• Nuclear Engineering and Technology
• /
• v.32 no.4
• /
• pp.395-409
• /
• 2000

Parametric studies were performed to assess the sensitivity in determining the maximum in-vessel heat removal capability from the core material relocated into the lower plenum of the reactor pressure vessel (RPV）during a core melt accident. A fraction of the sensible heat can be removed during the molten jet delivery from the core to the lower plenum, while the remaining sensible heat and the decay heat can be transported by rather complex mechanisms of the counter-current flow limitation (CCFL) and the critical heat flux (CHF）through the irregular, hemispherical gap that may be formed between the freezing oxidic debris and the overheated metallic RPV wall. It is shown that under the pressurized condition of 10MPa with the sensible heat loss being 50% for the reactors considered in this study, i.e. TMI-2, KORI-2 like, YGN-3&4 like and KNGR like reactors, the heat removal through the gap cooling mechanism was capable of ensuring the RPV integrity as much as 30% to 40% of the total core mass was relocated to the lower plenum. The sensitivity analysis indicated that the cooling rate of debris coupled with the sensible heat loss was a significant factor The newly proposed heat removal capability map (HRCM) clearly displays the critical factors in estimating the maximum heat removal from the debris in the lower plenum. This map can be used as a first-principle engineering tool to assess the RPV thermal integrity during a core melt accident. The predictive model also provided ith a reasonable explanation for the non-failure of the test vessel in the LAVA experiments performed at the Korea Atomic Energy Research Institute (KAERI), which apparently indicated a cooling effect of water ingression through the debris-to-vessel gap and the intra-debris pores and crevices.

• Journal of Digital Convergence
• /
• v.16 no.1
• /
• pp.13-20
• /
• 2018

The regional differences between urban and rural areas make many diverse differences. There are various differences between urban and rural areas such as economic gap and cultural gap. There is also a difference between urban and rural areas in accessing and utilizing information. The purpose of this study is to clarify the relationship between the information gap and the income gap among farmers and fishermen groups, where information gap is considered to be more serious than other groups. In other words, we tried to examine whether the information gap between farmers and peasants affects the income gap. The purpose of this study is to analyze the relationship between informatization level and income of farmers based on the information gap index and survey results conducted every year by the government. The results show that there is a statistically significant positive relationship between the informatization level of farmers and household income. In addition, the trend of the regression coefficient is positive, suggesting that the government needs various informatization policies to increase the informatization level of farmers.

• Journal of Aerospace System Engineering
• /
• v.14 no.6
• /
• pp.10-17
• /
• 2020

The Korean medical evacuation helicopter was developed based on the Korean Utility Helicopter (hereafter referred to as 'Surion'). It uses an auxiliary power unit and engine for heating during winter operation. The helicopter maintains the internal temperature of the aircraft using its bleed air to satisfy its operational capability. However, due to the air inflow through the gap between the aircraft skin and door, additional heating for operating the portable medical equipment and preventing hypothermia in evacuated patients is required. Accordingly, an electric auxiliary heater was developed for additional heating during winter operation, and environmental, durability, and performance tests were conducted per MIL-STD-810G and MIL-STD-461F. The auxiliary heater was verified per the tailored airworthiness certification criteria.

• Applied Chemistry for Engineering
• /
• v.30 no.6
• /
• pp.673-680
• /
• 2019

GAP or GAP-co-BO based energetic thermoplastic elastomers (ETPEs) were synthesized by changing the hard segment content percent in the range of 30~45% by 5% difference. Thermal and mechanical properties of GAP-co-BO based ETPEs were compared to those of GAP based ETPEs. FT-IR results showed that the capability of forming hydrogen bond increases with increasing the hard segment content in GAP/GAP-co-BO based ETPE, and also the GAP-co-BO based ETPEs are stronger than GAP based ETPEs in the hydrogen bond formation. DSC and DMA results showed that the glass transition temperature (T_g) of GAP based ETPEs increased with the increment of the hard segment content, while the T_g of GAP-co-BO based ETPEs was maintained even the hard segment content increased. The storage modulus at room temperature of the GAP-co-BO based ETPEs was higher than that of the GAP based ETPEs. This was due to the strong phase separation behavior of the hard and soft segment of GAP-co-BO based ETPEs, which further resulted in the stronger breaking strength and lower tensile elongation at break point for GAP-co-BO based ETPE than the GAP based one.

