
• 제5권1호
• /
• pp.87-92
• /
• 1996

본 연구는 전력계통이 3개의 발전기로 구성되었고, 요금적용 시간대가 3개인 경우 동태적 최적화를 이용한 최적 가격 및 투자 정책을 도출하기 위한 것이다. 이를 위하여 최대원리법(Maximum Principle)을 이용하였으며, 종전에는 수요함수에서 고려되지 않았던 교차가격 탄력성을 수요함수에 포함시켰다. 분석 결과 다음과 같은 결론을 얻을 수 있다. 첫째, 설비가 충분한 경우 각 시간대의 최적 가격은 단기한계비용과 일치한다. 그러나 시간이 경과함에 따라 수요증가에 의하여 설비제약이 활성화되면 각 시간대의 가격은 설비비를 포함하는 장기한계비용 형태를 띄게 된다 둘째, 각 시간대에 있어서 발전기의 설비비의 분담은 요금적용 시간대의 길이에 의하여 영향을 받는다. 즉, 해당 시간대의 요금적용 시간대가 길어지면 길어질수록 해당시간대에 대응되는 설비의 설비비 분담은 감소하고, 짧아지면 질수록 설비분담은 높아지게 된다. 셋째, 동태적 분석에서의 설비투자는 기본적으로 각 시간대의 수요증가율과 같은 비율로 증가하며, 또한 신규설비 투자규모는 각 시간대의 투자설비를 서로 분담하게 된다.

• 한국산림과학회지
• /
• 제95권6호
• /
• pp.705-710
• /
• 2006

한라산의 윗세오름, 영실(윗세오름과 영실사이), 진달래밭 등 3개 지역에서 구상나무의 광합성능력과 수분이용효율의 특성을 알아보기 위하여 시기별, 온도별, 그리고 지역별 건전개체와 쇠약한 개체에 대하여 조사를 수행하였다. 일반적으로 구상나무의 광합성능력은 $15^{\circ}C$일 때가 $20^{\circ}C$, $25^{\circ}C$일 때 보다 높았다, 6월과 8월의 경우 건전개체와 쇠약개체간의 광합성능력의 차이가 뚜렷했지만 9월에 쇠약개체의 광합성능력이 다시 회복되었다. 모든 개체에서 수분이용효율은 쇠약개체가 건전개체에 비해 높았다.

• 환경영향평가
• /
• 제33권4호
• /
• pp.155-163
• /
• 2024

연구목적은 오픈스페이스 토지이용 공간패턴이 도시 열저감 관점에서 어떤 의미를 갖는지 토지이용 시나리오를 이용하여 가능성 수준에서 살펴보는 것이다. 연구방법은 다음과 같다: (1) InVEST Urban Cooling Model을 이용, 5개 토지이용 시나리오별 Cooling Capacity Index 산출, (2) Guidos Spatial Pattern Toolbox를 사용, 토지이용 시나리오별 각각의 오픈스페이스 Entropy와 형태학적 공간패턴 산출, (3) InVEST 결과값과 Guidos 결과값들의 Spearman rank correlation analysis. 연구결과는 다음과 같다. Cooling Capacity Index와 오픈스페이스 면적비 순위 상관성은 보통이며(rho=0.50), 그 외 지표들은 낮은 것으로 나타났다. 이는 도시 열저감 관점에서는 오픈스페이스 총량만이 큰 의미를 가질 가능성이 있으며, 그 외 오픈스페이스 입지 공간패턴은 도시 열환경 관리 관점에서 큰 의미는 없을 수 있다는 가능성이 관찰되었다.

• Journal of Communications and Networks
• /
• 제5권2호
• /
• pp.104-115
• /
• 2003

It is well known that Multiple Input Multiple Output (MIMO) systems offer the promise of achieving very high spectrum efficiencies (many tens of bit/s/Hz) in a mobile environment. The gains in MIMO capacity are sensitive to the presence of spatial and temporal correlation introduced by the radio environment. In this paper, we examine how MIMO capacity is influenced by a number of factors e.g., a) temporal correlation b) various combinations of low/high spatial correlations at either end, c) combined spatial and temporal correlations. In all cases, we compare the channel capacity that would be achievable under independent fading. We investigate the behaviour of "capacity fades," examine how often the capacity experiences the fades, develop a method to determine level crossing rates and average fade durations and relate these to antenna numbers. We also evaluate the influence of channel correlation on the capacity autocorrelation and assess the fit of a Gaussian random process to the temporal capacity sequence. Finally we note that the particular spatial correlation structure of the MIMO channel is influenced by a large number of factors. For simplicity, it is desirable to use a single overall correlation measure which parameterizes the effect of correlation on capacity. We verify this single parameter concept by simulating a large number of different spatially correlated channels.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.573-576
• /
• 2001

