• Journal of the Korean Institute of Navigation
• /
• v.18 no.2
• /
• pp.69-81
• /
• 1994

Studies on the ship's automatic navigation & berthing control have been continued by way of solving the ship's mathematical model, but the results of such studies have not reached to our satisfactory level due to its non-linear characteristics at low speed. In this paper, the authors propose a new berthing control system which can evaluate as closely as cap-tain's decision-making by using the FNN(Fuzzy Neural Network) controller which can simulate captain's knowledge. This berthing controller consists of the navigation subsystem FNN controller and the berthing subsystem FNN controller. The learning data are drawn from Ship Handling Simulator (NavSim NMS-90 MK Ⅲ) and represent the ship motion characteristics internally. According to learning procedure, both FNN controllers can tune membership functions and identify fuzzy control rules automatically. The verified results show the FNN controllers effective to incorporate captain's knowledge and experience of berthing.

• Korean Journal of Human Ecology
• /
• v.10 no.4
• /
• pp.379-390
• /
• 2001

The purpose of this study is to investigate the fitness according to drafting method of the block patterns for women in Korea. The major findings of this study are as follows: 1. According to comparative analysis of required measurements, two measurements of back length and bust girth are used in Proportional Drafting Method (Munhwa). In case of Compromise Drafting Methods are used across chest, across back, bust length, bust width, full length in front, across shoulder and shoulder length in addition to back length and bust girth. The type of Armstrong as a Short Measure Drafting Method uses 10 measurements for the drafting the bodice. 2. While Esmod block pattern arid Armstrong's block pattern are the lightest in full width and other widths. Rasara block pattern is the most ample. In Lee, Myung-hee's block pattern and Lee, Hyung-sook's block pattern, amounts of drooping are decided $3{\sim}4cm$, but drooping amounts of other block patterns are decided corresponding to real measurements. While cap height in Esmod and Armstrong's sleeve patterns are directly measured Armhole length of the block pattern, cap height of other sleeve patterns are used armhole depth and cap height length as well as armhole length. 3. When analyzing to indirect measurements, Esmod block pattern shows the least different between full length of block pattern and that of body form. Munhwa block pattern and Kim, Hyosook's block pattern are mostly same to body form back length. However all of the block patterns are sheller than body form length. In case of Suh, Wansuk's block pattern, across back and across chest are same size, but other block patterns show difference between across back and across chest. Most block patterns' neck width in front and bach bodice are almost same. Front neck width is generally bigger than back neck width in some cases.

• The Korean Journal of Mycology
• /
• v.11 no.4
• /
• pp.163-167
• /
• 1983

Oyster mushroom, Pleurotus ostreatus, was exposed to 0.625, 1.25, 2.5 and 5.0 ppm $SO_2$ for 15, 30, 60, 120 and 180 minutes at the tiny button stage in order to study the effect of sulfur dioxide on growth and cap discoloration of the mushroom. The cap color was changed from grey to greyish blue at low dosage of sulfur dioxide, and with the lapse of exposing time and rasing sulfur dioxide concentration up, the color was changed to light brown and dark brown. The cap dicoloration was begun by the exposure of sulfur dioxide to 0.625 ppm for 120 minutes, to 1.25 ppm for 30 minutes and to 2.5 ppm for 15 minutes. By the exposure of sulfur dioxide to 1.25 ppm for 120 minutes, to 2.5 ppm for 30 minutes, its growth was inhibited, but the fruit body was died by the exposure of the gas to 2.5 ppm for 180 minutes and to 5.0 ppm for 60 minutes. Sulfur dioxide inhibited conspicuously the development of basidia and basidiospores of the mushroom and 20 to 25 percent of basidiospores formed were abnormal. Ethylene production by mushroom exposed to sulfur dioxide was not recognized.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.433-441
• /
• 2004

국내 발파 현장에서 사용되고 있는 폭약류에 강력한 폭굉력을 충분하게 발휘하기 위해서는 뇌관(Blasting cap, Detonator)의 역할이 중요하다. 그리고 이 뇌관의 정밀성에 따라 발파 효율의 차이가 있게된다. 초기의 도화선 및 공업뇌관에서 시작하여 현재 정밀성 면에서는 MS(Milli Second)뇌관의 경우 20ms또는 25ms의 정밀한 시차로 순차적으로 기폭함으로써 발파효과의 극대화와 소음 및 진동제어에 큰 효과를 이루었으나, 최근 개발된 진자뇌관의 경우 자체 IC회로를 내징하여 $1{\sim}2ms$의 초정밀시차(오차범위 $0.1{\sim}0.2ms$이내)의 구현이 가능해짐에 따라 이를 적절히 조합하여 설계함으로써 각종 제어발파, 파쇄도 향상, 암손상영역 저감 등의 효과에 대해 국외에서 연구가 진행되고 있는 것으로 알려지고 있다. 그러나 우리나라와 같이 도심지 발파 및 터널이나 노천 현장 근거리에 보안물건이 위치해 있어 진동제어가 절실히 필요한 상황에서 진동제어에 효과가 있는 것으로 알려진 전자뇌관에 대한 연구가 이루어지고 있지 않은 상황에서 본 연구는 앞으로 이루어질 전사뇌관에 대한 수많은 연구에 기초자료를 제공하고자 실시하였다. 본 연구에서는 이를 위해 국내에서 최초로 2003년 9월 23일 강원도 양구 지역읜 00터널에 전자뇌관을 이용한 시험발파를 실시하였고, 발파에 의한 진동 등을 조사하여 그 효율성을 검토하였다. 이를 위해 전자뇌관의 특성과 장점을 최대한 살리기 위하여 각공을 발파하는 방식, 즉 1지발에 1공을 발파하는 방식을 채택하고 비전기 뇌관과 전자뇌관으로 설계를 하여 각각의 발파효율을 비교하여 보았다. 그 결과 발파신동의 경우 비전기뇌관을 이용하여 1공씩을 1지발로 발파를 한 경우에는 18${\sim}$56%의 진동저감 효과가 있었고, 번 설계에 의해 진해오딘 발파에 비하여는 최대 70% 이상의 진동저감 효과가 있는 것으로 나타났다.

