• Journal of Distribution Research
• /
• v.15 no.3
• /
• pp.1-34
• /
• 2010

Introduction The purpose of this research is to develop overall model which involves the effect of ongoing support services by franchisor on franchisee's relationship quality(trust, satisfaction, and commitment) and business performance(financial and non-financial performance), and to investigate the relationships among trust, satisfaction, commitment, financial and non-financial performance. This study also suggests franchise business or franchise system should be based on long-term orientation between franchisor and franchisee rather than short-term orientation, or transactional relationship, and proposes the most effective way of providing on-going support services by franchisor with franchisee thru symbiotic relationship among franchisor and franchisee Research Model and Hypothesis The research model as Figure 1 shows the variables on-going support services which affect the relationship quality between franchisor and franchisee such as trust, satisfaction, and commitment, and also analyze the effects of relationship quality on business performance including financial and non-financial performance We established 12 hypotheses to test as follows; Relationship between on-going support services and trust H1: On-going support services factors (product category & price, logistics service, promotion, information providing & problem solving capability, supervisor's support, and education & training support) have positive effect on franchisee's trust. Relationship between on-going support services and satisfaction H2: On-going support services factors (product category & price, logistics service, promotion, information providing & problem solving capability, supervisor's support, and education & training support) have positive effect on franchisee's satisfaction. Relationship between on-going support services and commitment H3: On-going support services factors (product category & price, logistics service, promotion, information providing & problem solving capability, supervisor's support, and education & training support) have positive effect on franchisee's commitment. Relationship among relationship quality: trust, satisfaction, and commitment H4: Franchisee's trust has positive effect on franchisee's satisfaction. H5: Franchisee's trust has positive effect on franchisee's commitment. H6: Franchisee's satisfaction has positive effect on franchisee's commitment. Relationship between relationship quality and business performance H7: Franchisee's trust has positive effect on franchisee's financial performance. H8: Franchisee's trust has positive effect on franchisee's non-financial performance. H9: Franchisee's satisfaction has positive effect on franchisee's financial performance. H10: Franchisee's satisfaction has positive effect on franchisee's non-financial performance. H11: Franchisee's commitment has positive effect on franchisee's financial performance. H12: Franchisee's commitment has positive effect on franchisee's non-financial performance. Method The on-going support services were defined as an organized system of continuous supporting services by franchisor for the purpose of satisfying the expectation of franchisee based on long-term orientation and classified into six constructs such as product category & price, logistics service, promotion, providing information & problem solving capability, supervisor's support, and education & training support. The six constructs were measured agreement using a 7-point Likert-type scale (1 = strongly disagree to 7 = strongly agree)as follows. The product category & price was measured by four items: menu variety, price of food material provided by franchisor, and support for developing new menu. The logistics service was measured by six items: distribution system of franchisor, return policy for provided food materials, timeliness, inventory control level of franchisor, accuracy of order, and flexibility of emergency order. The promotion was measured by five items: differentiated promotion activities, brand image of franchisor, promotion effect such as customer increase, long-term plan of promotion, and micro-marketing concept in promotion. The providing information & problem solving capability was measured by information providing of new products, information of competitors, information of cost reduction, and efforts for solving problems in franchisee's operations. The supervisor's support was measured by supervisor operations, frequency of visiting franchisee, support by data analysis, processing the suggestions by franchisee, diagnosis and solutions for the franchisee's operations, and support for increasing sales in franchisee. Finally, the of education & training support was measured by recipe training by specialist, service training for store people, systemized training program, and tax & human resources support services. Analysis and results The data were analyzed using Amos. Figure 2 and Table 1 present the result of the structural equation model. Implications The results of this research are as follows: Firstly, the factors of product category, information providing and problem solving capacity influence only franchisee's satisfaction and commitment. Secondly, logistic services and supervising factors influence only trust and satisfaction. Thirdly, continuing education and training factors influence only franchisee's trust and commitment. Fourthly, sales promotion factor influences all the relationship quality representing trust, satisfaction, and commitment. Fifthly, regarding relationship among relationship quality, trust positively influences satisfaction, however, does not directly influence commitment, but satisfaction positively affects commitment. Therefore, satisfaction plays a mediating role between trust and commitment. Sixthly, trust positively influence only financial performance, and satisfaction and commitment influence positively both financial and non-financial performance.

