• Advances in nano research
• /
• 제3권1호
• /
• pp.49-54
• /
• 2015

The structure represents symmetrical metal electrode (gate 1) - front $SiO_2$ layer - n-Si nanowire FET - buried $SiO_2$ layer - metal electrode (gate 2). At the symmetrical gate voltages high conductive regions near the gate 1 - front $SiO_2$ and gate 2 - buried $SiO_2$ interfaces correspondingly, and low conductive region in the central region of the NW are formed. Possibilities of applications of nanosize FETs at the deep inversion and depletion as a distributed capacitance are demonstrated. Capacity density is an order to ${\sim}{\mu}F/cm^2$. The charge density, it distribution and capacity value in the nanowire can be controlled by a small changes in the gate voltages. at the non-symmetrical gate voltages high conductive regions will move to corresponding interfaces and low conductive region will modulate non-symmetrically. In this case source-drain current of the FET will redistributed and change current way. This gives opportunity to investigate surface and bulk transport processes in the nanosize inversion channel.

• 설비공학논문집
• /
• 제2권3호
• /
• pp.218-225
• /
• 1990

Studies on the performance of a heat pump using non-azeotropic refrigerant mixtures are done. In order to estimate the thermodynamic properties for the selected non-azeotropic refrigerant mixtures including R22/R152a, R22/R142b, R22/R114 and R13B1/R152a, Peng-Robinson equation of state is adopted. The pressure-enthalpy diagram and the temperature-entropy diagram are plotted for each refrigerant mixture. Considerations on the capacity modulation for the heat pump system using refrigerant mixtures are taken into. Results show that when the heating load varies, the possibility for the capacity modulation is found in the heat pump system using a compressor with constant volume flow rate. Under a constant heating capacity condition in the heat pump system, the coefficient of performance increases when the refrigerant mixtures are used. The volume flow rate decreases as the mass fraction of lower boiler increases in this case.

• 한국통신학회논문지
• /
• 제39A권5호
• /
• pp.215-219
• /
• 2014

In holographic data storage (HDS), a high transmission rate is accomplished through the use of a charge coupled device array for reading two-dimensional (2D) pixel image data. Although HDS has many advantages in terms of storage capacity and data transmission rates, it also features problems, such as 2D intersymbol interference (ISI) by neighboring pixels and interpage interference (IPI) by multiple images stored in the same holographic volume. Modulation codes can be used to remove these problems. We introduce a 2D 8/9 error-correcting modulation code. The proposed modulation code exploits the trellis-coded modulation scheme, and the code rate is larger (about 0.889) than that of the conventional 6/8 balanced modulation code (an increase of approximately 13.9%). The performance of the bit error rate (BER) with the proposed scheme was improved compared with that of the 6/8 balanced modulation code and the simple 8/9 code without the trellis scheme.

• Journal of Electrical Engineering and Technology
• /
• 제13권1호
• /
• pp.476-484
• /
• 2018

The high capacity audio watermarking algorithms are facing a main challenge in satisfying the robustness against attacks especially on de-synchronization attacks. In this paper, a robust and a high capacity algorithm is proposed using segment selection, Stationary Wavelet Transform (SWT) and the Quantization Index Modulation (QIM) techniques along with new synchronization mechanism. The proposed algorithm provides enhanced trade-off between robustness, imperceptibility, and capacity. The achieved watermarking improves the reliability of the available watermarking methods and shows high robustness towards signal processing (manipulating) attacks especially the de-synchronization attacks such as cropping, jittering, and zero inserting attacks. For imperceptibility evaluation, high signal to noise ratio values of above 22 dB has been achieved. Also subjective test with volunteer listeners shows that the proposed method has high imperceptibility with Subjective Difference Grade (SDG) of 4.76. Meanwhile, high rational capacity up to 176.4 bps is also achieved.

• 전자공학회논문지
• /
• 제53권11호
• /
• pp.9-14
• /
• 2016

홀로그래픽 데이터 저장장치 (HDSS)는 한 픽셀에 1비트 이상의 데이터를 저장 가능하며 전송 속도 및 저장 용량을 증가시키는 장점이 있다. 하지만 2차원적으로 생기는 인접 심볼 간의 간섭 (ISI) 및 페이지 간의 간섭 (IPI)이 발생한다. 본 논문에서는 홀로그래픽 데이터 저장장치에서 부호율이 1.33 bit/pixel이면서 코드워드의 밀도가 균일한 부호를 제안하였다. 제안된 저밀도 ON 픽셀 4/6 2차원 균형 변조부호는 기존의 2/3, 6/9 변조부호와 비교하여 비슷한 성능을 보이지만, 한 페이지에 기록되는 ON 픽셀의 비율을 낮춤으로써 체적 내에 페이지 수를 늘려 저장 용량을 증가시킬 뿐만 아니라 코드워드의 밀도가 균일하여 인접 페이지 간의 간섭을 줄일 수 있다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
• /
• pp.5-9
• /
• 2003