• 한국생물공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.753-757
• /
• 2003

Escherichia coli and Saccharomyces cerevisiae have been used as host for production of recombinant proteins. It is known that S. cerevisiae has advantages such as good folding and secretion capability, and safety as host over E. coli. But S. cerevisiae has shortcomings of low expression level which is just 20% of that of E. coli. To solve this problem, directed evolution method was tried to enhance the GAP promoter strength of S. cerevisiae in this study. As result, modified GAP promoter that has increased expression level of about 360% compared to that of wild type was selected.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.625-628
• /
• 2009

In the bistable chiral splay nematic (BCSN) mode, the splay and ${\pi}$ twist states are used for the two stable states. The switching property is strongly dependent on the amplitude of the electric field. In this paper, we investigated the gray scale capability of BCSN liquid crystal display (LCD) by the gradual horizontal electric field caused the interdigital electrode of by the inequality gap. We demonstrate the gray scale of the BCSN LCD during transition process under the horizontal electric field.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.9
• /
• pp.77-86
• /
• 2018

Demand for construction technology is expected to change due to changes in domestic and foreign construction markets and the fourth industrial revolution. In particular, demand for project management strategy and project management capability is even more increasing rather than existing production technology capability. However, the current re-education program for engineers and technicians in construction industry is not matching the need of improving capacity required to reflect the demand of construction technology from construction industry. Therefore, in this study, as a part of efforts in innovating the current global construction talent re-education system to cope with the change in the construction industry, we analyzed the difference between the demand of construction technology and the present condition of construction re-education program. In order to investigate the current status of re-education of construction, questionnaires were prepared to gather opinions from construction engineers who attended construction re-education program and also from industrial partners that are jointly doing business. This study can be an example to improve the construction re-education program as a system for substantially reinforcing the competence of engineers rather than those programs that are merely verifying and/or extending engineers' certification.

• Journal of electromagnetic engineering and science
• /
• v.12 no.1
• /
• pp.101-106
• /
• 2012

In this study, we investigated the effect of groove pattern and gap-fill with lossy materials at 15 GHz frequency of Ku-band. We used Epoxy/MWCNT composite materials as gap-fill materials. Although epoxy does not have an absorbance capability, epoxy added conductive fillers, which are multi-walled carbon nanotubes (MWCNT), can function as radar absorbing material. Specimens were fabricated with different MWCNT mass fractions (0, 0.5, 1.0, 2.0 wt%) and their permittivity in the Ku-band was measured using the waveguide technique. We investigated the effect of gap-fill on monostatic RCS by calculating RCS with and without gap-fill. For arbitrarily chosen thickness and experimentally obtained relative permittivity, we chose the relative permittivity of MWCNT at 2 wt% (${\varepsilon}_r$=8.8-j2.4), which was the lowest reflection coefficient for given thickness of 3.3 mm at V-pol. and $80^{\circ}$ incident angle. We also checked the monostatic RCS and the field intensity inside the groove channel. In the case of H-pol, gap-fill was not affected by the monostatic RCS and magnitude was similar with or without gap-fill. However, in the case of V-pol, gap-fill effectively reduced the monostatic RCS. The field intensity inside the groove channel reveals that different RCS behaviors depend on the wave polarizations.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.3
• /
• pp.419-427
• /
• 2013

The catalytic converters for automobile exhaust systems are manufactured by inserting a mat-wrapped substrate into a stainless steel can. A residual pressure that is too high will initiate a fracture in the substrate. In contrast, a residual pressure that is too low will fail to hold the substrate in the acceleration or deceleration phase. Both the process capability and mat pressure on the substrate are predicted while considering the effect of the statistical variation in the dimensions of the parts. The validity of the solutions is then confirmed. A program using EXCEL combines a finite element analysis and process capability analysis in one program.

• Journal of Distribution Science
• /
• v.22 no.1
• /
• pp.37-46
• /
• 2024

Purpose: This study aims to address the overlooked micro-level aspects within Smart Manufacturing (SM) research, rectifying the misalignment in manufacturing firms' estimation of their technological adoption capabilities. Drawing upon the Social-Technical Systems (STS) theory, this paper utilises innovation capability as a mediating variable, constructing a human-centric organizational model to bridge this research gap. Research design, data and methodology: This study collected data from 233 Chinese manufacturing firms via online questionnaires. Introducing innovation capability as a mediating variable, it investigates the impact of social-technical system dimensions (work design, social subsystems, and technical subsystems) on SM adoption willingness. Smart PLS 4.0 was employed for data analysis, and Structural Equation Modelling (SEM) validated the theoretical model's assumptions. Results: In direct relationships, social subsystems, technical subsystems, and work design positively influence firms' innovation capabilities, which, in turn, positively impact SM adoption. However, innovation capability does not mediate the relationship between technical subsystems and SM adoption. Conclusions: This study focuses on the internal micro-level of organisational employees, constructing a human-centric framework that emphasises the interaction between organisations and technology. The study fills empirical gaps in Smart Manufacturing adoption, providing organisations with a means to examine the integration of employees and the organisational social-technical system.