• Microbiology and Biotechnology Letters
• /
• v.46 no.4
• /
• pp.360-371
• /
• 2018

Extracts and fractions of Anemarrhena asphodeloides Bunge were prepared and their physiological activities and components were analyzed. Antimicrobial activities of the ethyl acetate and aglycone fractions were $78{\mu}g/ml$ and $31{\mu}g/ml$, respectively, for Staphylococcus aureus and $156{\mu}g/ml$ and $125{\mu}g/ml$, respectively, for Pseudomonas aeruginosa. 1,1-Diphenyl-2-picrylhydrazyl free radical scavenging activities ($FSC_{50}$) of 50% ethanol extract, ethyl acetate fraction, and aglycone fraction of A. asphodeloides extracts were $146.2{\mu}g/ml$, $23.19{\mu}g/ml$, and $71.06{\mu}g/ml$, respectively. The total antioxidant capacity ($OSC_{50}$) in an $Fe^{3+}$-EDTA/hydrogen peroxide ($H_2O_2$) system were $17.5{\mu}g/ml$, $1.5{\mu}g/ml$, and $1.4{\mu}g/ml$, respectively. The cytoprotective effect (${\tau}_{50}$) in $^1O_2$-induced erythrocyte hemolysis was 181 min with $4{\mu}g/ml$ of the aglycone fraction. The ${\tau}_{50}$ of the aglycone fraction was approximately 4-times higher than that of (+)-${\alpha}$-tocopherol (${\tau}_{50}$, 41 min). Analysis of $H_2O_2$-induced damage of HaCaT cells revealed that the maximum cell viabilities for the 50% ethanol extract, ethyl acetate fraction, and aglycone fraction were 86.23%, 86.59%, and 89.70%, respectively. The aglycone fraction increased cell viability up to 11.53% at $1{\mu}g/ml$ compared to the positive control treated with $H_2O_2$. Analysis of ultraviolet B radiation-induced HaCaT cell damage revealed up to 41.77% decreased intracellular reactive oxygen species in the $2{\mu}g/ml$ aglycone fraction compared with the positive control treated with ultraviolet B radiation. The findings suggest that the extracts and fractions of A. asphodeloides Bunge have potential applications in the field of cosmetics as natural preservatives and antioxidants.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.18 no.4
• /
• pp.207-222
• /
• 2023