Conventional variable-speed Induction motor drives with inverters are subject to detrimental effect of zero-sequence voltages, such a shaft voltage and bearing current. This paper presents a way of the suppression of the zero-sequence components in multilevel H-bridge inverters. First examined Is the inherent zero-sequence characteristic of the conventional subharmonic PW method. Then it is shown that the zero-sequence voltage can be eliminated with proper -selection of switching states with space vector modulation. Although this method alone restricts the linear modulation range of control, a combination of the proposed method and the minimum switching method appears to be effective in suppressing the zero-sequence voltage to minimum level while maintaining the linear control range.

• 한국전자파학회논문지
• /
• 제19권6호
• /
• pp.669-676
• /
• 2008

MIMO-OFDMA 시스템에서 자원 할당의 최적화 문제가 거론되고 있다. 본 논문은 SFC 방식 아래 채널에 대한 정보를 가지고 적응 변조 및 부호 기법과 전력 제어 기법을 적용하여 전체 시스템 처리량의 최대화에 목표를 두었다. 첫 번째로 수신 받은 채널에 대한 정보를 기반으로 각 서브 채널의 전력 레벨이 결정된다. 그 다음으로는 변조 타입에 맞게 서브캐리어가 할당되어진다. 시뮬레이션 결과는 실제로 전송되어진 데이터 용량 측면에서 기존의 알고리즘보다 제안한 알고리즘이 더 나은 성능을 보인다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권12호
• /
• pp.3310-3329
• /
• 2023

This work designs an eighteen-channel bidirectional Intensity Modulation with Direct Detection (IM/DD) Wavelength Division Multiplexing-Passive Optical Network (WDM-PON) system. The proposed system meets the requirement of the ITU-T 5G fronthaul link suggested design in G-series Recommendations-Supplement 66. The newly designed system, with a 25Gb/s/λ data rate (450Gbps as a system capacity), has been tested and simulated using OptiSystem V.19 software. The system has been evaluated by the BER with respect to variable the optical span and CW laser power. Based on the ITU-T recommendations, the simulation results demonstrate that this system might be used as an F1 and as an Fx 5G fronthaul link for functional split choices starting from options 1 to 7a. These options are required under 25Gbps/λ for each upstream and downstream link direction. Furthermore, the proposed system utilized a bidirectional single-mode optical fiber within short optical spans of up to 10 km. The proposed system is characterized by a low-cost, simple, DSP-free and amplifier-free system with a reasonable system capacity.

• 융합정보논문지
• /
• 제11권5호
• /
• pp.9-16
• /
• 2021

이진 변조 비직교 다중접속에서 1+1 용량 영역을 달성하는 주제에 대한, 다시 말해, 총 전력은 얼마나 필요한가와 이때 전력은 어떻게 할당해야 되는가에 대한 연구가 다소 미흡하다. 본 논문에서는, 허용 가능한 손실범위 안에서, 2PAM 비직교 다중 접속의 1+1 용량 영역을 달성할 수 있는 평균 총 전송 전력을 고찰한다. 다음으로, 충분한 평균 총 전력을 기반으로 1+1 용량 영역을 달성할 수 있는 전력 할당 계수를 계산한다. 그리고, 수치적 결과를 통해서 0.008 미만의 허용 가능한 손실 범위 안에서, 근접 1+1 용량 영역이 달성됨을 보여준다. 또한, 수치상으로 근접 1+1 용량 영역을 달성하는 양 사용자의 전력 할당 계수를 계산한다. 결론적으로 2PAM 비직교 다중 접속이 근접 1+1 용량 영역에서 동작하기 위해, 적절한 전력 할당과 함께, 적당한 총 전력이 비직교 다중접속 설계에서 계산될 수 있다.

• 설비공학논문집
• /
• 제12권5호
• /
• pp.446-475
• /
• 2000

Performance of a water-to-water multi-type heat pump system using R22 has been experimentally investigated. Total refrigerant flow rate was adjusted with a variable speed compressor and the refrigerant flow rate for two indoor units were controlled by electronic expansion valves. Evaporator outlet pressure of refrigerant and indoor unit outlet temperatures of secondary fluid were selected as controlled variables. Experiments were carried out for both cooling and heating modes using PID control method. Results show that the multi-type heat pump system can be adequately controlled by keeping control gains at certain levels for various operating conditions.