• Journal of Soil and Groundwater Environment
• /
• v.27 no.1
• /
• pp.60-70
• /
• 2022

We evaluated the performance of in-situ capping to prevent the release of phenol, one of hazardous chemicals of concern for their impact on sediment. Sediment near the estuary of Hyeongsan River, Korea, and commercially-available sand were collected to evaluate their physical properties and phenol sorption characteristics. Biodegradation kinetics of phenol spiked into the sediment was evaluated under freshwater and estuarine salinity conditions. These experimental measurements were parameterized and used as input parameters for executing CapSim, a software predicting the performance of in-situ capping. The CapSim simulation demonstrated that capping with 50-cm sand reduced the phenol release by several orders of magnitude over 0.25- and 1-year duration for almost all simulation scenarios. The variables tested, i.e., cap thickness, pore-water movement, and biodegradation rate, showed high correlation to each other to influence the extent of phenol release from sediment to the water column. The findings and the framework employed to evaluate the performance of in-situ capping in this study can be adopted to determine whether in-situ capping is appropriate remedial approach at sediment sites impacted by hazardous chemicals due to accidental spills.

• Journal of the Korean Society of Costume
• /
• v.59 no.4
• /
• pp.26-40
• /
• 2009

The custom of the flag sticked in a military cap involves the symbolic mark. That is, it makes the procession of an army clear and makes the convenience of activity possible. This custom was uniquely practiced at several countries. At Il dynasty($1258{\sim}1411$), Timurid dynasty($1369{\sim}1508$), Mughal dynasty($1526{\sim}1858$) was succeeded this custom by based on blood relationship for $13th{\sim}16th$ century on the diachronic viewpoint. And these countries have cultural correlation by regional paradigm, namely Islamic cultural area. Meanwhile, this custom of Ming dynasty and joseon dynasty appeared in $15th{\sim}17th$ century as official system. Expecially, one of joseon dynasty maintained for a short time than other countries because of jangpyo[章標] system which was more efficient than the sticked flag. On the synchronic viewpoint, this custom was the common and necessary status quo for the efficient expansion of territory and military management.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.14 no.4
• /
• pp.419-427
• /
• 1985

The properties of lipids in cap and stalk of 'Koshin' (Shiitake, Lentinus edodes, withxpanded cap) were studied. It was also carried out that the characteristics of lipids in fresh 'Donko'(unexpanded cap) and the changes of lipids in those samples by various drying process. The total lipid (TL) content in the cap and stalk of 'Koshin' were 4.58% and 2.65% respectively. It was found that the contents of neutral lipids (NL, $46.7{\sim}48.8%$) and phospholipids (PL, $42.0{\sim}43.8%$) were high, while that of glycolipids(GL, $9.2{\sim}9.5%$) was low. The main lipid in NL was triacylglycerol (TG, $58.0{\sim}58.5%$) followed by sterolester (SE, $16.9{\sim}17.4%$), sterol (ST, $15.6{\sim}16.4%$), diacylglycerol (DG, $5.8{\sim}6.0%$) and monoacylglcerol (MG, $1.1{\sim}1.3%$). The main lipids in PL was phosphatidyl ethanolamine (PE, $58.3{\sim}6.02%$) followed by phosphatidyl choline (PC, $17.3{\sim}19.5%$), cardiolipin (CA, $12.8{\sim}14.0%$) and lyso-phophatidyl choline (LPD, $4.8{\sim}6.6%$). Fatty acid composition was significantly different among TL, NL, GL and PL contained in cap and stalk. The main fatty acids was $C_{18:2}$ followed by $C_{16:0}$ and $C_{18:1}$ acids. The TL contents in cap and stalk of fresh 'Donko' were 3.7% and 2.5%. The changes of TL contents, PoV by drying were not almost observed. AV(acid value) of TL in the sun dried samples was a little lower than those of the fresh and hot air dried samples, on the contrary NL content in TL of the former was a little higher than those of the latters. The main lipid in NL of the three samples was TG followed by SE, ST, DG, MG and free fatty acid (FFA). In the above lipids, FFA contents in NL of the sun dried sample was a little higher than those of the fresh and hot air dried samples, but TG content in NL of former was a little lower than those of the latters. The main lipid in GL of the three samples was digalactosydiglycerol (DGDG) followed by acylsterylglucoside(ASG), sterylglucoside (SG), monogalactosyldiglycerol (MGD) and cerebroside (CER). Influence of drying on these lipid content were nol almost recognized. The main lipid in PL of the three samples was PE followed by PC, CA, LPC and phosphat idyl serine (PS). In the above lipids, PE and PC contents in PL of the sun dried one were a little lower than those of the fresh and hot air dried ones. The main fatty acid in TL, NL, GL and PL of the three samples was $C_{18:2}$ followed by $C_{16:0},\;C_{18:1}$. The $C_{18:2}$ acid contents of the sun dried sample was a little lower than those of the fresh and hot air dried ones, while $C_{16:0}$ content of the former was a little higher than those of the former was a little lower than those of the latters.

• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.2
• /
• pp.158-168
• /
• 2007

The cement industry is one of the energy intensive industries such as petrochemical and steel industry. The energy efficiency of cement industry is high comparing to oversea's cement industries due to the enforcement of energy conservation policies. The purpose of this study is estimate emission factors for greenhouse gas ($CO_{2}$) in cement industry. The results of field study, quicklime contained quantity of five factories were $0.64{\sim}0.65$. Measurement emission (15,382 ton/day) is 40% higher than process emission (8,929 ton/day) on the IPCC Guidelines (1996). Add to combustion emission on the lines of IPCC Guidelines (1996) is similar to the emission of this study. The emission factor of greenhouse gas ($CO_{2}$) were as follows the emission factor between $9.01E-01{\sim}2.15E-01\;ton/ton$ for $CO_{2}$. The result of this study is higher than emission factor of IPCC (0.51) but it is similar to U.S. EPA's (0.952).