In order to improve employment rates, most universities operate programs to strengthen students' employment and entrepreneurship, regardless of whether they are selected as the Leading Industry-Innovative University (LINC) or not. In particular, in the case of non-metropolitan universities are risking their lives to improve employment rates. In order to overcome the limitations of university establishment type and university location, which absolutely affect the employment rate, we are operating a startup education & startup support program in order to strengthen employment and entrepreneurship, and capstone design & field training as industry-academia-linked education programs are always available. Although there are studies on effectiveness verification centered on LINC (Leaders in Industry-University Cooperation) in previous studies, but a longitudinal study was conducted on all factors of university factors, startup education & startup support, and capstone design & field training as industry-university-linked education programs as factors affecting the employment rate based on public disclosure indicators. No cases of longitudinal studies were reported. This study targets 116 universities that satisfy the conditions based on university disclosure indicators from 2018 to 2020 that were recently released on university factors, startup education & startup support, and capstone design & field training as industry-academia-linked education programs as factors affecting the employment rate. We analyzed the differences between the LINC (Leaders in Industry-University Cooperation) 51 participating universities and 64 non-participating universities. In addition, considering that there is no historical information on the overlapping participation of participating students due to the limitations of public indicators, the Exposure Effect theory states that long-term exposure to employment and entrepreneurship competency enhancement programs will affect the employment rate through competency enhancement. Based on this, the effectiveness of the 2nd LINC+ (socially customized Leaders in Industry-University Cooperation) was verified from 2017 to 2021 through a longitudinal causal relationship analysis. As a result of the study, it was found that the startup education & startup support and capstone design & field training as industry-academia-linked education programs of the 2nd LINC+ (socially customized Leaders in Industry-University Cooperation) did not affect the employment rate. As a result of the longitudinal causal relationship analysis, it was reconfirmed that universities in metropolitan areas still have higher employment rates than universities in non-metropolitan areas due to existing university factors, and that private universities have higher employment rates than national universities. Among employment and entrepreneurship competency strengthening programs, the number of people who complete entrepreneurship courses, the number of people who complete capstone design, the amount of capstone design payment, and the number of dedicated faculty members partially affect the employment rate by year, while field training has no effect at all by year. It was confirmed that long-term exposure to the entrepreneurship capacity building program did not affect the employment rate. Therefore, it was reconfirmed that in order to improve the employment rate of universities, the limitations of non-metropolitan areas and national and public universities must be overcome. To overcome this, as a program to strengthen employment and entrepreneurship capabilities, it is important to strengthen entrepreneurship through participation in entrepreneurship lectures and actively introduce and be confident in the capstone design program that strengthens the concept of PBL (Problem Based Learning), and the field training program improves the employment rate. In order for actually field training affect of the employment rate, it is necessary to proceed with a substantial program through reorganization of the overall academic system and organization.

• Applied Biological Chemistry
• /
• v.17 no.1
• /
• pp.1-30
• /
• 1974

Present study was undertaken to elucidate the relationship between uptake of nutrients and photosynthetic activities, and the translocation of several mineral nutrients in rice plants which were grown under different cultural conditions, utilizing radioactive tracer technique. Particular emphasis was placed on the analysis of patterns of nutrient uptake, the relationship between nutritional conditions and yield components. For this, rice plants grown on either low or high yielding fields at different growth stage were subjected to this study. The results are summarized as follows; 1. Varietal difference was observed in the uptake of potassium and phosphorus. Kusabue and Jinheung had good capacity but Paldal had rather poor capacity for the uptake of the both nutrients. 2. For rice plants, a high positive correlation was found between the oxidation of alpha plaus-naphthylamine by root and uptake of phosphorus. 3. Carbon assimilation rate repended on rice varieties. It was high in Noindo, Gutaenajuok #3 Suweon #82 and Jinheung but low in Taegujo, Kwanok, Yugu #132 etc. 4. Heavy application of nitrogen increased carbon assimilation in rice plants but this also depressed translocation of certain carbohydrates to ears. 5. Carbon assimilation wan greatly hampered in rice plants deficient in magnesium, phosphorus or potassium. 6. Total dry matter after ear formation stage, was much higher in rice plants grown in high yielding fields than those grown in low yielding fields. 7. Leaf area index(LAI) reached maximum at heading stage and decreased thereafter in high yielding fields. But in low yielding fields, it reached maximum before heading and sharply decreased thereafter due to early senescence of lower leaves. 8. In general, light transmission ratio (LTR) of leaves was higher in the early growth stage and lower in later stages. Higher ratio of LTR to leaf area index, was found in the rice grown in high yielding fields than those in low yielding fields. 9. Net photosynthetic activity decreased with the increase in leaf area index but was higher in high yielding fields than in low yielding fields. 10. After the ear formation stage, nitrogen, potassium and silicon as weil as $K_2O/N$ in straw were higher in high yielding fields than those in low yielding fields. 11. Nitrogen, phosphorus, potassium and magnesium taken up by rice plants in low yielding fields before heading stage were readily translocated to ears than those in high yielding fields. This suggests greater redistribution of nutrients in straw occurs due to lower uptake, in later growth stages, by rice plants grown in low yielding fields and hence results in early senescence due to nutrient deprivation. 12. In the high yielding fields nitrogen uptake by rice was slow but continuous throughout the life of the plants resulting in a large uptake even after heading. But, in low yielding fields the uptake was fast before heading and slow after heading. 13. A high positive correlation was found between the contents of nitrogen and potassium in the straw at heading stage and grain yield. Positive correlation was also found to hold between the contents of potassium, silicon, $K_2O/N$, $SiO_2/N$ in the straw at harvesting stage, and grain yield. 14. Carbon assimilation was greately hampered in rice plants deficient in magensium, phosphorus or potassium. 15. Uptake of nitrogen, phosphorus, potassium, silicon and manganese by rice was considerably higher in high yielding fields and reached maximum at ear formation stage. 16. In rice, a high positive correlation was discovered between total uptake of nitrogen, phosphorus, potassium, calcium, magnesium, silicon, manganese at harvesting stage and grain yield. 17. In rice, a high positive correlation was found between the total uptake of nitrogen, phosphorus, potassium, calcium, magnesium, silicon at harvesting stage, and number of spikelets per $3.3\;m^2$. In addition, a correlation was found between the total uptake of nitrogen and potassium and number of panicles per hill.