• Journal of Life Science
• /
• v.27 no.2
• /
• pp.211-216
• /
• 2017

This study aims to reduce the production cost of mushrooms and therefore boost the income of mushroom producers. The addition of a 10% concentration of herb medicine refuse was adequate for promoting mycelium growth in Flammulina velutipes. A moisture content of 60% in the culture medium was adequate for promoting hyphal growth. The optimum temperature and humidity were $16^{\circ}C$ and 70%-85%, respectively. The average yield of Flammulina velutipes fruting body per 1,100 ml bottle was 275-282 g, which is similar to that of the control. The outbreak of diseases such as mildew and bacterial blotch in mushroom was never observed in the bottle treated with herb medicine refuse. Fewer deformed and second-class quality mushrooms were observed than in the control group. Deviation reduced, and mushroom growth was observed to be significantly uniform. The winter mushroom had a white fruiting body with a hemispherical shape. The diameter of the mushroom cap was 9.2-9.3 mm, stipe length was 12.7-12.8 cm, and thickness was 3.3-3.4 mm; these were almost the same as those in the control group. The partial hardness of winter mushrooms in both the experimental and the control groups showed that the stipe ($54.6-57.3g/cm^2$) is a little harder than the mushroom cap ($46.8-47.6g/cm^2$). The calories and nutrients per 100 g of mushrooms in the control and samples were similar to each other.

• Journal of Environmental Health Sciences
• /
• v.33 no.3
• /
• pp.217-226
• /
• 2007

The purpose of this study is to estimate the emission factor of $non-CO_2$ global warming gases such as $N_2O$ and $CH_4$ by measuring concentrations from stacks of waste incinerators and cement production plants. Based on the established monitoring methods, $N_2O$ concentration measured from stacks in incinerator were between 0.62 and $40.60\;ppm_v$ (ave. $11.50\;ppm_v$). The concentration of $N_2O$ was dependent on the incinerator types. However, the concentrations of $CH_4$ gas were between 2.65 and $5.68\;ppm_v$ (ave. $4.22\;ppm_v$), and did not show the dependency on the incinerator types. In the cement production plant, the concentration ranges of $N_2O$ from the stack were from 6.90 to $10.80\;ppm_v$ (ave. $8.60\;ppm_v$), and $CH_4$ were between 1.80 and $2.20\;ppm_v$ (ave. $2.60\;ppm_v$). Using measured concentrations, the emission amounts of $N_2O$ and $CH_4$ from stacks per year were calculated. The results were is 4.2 ton $N_2O/yr$ in the incinerators, and 53.7 ton $N_2O/yr$ in the cement facilities. The big difference is from the flow rate of flue gas in the cement facilities compared to the incinerators. By the same reason, the $CH_4$ emission amounts in cement plant and incinerator was found to be 339 ton $CO_2/yr$ and 34.1 ton $CO_2/yr$, respectively. Finally, the emission factor of $N_2O$ in the incinerators were calculated using the measured concentration and the amount of incinerated wastes, and was $42.5\sim799.1\;g/ton$ in kiln and stoker type, $11.9\sim79.9\;g/ton$ in stoker type, 90.1 ton/g in rotary kiln type, 174.9 g/ton in fluidized bed type, and 63.8 g/ton in grate type, respectively. Also, the emission factors of $CH_4$ were found to 65.2-91.3 g/ton in kiln/stoker type, 73.9-122 g/ton in stoker type, 109.5 g/ton rotary kiln, and 26.1 g/ton in fluidized bed type. This result indicates that the emission factor in incinerators is strongly dependent on the incinerator types, and matched with result of IPCC (International Panel on Climate Change) guideline.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.13 no.3
• /
• pp.251-258
• /
• 1984