• Applied Microscopy
• /
• v.37 no.3
• /
• pp.185-198
• /
• 2007

Spermiogenesis in Japanese white-toothed shrew. Crocidura dsinezumi was investigated by transmission electron microscope. Spermiogenesis was divided into 12 phases 14 steps, based on the morphological features of the nucleus and change of organelles in cytoplasm. The nucleus of spermatids in Golgi (step $1{\sim}2$) phase were spherical; however, they were changed into oval in the cap (step $3{\sim}6$) phase. Flagellum appeared in the middle of acrosomal phase; on the other hand, slender and long spermatid head was formed in maturation phase. The head of spermatids faced the lumen in step 1 to step 6 (from Golgi to cap phase), but, in step 7 to step 14 (from acrosomal to spermiation phase), it turned its head to the basal lamina of the seminiferous epithelium. The nucleus and acrosome were elongated maximally in step 10. The condensation of chromatin started in late acrosomal (step 10) phase, and it was completely finished and homogenized in the middle of maturation (step 12) phase. Multivesicular body appeared near the acrosomal vacuole during the middle cap (step 5) phase, and a large number of them were observed near the Golgi apparatus in the late cap (step 6) phase. Considering all the results, the spermiogenesis might be useful information to analyse the differentiation of spermatogenic fells.

• Geotechnical Engineering
• /
• v.22 no.7
• /
• pp.6-16
• /
• 2006

• Journal of the Microelectronics and Packaging Society
• /
• v.15 no.4
• /
• pp.31-39
• /
• 2008

To develop the MEMS cap bonding process without cavity formation, we electroplated Cu/Sn rim structures and measured the bonding characteristics for the Cu/Sn rims of $25{\sim}400{\mu}m$ width. As the effective device-mounting area ratio decreased and the failure strength ratio increased for wider Cu/Sn rim, these two properties were estimated to be optimized for the Cu/Sn rim with 150 ${\mu}m$ width. Complete bonding was accomplished at the whole interfaces of the Cu/Sn packages with the rim widths of 25 ${\mu}m$ and 50 ${\mu}m$. However, voids were observed locally at the interfaces with the rim widths larger than 100 ${\mu}m$. Such voids were formed by local non-contact between the upper and lower rims due to the surface roughness of the electroplated Sn.

• Journal of Korean Society on Water Environment
• /
• v.23 no.5
• /
• pp.740-747
• /
• 2007

The advanced wastewater treatment plant of leather industry was selected to evaluated with its effluent water quality and statistical characteristics. Most of pollutants removal efficiencies were over 90% as well. And 95% reliability of effluent concentration were 106.8 mg/L of $COD_{mn}$, 72.04 mg/L of TN. However Effluent quality of TN exceeds the regulated limit. The range of coefficient of variation (CV) were between 0.18 and 2.49. Also, coefficient of reliability (COR) were between $0.03(BOD_5){\sim}0.63(COD_{mn})$ and 0.43 in terms of T-N, $Z_{l-a}$(Normalized Percentiles) value were 55.7 and 2.25 in terms of $BOD_5$ and T-N as shown in the following table.

• The Korean Journal of Mycology
• /
• v.37 no.1
• /
• pp.104-107
• /
• 2009

Mitrula paludosa (Geoglossaccae, Helotiales, Ascomycetes) is reported about morphological and ecological characteristics for the first time in Korea. The mushroom fruited on rotten pine leaves or fine twigs in ditches with flowing or standing water in Sogri Mountain National Park from May to June. The apothecium of M. paludosa is 20 to 50 mm tall. The cap is bright yellow to orange, cylindrical to wrinkled ovoid and $5{\sim}10\;{\times}\;10{\sim}20$ mm. The stem is whitish and cylindrical distinctly set off from the cap. The ascospore is hyaline, smooth long elliptical fusoid with round ends and $13{\sim}17\;{\times}\;1.5{\sim}2.0{\mu}m$. The ascus is unitunicate, $90{\sim}110\;{\times}\;5{\sim}6{\mu}m$, and has eight spores biseriately lined to the inoperculate apex. Paraphyses are septate filiform, $95{\sim}120\;{\times}\;1.0{\sim}1.5{\mu}m$, $7{\sim}10{\mu}m$ longer than the asci.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.11
• /
• pp.17-26
• /
• 2009

The concrete cap, which was established on the top of the micropile, usually considered as an important structural component in micropile supported foundation systems. However, relatively few studies have been made on the load sharing behavior of the capped micropile foundation systems. The primary objective of this study is to assess the load sharing behavior of the capped micropile foundation systems. Therefore, a full-scale test on an instrumented capped micropile is conducted for establishing the load-displacement responses. Nonlinear numerical method was used to quantify the load sharing behavior of the pile cap and micropile respectively. As a result, it was found that the pile cap shares about 50% load from final loading steps in the case of 2 by 1 micropile foundation systems. In the case of 2 by 2, the pile cap shares about 30% load from final loading steps. In addition, the load sharing behavior of the micropile cap becomes larger with an increase in spacing and the battered angle of micropile respectively.