• Journal of Bio-Environment Control
• /
• v.5 no.2
• /
• pp.215-235
• /
• 1996

The thermal analysis by mathematical model simulation makes it possible to reasonably predict heating and/or cooling requirements of certain greenhouses located under various geographical and climatic environment. It is another advantages of model simulation technique to be able to make it possible to select appropriate heating system, to set up energy utilization strategy, to schedule seasonal crop pattern, as well as to determine new greenhouse ranges. In this study, the control pattern for greenhouse microclimate is categorized as cooling and heating. Dynamic model was adopted to simulate heating requirements and/or energy conservation effectiveness such as energy saving by night-time thermal curtain, estimation of Heating Degree-Hours(HDH), long time prediction of greenhouse thermal behavior, etc. On the other hand, the cooling effects of ventilation, shading, and pad ||||&|||| fan system were partly analyzed by static model. By the experimental work with small size model greenhouse of 1.2m$\times$2.4m, it was found that cooling the greenhouse by spraying cold water directly on greenhouse cover surface or by recirculating cold water through heat exchangers would be effective in greenhouse summer cooling. The mathematical model developed for greenhouse model simulation is highly applicable because it can reflects various climatic factors like temperature, humidity, beam and diffuse solar radiation, wind velocity, etc. This model was closely verified by various weather data obtained through long period greenhouse experiment. Most of the materials relating with greenhouse heating or cooling components were obtained from model greenhouse simulated mathematically by using typical year(1987) data of Jinju Gyeongnam. But some of the materials relating with greenhouse cooling was obtained by performing model experiments which include analyzing cooling effect of water sprayed directly on greenhouse roof surface. The results are summarized as follows : 1. The heating requirements of model greenhouse were highly related with the minimum temperature set for given greenhouse. The setting temperature at night-time is much more influential on heating energy requirement than that at day-time. Therefore It is highly recommended that night- time setting temperature should be carefully determined and controlled. 2. The HDH data obtained by conventional method were estimated on the basis of considerably long term average weather temperature together with the standard base temperature(usually 18.3$^{\circ}C$). This kind of data can merely be used as a relative comparison criteria about heating load, but is not applicable in the calculation of greenhouse heating requirements because of the limited consideration of climatic factors and inappropriate base temperature. By comparing the HDM data with the results of simulation, it is found that the heating system design by HDH data will probably overshoot the actual heating requirement. 3. The energy saving effect of night-time thermal curtain as well as estimated heating requirement is found to be sensitively related with weather condition: Thermal curtain adopted for simulation showed high effectiveness in energy saving which amounts to more than 50% of annual heating requirement. 4. The ventilation performances doting warm seasons are mainly influenced by air exchange rate even though there are some variations depending on greenhouse structural difference, weather and cropping conditions. For air exchanges above 1 volume per minute, the reduction rate of temperature rise on both types of considered greenhouse becomes modest with the additional increase of ventilation capacity. Therefore the desirable ventilation capacity is assumed to be 1 air change per minute, which is the recommended ventilation rate in common greenhouse. 5. In glass covered greenhouse with full production, under clear weather of 50% RH, and continuous 1 air change per minute, the temperature drop in 50% shaded greenhouse and pad ＆ fan systemed greenhouse is 2.6$^{\circ}C$ and.6.1$^{\circ}C$ respectively. The temperature in control greenhouse under continuous air change at this time was 36.6$^{\circ}C$ which was 5.3$^{\circ}C$ above ambient temperature. As a result the greenhouse temperature can be maintained 3$^{\circ}C$ below ambient temperature. But when RH is 80%, it was impossible to drop greenhouse temperature below ambient temperature because possible temperature reduction by pad ||||&|||| fan system at this time is not more than 2.4$^{\circ}C$. 6. During 3 months of hot summer season if the greenhouse is assumed to be cooled only when greenhouse temperature rise above 27$^{\circ}C$, the relationship between RH of ambient air and greenhouse temperature drop($\Delta$T) was formulated as follows : $\Delta$T= -0.077RH＋7.7 7. Time dependent cooling effects performed by operation of each or combination of ventilation, 50% shading, pad ＆ fan of 80% efficiency, were continuously predicted for one typical summer day long. When the greenhouse was cooled only by 1 air change per minute, greenhouse air temperature was 5$^{\circ}C$ above outdoor temperature. Either method alone can not drop greenhouse air temperature below outdoor temperature even under the fully cropped situations. But when both systems were operated together, greenhouse air temperature can be controlled to about 2.0-2.3$^{\circ}C$ below ambient temperature. 8. When the cool water of 6.5-8.5$^{\circ}C$ was sprayed on greenhouse roof surface with the water flow rate of 1.3 liter/min per unit greenhouse floor area, greenhouse air temperature could be dropped down to 16.5-18.$0^{\circ}C$, whlch is about 1$0^{\circ}C$ below the ambient temperature of 26.5-28.$0^{\circ}C$ at that time. The most important thing in cooling greenhouse air effectively with water spray may be obtaining plenty of cool water source like ground water itself or cold water produced by heat-pump. Future work is focused on not only analyzing the feasibility of heat pump operation but also finding the relationships between greenhouse air temperature(T$_{g}$ ), spraying water temperature(T$_{w}$ ), water flow rate(Q), and ambient temperature(T$_{o}$).