In order to improve the physical properties on moisture sorption of spray dried red ginseng extract powder (SD-RGEP), the various additives and coating agents were treated, and solubility, sedimentation rate and storage stability of RGEPs treated were investigated. For the moisture-proofing, additive itself was effective in the order casein>dextrin>starch>avicell, but RGEPs treated with additives were effective in the order cord oil+tween-40>starch>casein. But there was no significant difference between RGEP treated less than 1% additive and the moisture-proofing. The coating effect of AEA and CAP on RGEP could not be recognized for the moisture-proofing, whereas that of HPC, corn oil, lecithin and HPC+corn oil was proved to be very effective for the moisture-proofing of RGEP. Also it is required to control the initial moisture content of RGEP. The sedimentation rate of RGEP nontreated was 65.1 seconds, whereas that of RGEPs coated with 1% HPC, 1% corn oil, 1% lecithin and 1% HPC+0.5% corn oil was in the range of 96.2 to 114.3 seconds. The sedimentation rate of RGEPs coated was 1.5 to 1.8 times higher than that of RGEP nontreated, and there was significant difference between solubility and sedimentation rate. Therefore it was no matter for the keeping quality. The sorption rates of RGEPs coated with lecithin $(0.5{\sim}1.0%$), corn oil(0.8%) and cellulose acetate (0.8%) were ranged 54 to 56%, 51 to 55% and 52 to 54%, respectively, and it is found that the moisture-proofing effect of RGEPs coated was about 2 times higher than that of RGEP nontreated. From the result of storage experiment during 3 months under the maltreated condition of $48{\pm}2^{\circ}C$, 75% RH, the moisture sorption of RGEPs coated with corn oil$(0.5{\sim}1.0%$), cellulose acetate(DES, $0.5{\sim}0.8%$) and lecithin (DES, 1.0%) was not at all observed. Therefore it is considered that the circulating period of RGEPs coated with these coating agents could to give more than 3 years.

• Journal of Environmental Health Sciences
• /
• v.34 no.1
• /
• pp.86-94
• /
• 2008

Lake Shiwha, an artificial lake located near metropolitan Seoul, offers a unique water environment and has been suspected to have high levels of chemical and microbiological contaminations. Lake Shiwha was originally connected to the sea but currently has four major surface water inputs from agricultural, municipal, industrial areas and in addition an occasional inflow from the sea. The objectives of this study are to investigate the relative contribution of microbial contaminants from each of the inflowing surface waters and to identify appropriate microbial indicator organisms in this unique water environment. We measured the levels of microbial contaminations in the four inflowing surface waters. A number of microbial indicator organisms including total coliform (TC), fecal coliform (FC), E. coli, Enterococci, somatic and male-specific coliphages were analyzed. Bacterial indicator microorganisms were detected and quantified by the $Colilert^{(R)},\;Enterolert^{(R)}$ kit. Surface water (50 l) was sampled by $ViroCap^{TM}\;5"$ cartridge filters and analyzed by the single agar layer method for detecting coliphages. The concentrations of TC, FC, E. coli, and Enterococci were 1543 CFU/100 ml${\sim}1.99{\times}10^6$ CFU/100 ml, 0 CFU/100 ml${\sim}202$ CFU/100ml, 0 CFU/100 ml${\sim}1.80{\sim}10^5$ CFU/100ml, 74 CFU/100 ml${\sim}3408$ CFU/100 ml, respectively. The male-specific and somatic coliphages were detected in three different inflowing surface waters. Isolated E. coli and Enterococci strains were further analyzed by 16s rDNA amplification and subsequent phylogenetic analysis from Jungwang-chun, Ansan-chun, Banwol-chun and penstock of inflowing surface water. Our results indicated that the concentrations of different fecal indicator microorganisms might not be highly correlated with each other. Multiple microbial indicator organisms should be used for monitoring microbial contamination and microbial source tracking methods.

• Journal of Mushroom
• /
• v.7 no.4
• /
• pp.187-192
• /
• 2009

Tricholoma giganteum, belongs to Tricholomataceae of Tricholoma, is also well-known as the medicinal mushroom in Taiwan. "Backryon" was the first variety developed by intra-specific crossing in Korea. It was improved with hybridization between monokaryotic strain derived from MKACC50852 and MKACC 50853. The optimum temperature of mycelial growth and fruiting body development were $25{\sim}30^{\circ}C$ and $20{\sim}25^{\circ}C$, respectively. The color of fruitingbody was pure white and cap type was umbrella. It suggested that 'Backryon' was new commercial variety for small-sized cultivator during the summer season.

• Journal of Mushroom
• /
• v.4 no.3
• /
• pp.106-110
• /
• 2006

A new commercial strain 'Jinhwang' of Pholiota adiposa was developed by hyphal anastomosis. It was developed with crossing between monokaryotic strains derived from ASI 24001 and ASI 24004. The optimum temperature of mycelial growth was $25^{\circ}C$ and that of fruiting body development was $15{\sim}18^{\circ}C$. The color of pileus was yellowish brown and many scales and gelatinous sheath were on cap. Average number of individuals a bottle was 26 and its stipe was thick. P. adiposa can be produced by box cultivation using cotton waste.