In the research fields of energy storage, and more specifically of supplying high powers, electrochemical supercapacitor have been among the most studied systems for many years. One of the possible applications is in electric vehicles. We have been working on electronically conducting polymers for use as active materials for electrodes in supercapacitors. These polymers have the ability of doping and undoping with rather fast kinetics and have an excellent capacity for energy storage. polythiophene (Pth) and polyparafluorophenylthiophene (PFPT) have been chemically synthesized for use as active materials in supercapacitor electrodes. Electrochemical characterization has been performed by cyclic voltammetry and an electrode study has been achieved to get the maximun capacity out of the polymers and give good cyclability. specific capacity values of 7mAh/g and 40mAh/g were obtained for PFPT and polythiophene, respectively. Supercapacitors have been built to characterize this type of system. Energy storage levels of 260F/g were obtained with Pth and 110F/g with PFPT

• Ocean and Polar Research
• /
• 제28권4호
• /
• pp.439-449
• /
• 2006

This study was aimed at measuring the fishing capacity of Powered Anchovy Drag Net Fisheries (PADNF) in Korea using Peak-to-Peak(PTP) and Data Envelopment Analysis(DEA) methods recommended by FAO. In the analysis, both fishing capacities of total PADNF and individual PADNF vessels were measured with time series data and cross sectional data, respectively. In addition, the results of the DEA measurement were analyzed in order to determine reduction levels of fishing capacity. In case of total PADNF, the results by rn and DEA methods showed a similar rate of capacity utilization (79%), indicating the capacity was not utilized enough. In addition, the sensitivity analysis suggested that the number of vessels should be reduced by 20%, and the gross tonnage and the horse power should be reduced by 20% and 21%, respectively if the current catch is to stay at the 2004 level. The DEA results on individual PADNF vessels indicated the capacity utilization was 75% on average, showing some differences in capacity utilization among vessels (31%-100%). The results of the study would be useful for measuring production efficiency in PADNF. They would also provide good policy information for efficient use of resources and capacity reduction levels, which are useful far vessel buyback programs of coastal and offshore fisheries.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.451-456
• /
• 2001

Today, most of data storage devices use digital storage type. In this thesis, a new digital storage media called rainbow disk was introduced. It doesn't use 1-bit digital signal, but 2 or 4 bits digital signal using colors, so it can increase $2{\sim}4$ times more capacity than existing digital media in case of having the same spot size. It has made possible by means of technological advancement of devices and software. The photo quality paper was used for writing data by color inkjet or laser printing, and high resolution scanner was used for reading data. To extract data from image, the converting program was used. This paper shows the concept of rainbow disk as well as its performance and capacity. Axiomatic design was used for evaluating and developing the whole system.

• Geomechanics and Engineering
• /
• 제6권1호
• /
• pp.33-45
• /
• 2014

Use of geotextile as reinforcement material to improve the weak soil is a popular method these days. Tensile strength of geotextile and the soil-geotextile interaction are the major factors which influence the improvement of the soil. Change in fine content within the sand can change the interface behavior between soil and geotextile. In the present paper, the bearing capacity of unreinforced and geotextile-reinforced sand with different percentages of fines has been studied. A series of model tests have been carried out and the load settlement curves are obtained. The ultimate load carrying capacity of unreinforced and reinforced sand with different percentages of fines is compared. The interface behavior of sand and geotextile with various percentages of fines is also studied. It is observed that sand having around 5% of fine is suitable or permissible for bearing capacity improvement due to the application of geosynthetic reinforcement. The effectiveness of the reinforcement in load carrying capacity improvement decreases due to the addition of excessive amount of fines.

• Safety and Health at Work
• /
• 제11권4호
• /
• pp.533-536
• /
• 2020

Strengthening of the health system is a safety imperative, especially in a crisis as caused by the ongoing COVID-19 pandemic. While there is a need for enhancing the number and skill sets of the public health professionals, especially the frontline workers, it will be prudent to use the digital health technologies, including artificial intelligence, in enhancing the capacity of the healthcare professional education and delivery. However, it has to be ensured that an ethical and safe approach is adopted to develop and use digital health technology and, ethically appropriate training is imparted, to enhance the capacity of the human resources for health, leading to an overall health system strengthening.

• Structural Engineering and Mechanics
• /
• 제51권4호
• /
• pp.565-579
• /
• 2014

The pullout capacity of plate anchors has been studied extensively over the past 40 years. However, very few studies have attempted to calculate the pullout capacity of anchors in sandy slopes. In this paper, three upper bound approaches are used to study the effect of a sloping ground surface and friction angle on pullout capacity and failure of plate anchors. This includes the use of; simple upper bound mechanisms; the block set mechanism approach; and finite element upper bound limit analysis. The aim of this research is to better understand the various failure mechanisms and to develop a simple methodology for estimating the pullout capacity of anchors in sandy slopes.