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.1 no.1
• /
• pp.45-55
• /
• 1998

Purpose: To make objective standards of small intestinal mucosal changes in cow's milk-sensitive enteropathy (CMSE) we analyzed histological changes of endoscopic duodenal mucosa biopsy specimens from normal children and patients of CMSE. Methods: We review the medical records of patients who had been admitted and diagnosed as CMSE by means of gastrofiberscopic duodenal mucosal biopsy following cow's milk challenge and withdrawal. Thirteen babies with CMSE, ranging from 14 days to 56 days of age, were studied. Five non-CMSE patients were used as control, ranging from 22 days to 72 days of age. The morphometric parameters under study were villous height, crypt zone depth, ratio of villous height to crypt zone depth, total mucosal thickness and length of surface epithelium by using H & E stained specimens under the drawing apparatus attached microscope. In addition, the numbers of lymphocytes in the epithelium and eosinophil cells in the lamina propria and epithelium were measured. Results: In the duodenal mucosal biopsy specimens in CMSE we found partial and subtotal villous atrophy with an increased number of interepithelial lymphocytes. The mean villous height($135{\pm}59\;{\mu}m$), ratio of villous height to crypt zone depth ($0.46{\pm}0.28$), total mucosal thickness ($499{\pm}56\;{\mu}m$), length of surface epithelium of small intestinal mucosa ($889{\pm}231\;{\mu}m$) in CMSE was significantly decreased compared with the control (p<0.05). The mean crypt zone depth ($311{\pm}65\;{\mu}m$) was significantly greater than the control ($188{\pm}24\;{\mu}m$)(p<0.05). Infiltration of interepithelial lymphocytes ($34.1{\pm}10.5$) were significantly greater than the control ($13.6{\pm}3.6$)(p<0.05). The number of eosinophil cells in both lamina propria and epithelium was no significant differences between groups (p>0.05). The small intestinal mucosa in treated CMSE showed much improved enteropathy of villous height, crypt zone depth, interepithelial lymphocytes compared with the control as well as untreated CMSE. Conclusion: Quantitation of mucosal dimensions confirmed the presence of CMSE. It seems to be a limitation in the capacity of crypt cells to compensate for the loss of villous epithelium in CMSE. Specimens obtained by gastrofiberscopic duodenal mucosal biopsy were suitable for morphometric diagnosis of CMSE. Improvement of CMSE also can be confirmed histologically after the therapy of protein hydrolysate.

• Journal of radiological science and technology
• /
• v.6 no.1
• /
• pp.131-181
• /
• 1983

After the investigation on, and the analysis of, the educational system for medical technicians and the present educational situation for medical technologies in this country, the following conclusions were drawn. 1. As of March 1983 the current academic system for education in medical technologies included the regular 4-year college courses and those of the 2-year professional junior college courses. But except in the cases on clinical pathology and physical therapy, there were no college-level departments. Particularly, no educational institutions, at whatever level, had a department for working therapies. 2. The total number of credits needed for graduation from a department of medical technologies was 150 points at a regular 4-year college and 85 to 96 points at a 2-year professional college. The obligatory minimum number of credits for a student at a professional college was set at 80 points and above. 3. As for the number of the educational institutions for medical technologies in this country, there were one regular college and 14 professional colleges, a total of 15 institutions. As many as 14 colleges had departments of clinical pathology, 12 had departments of Radiotechnology, 11 had departments of physical therapy, 12 had departments of dental technology, and eight had departments of dental hygiene. 4. The total capacity of the professional colleges in admitting new enrollment each year were 1,920 for clinical pathology, 1,552 for radiology, 1,012 for physical therapy, 1,334 for dental technologies, 828 for dental hygiene, an aggregate of 6,646 for all of the professional college departments. 5. The total number of graduates from the 12 professional colleges by department during the period of 1965-83 were 7,595 for clindical pathology, 4,768 for radiology, 2,821 for physical therapy, 3,000 for dental technologies, and 1,787 for dental hygiene, totalling 19,971 for all departments in the professional colleges. 6. In the state examination for licensed medical technicians, 12,446 have passed from among the total of 26,609 participants, representing a 45% passing ratio. By departments the ratios showed 44% for clinical pathology, 39.7% for radiology, 51.2% for physical therapy, 42.5% for dental technology, 72.5% for dental hygiene and 73.1% for working therapy. 7. As for the degree of satisfaction shown by the people in this field, 52.2 percent of the teaching staffs who responed to the questionaires said they were satisfied with their present profession, while the great majority of medical technicians(66%) replied that they were indifferent to the problem. 8. The degree of satisfaction shown by the students on their enrollment in this particular academic field was generally in the framework of indifference(43.7%), but mere students(36.5%) were satisfied with their choice than those were not satisfied(14.4%) 9. As for the student's opinions on the lectures and practicing hours, a good many students replied that, among such courses as general science and humanities courses the basic medical course, the major course and practicing hours, the hours provided for the general courses(47.1%) and practicing(47.6%) were insufficient. 10. When asked about the contents of their major courses, comparatively few students (23.6%) replied that the courses were too difficult, while a convincing majority(58.5%) said they were neither difficult nor easy. As for the appropriateness of the number of the present teaching staffs, a great majority(71.0%) of the students replied that the level of the teaching personnel in each particular field was insufficient. 11. Among the students who responded to the poll, good part of them(49.5%) wanted mandatory clinical practicing hours, and the the majority of them(64.6%) held the view that the experimental and practicing facilities of their schools were insufficient. 12. On the necessity of the attached hospitals, 71.1% of the teaching staffs and 58.0% of the medical technicians had the opinion that this kind of facility was indispensable. 13. As for the qualifications for applicants to the state examination in the licensing system for medical technicians, 52.2% of the teacher's and 36% of the medical technicians replied that the present system granting the qualifications according to the apprenticeship period should be abolished. 14. On the necessity of improving the present system for education in medical technologies, an overwhelming majority(94.4% of the :caching staffs, 92.0% of the medical technicians and 91.9% of students) of these polled replied that the present system should be changed for the better. 15. On the method of changes for the present educational system, a great majority(89.4% of the teaching staffs, 80.4% of the medical technicians and 90.1% of the students) said that the system must be changed so that it fits into the reality of the present day. 16. As for the present 2-year program for the professional colleges, 61.6% of the teachers, 72.0% of the medical technicians and 38.8% of the students expressed the hope that the academic period would be extended to four regular years, hemming a full-fledged collegelevels program. 17. On the life-long eductional system for medical technicians, there was a considerable number of people who expressed the hope that an open university system(38.9% of the teaching staffs, 36.0% of the medical technicians) and a graduate school system would be set up. 18. As for the future prospects for medical technicians as professionals, the optimists ana pessimists were almost equally divided, and 41.1% of the teaching staffs 36.0% of. the technicians and 50.5% of the students expressed an intermediate position on this issue.

• The Korean Journal of Quaternary Research
• /
• v.20 no.1 s.26
• /
• pp.51-66
• /
• 2006

The climate of the last glacial maximum (LGM) in northeast Asia is simulated with an atmospheric general circulation model of NCAR CCM3 at spectral truncation of T170, corresponding to a grid cell size of roughly 75 km. Modern climate is simulated by a prescribed sea surface temperature and sea ice provided from NCAR, and contemporary atmospheric CO2, topography, and orbital parameters, while LGM simulation was forced with the reconstructed CLIMAP sea surface temperatures, sea ice distribution, ice sheet topography, reduced $CO_2$, and orbital parameters. Under LGM conditions, surface temperature is markedly reduced in winter by more than $18^{\circ}C$ in the Korean west sea and continental margin of the Korean east sea, where the ocean exposed to land in the LGM, whereas in these areas surface temperature is warmer than present in summer by up to $2^{\circ}C$. This is due to the difference in heat capacity between ocean and land. Overall, in the LGM surface is cooled by $4{\sim}6^{\circ}C$ in northeast Asia land and by $7.1^{\circ}C$ in the entire area. An analysis of surface heat fluxes show that the surface cooling is due to the increase in outgoing longwave radiation associated with the reduced $CO_2$ concentration. The reduction in surface temperature leads to a weakening of the hydrological cycle. In winter, precipitation decreases largely in the southeastern part of Asia by about $1{\sim}4\;mm/day$, while in summer a larger reduction is found over China. Overall, annual-mean precipitation decreases by about 50% in the LGM. In northeast Asia, evaporation is also overall reduced in the LGM, but the reduction of precipitation is larger, eventually leading to a drier climate. The drier LGM climate simulated in this study is consistent with proxy evidence compiled in other areas. Overall, the high-resolution model captures the climate features reasonably well under global domain.

• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.5
• /
• pp.418-428
• /
• 2007

Physical and chemical properties of the aggregate by-products including sludge and crushed dust samples collected from the 21 private companies throughout the country were analyzed to evaluate possible usage of the by-products as artificial soil materials for plantation. The pH of the materials ranged from 8.0 to 11.0. The organic matter content was $2.85g\;kg^{-1}$, and the total nitrogen content and available phosphate content were low as 0.7 percents and $12.98mg\;kg^{-1}$, respectively. Exchangeable $Ca^{2+}$, $Mg^{2+}$, $K^+$, and $Na^+$ were 2.29, 0.47, 0.02 and $0.05cmol\;kg^{-1}$, respectively. Heavy metal contents were lower than the limits regulated by environmental law of Korea. Textural analysis showed that most of the materials were silt loam with low water holding capacity ranged from 0.67 to 7.41 percents, and with low hydraulic conductivity ranged from 0.4 to $2.8m\;s^{-1}$. Mineralogical analysis showed that the aggregate by product materials were mostly composed of silicate, alumina and ferric oxides except calcium oxide dominant materials derived from limestones. The primary minerals were quartz, feldspars and dolomites derived from granite and granitic gneiss materials. Some samples derived from limestone material showed calcite and graphite together with the above minerals. According to the result, it can be concluded that the materials could be used as the artificial soil material for plantation after proper improvement of the physico-chemical properties and fertility.

• Korean Journal of Soil Science and Fertilizer
• /
• v.25 no.3
• /
• pp.202-212
• /
• 1992

This study reports on the genesis and mineralogical characteristics of the clay minerals in the soils derived from the five major parent rocks of granite, granite-gneiss, limestone, shale, and basalt in Korea. The investigation on the mineralogical aspects of primary and secondary minerals of the rocks and coarse fractions in the soils have been already reported. In this report, the identification of clay minerals in the soil clay fractions was done through the analyses of chemical, X-ray diffraction, and thermal methods. The studies showed clearly that much of the clay minerals was evolved by the weathering of primary minerals and some were further developed by the transformation of secondary minerals. Cation exchange capacity(CEC) of the clay fractions increased with higher amotunts of vermiculite, chlorite, and illite, however, decreased with higher hydroxy octahedral sheet within the interlayer spaces of vermiculite even if dominant clay with vermiculite. Feldspars in the granite and granite-gneiss might be completely transformed to kaolin mineral, Illite, chlolrite, and vermiculite formed by the alteration of micas, amphibole, augite, and primary chlorile seem to be subsequently transformed to the mixed layer minerals such as illite/vermiculite, illite/chlorite, and chlorite/vermiculite. These weathering products may be ultimately transformed into kaolin minerals. The smectite minerals in the clay fractions of the soils developed on the limestone are considerably present and they seem to be formed directly by the precipitation from high Mg solution and/or by the transformation of vermiculite from micas and chlorite in the parent materials. Abundant presence of illite in the soil clays developed on the shale is considered to have inherited from the fine particles and more resistant hydrous muscovite. The weathering sequences of the hydrous muscovite were as follows according to the degree of soil development ; hydrous muscovite ${\rightarrow}$ illite/vermiculite mixed layer(Inceptisols, Daegu series) and hydrous muscovite ${\rightarrow}$ illite/vermiculite mixed layer ${\rightarrow}$ vermiculite ${\rightarrow}$ kaolin mineral(Alfisols, Buyeo series). The plagioclase in the basalt might be mostly weathered to kaolin minerais. The augite in the basalt is likely to be transformed through progressive stage of weathering, augite ${\rightarrow}$ chlorite ${\rightarrow}$ chlorote/vermiculite mixed layer ${\rightarrow}$ vermiculite ${\rightarrow}$ kaolin. Another weathering sequence of augite could be expected, augite ${\rightarrow}$ chlorite ${\rightarrow}$ illite by the presence of illite and illite/vermiculite mixed layer in the clay fractions. Vermiculite and gibbsite were quantified from thermogravimetry(TG) and kaolin minerals, from both TG and differerential thermal analysis (DTA). Vermiculite in Jangseong series from the limestone was the dominant clay mineral of 21.7 percent and had a range in the order of 9.2 percent in Buyeo series to 5.4 percent in Daegu series from the shale. The rest soils ranged from 8.8 to 28.3 percent. Kaolin minerals were the dominant clay mineral of 32.7 percent in Asan series from the granite-gneiss and Gueom series of 32.0 percent from the basalt. The soils from the limestone ranged from 9.4 to 14.9 percent. The rest soils ranged from 8.9 to 28.6 percent. Gibbsite were 3.9 and 2.3 percent for Weoljeong and Chahang series from the granite, respectively. In Asan and Cheongsan series from the giranite-gneiss were 1.4 and 4.5 percent, respectively, and 3.6 percent in Jangpa series from the basalt.