• Title/Summary/Keyword: Cap Rate

검색결과 187건 처리시간 0.028초

분리수거를 위한 페트병 분리시스템의 구현 (Implementation of Plastic Bottle Classification System for Recycling)

  • 박용하;박지훈;정호영;이주상;이중엽
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2021년도 춘계학술대회
    • /
    • pp.365-368
    • /
    • 2021
  • 본 연구에서는 적외선 센서를 이용한 페트병 분리수거 시스템을 구현하였다. 제안된 시스템은 인식부, 제어부, 알람부 및 구동부로 구성된다. 인식부는 페트병을 감지해 페트병과 센서와의 거리를 측정하고 값을 추출하고 추출된 값을 표준 범위와 비교하여 값이 표준 범위를 벗어날 경우에는 제어값을 제어부에 전송하고, 특정범위를 넘어간 경우 라벨 혹은 뚜껑의 유무결과를 제어부에 전송한다. 제어부에서는 센서부로부터 전송받은 결과값에 따라서 수거함의 입구를 개방하거나 알람부를 제어하는 기능을 수행한다. 제안된 시스템 구현을 위하여 인식부는 적외선 센서로 구현하였고, 제어부는 C언어 기반의 아두이노 스케치 프로그램으로 제작하였다. 또한, 인식부와 제어부는 아날로그 신호를 이용하여 통신할 수 있게 하였다. 제안된 시스템은 정해진 알고리즘에 따라 페트병의 라벨과 뚜껑의 유무를 정확히 판단한 후 라벨 혹은 뚜껑이 부착되었을 때 수거함의 입구를 막는다. 국민 1인당 배출되는 폐기물의 양이 높고 재활용이 되지 않아 쓰레기의 대다수를 소각시키고 있는 상황에서 본 연구에서 제안한 시스템을 통하여 페트병의 재활용률을 높이기를 기대한다.

  • PDF

입원한 지역사회획득 폐렴 환자에서 요중 레지오넬라항원 검사를 통해 본 Legionella Pneumophila 감염의 비중 (The Etiological Role of Legionella Pneumophila in Patients with Community-Acquired Pneumonia in Korea)

  • 송홍석;서지현;안종호;윤병인;이승준;이명구;전만조;강민종;이재명;김동규;손지웅;박명재;현인규;정기석
    • Tuberculosis and Respiratory Diseases
    • /
    • 제50권4호
    • /
    • pp.409-414
    • /
    • 2001
  • 연구배경 : 국내의 지역사회획득 폐렴 원인균에 대한 연구가 부족하며, 특히 레지오넬라 폐렴균은 중증환자에서 중요한 원인균임을 고려할 때 이에 대한 연구가 시급하다. $NOW^{TM}$ Legionella Urinary Antigen Test는 Legionella 폐렴균의 90%를 차지하는 Legionella penumophila serogroup 1에 대해 90% 이상의 민감도를 갖는 검사법으로 이를 이용하였다. 방 법 : 1999년 7월부터 일년간 강원지역 일개 대학병원에 입원한 지역사회획득 폐렴환자를 대상으로 요즘 레지오넬라 항원 검사를 시행하였다. 결 과 : 총 54예중 요중 레지오넬라 항원이 양성으로 나온 예는 없었다. 환자의 59.3%는 중환자실에 입원한 중증의 지역사회획득 폐렴 환자였다. 결 론 : 국내에서 Legionella pneumophila에 의한 지역사회 획득 폐렴은 매우 드물 것으로 생각되어, 향후 치료지침을 만드는데 고려해야 할 요소로 생각된다.

  • PDF

Corrosion Behavior of Carbon Steel in Diluted Sulfuric Acid based on Seawater

  • Kim, Mun Su;Jeong, Jin-A
    • Corrosion Science and Technology
    • /
    • 제18권3호
    • /
    • pp.78-85
    • /
    • 2019
  • The International Maritime Organization (IMO) will administer a new 0.5% global sulfur cap on fuel content from 1 January 2020, lowering from the present 3.5% limit. Seawater $SO_x$ (sulfur oxide) scrubbing is especially spray scrubbing and a promising alternative to complying with the IMO regulation. However, the ionization of $SO_2$ (sulfur dioxide) and the $H_2SO_4$ (sulfuric acid) formed from $SO_3$ (sulfur trioxide) is proposed to accelerate corrosion of the internal seawater pipe. Apparently, the corrosion of the scrubber seawater piping system occurs in a severe and frequent manner. Hence, in this study, electrochemical measurement and weight loss of carbon steel (used as seawater pipe in most of the ships) in diluted sulfuric acid solution were investigated to determine corrosion rate, corrosion current density, corrosion potential, electrochemical behavior, and impressed-current density. Accordingly, the corrosion rate of carbon steel sheet in various diluted sulfuric acid solutions was observed to be greater than that in natural seawater, thus suggesting the fundamental data to deal with corrosion problems in scrubber seawater pipe.

영상기기의 EMC Debugging 기술 (EMC Debugging Technique for Image Equipments)

  • 송민종;김진사
    • 한국전기전자재료학회논문지
    • /
    • 제35권2호
    • /
    • pp.143-148
    • /
    • 2022
  • For the purpose of treating health checkups and recovery of patients in a super-aged society, hospitals use devices designed with a reduction circuit of electromagnetic waves associated with the specific absorption rate of electromagnetic waves absorbed by the human body. In this paper, we proposed a filter improvement design method capable of reducing electromagnetic waves. As a result of confirming the validity of the proposed technique through simulation and experimental results, the following result values were obtained. Applying the common-mode (CM) inductor 4 mH to a calibration circuit, noise decreased in a multiband spectrum. Using the differential mode(DM) inductor 40 µH element in the primary calibration circuit, the noise decreased by 15 dB or more in the 3 MHz band spectrum. Also, applying the Admittance Capacitance (Y-Cap) 10 nF element in the secondary calibration circuit resulted in the decrease by more than 30 dB in the band spectrum before 2 MHz. After using a common-mode inductor 4 mH element in the tertiary calibration circuit, it decreased by more than 15 dB in the band spectrum after 2 MHz.

FTTC/VDSL 가입자 전송기술

  • 임기홍;김기호;심창섭;임종대
    • 정보와 통신
    • /
    • 제15권7호
    • /
    • pp.169-179
    • /
    • 1998
  • 본 논문에서는 현재 연구 개발되고 있는 Fiber-to-the-curb / Very high-rate digital subscriber line(FTTC/VDSL) 시스템의 DAVIC 표준 가입자 전송 기술인 51.84 Mb/s 16-CAP (Carrierless AM/PM) 전송시스템 (downstream)과 1.62 Mb/s QPSK burst-mode TDMA 전송시스템 (upstream)및, 타이밍 복원회로 등의 동작 원리 및 구조를 간략하게 기술하였다. 본 논문은 FTTC/VDSL 전송시스템 개발을 위하여 전체시스템이 운영될 환경, 즉 채널에 대하여 기술한 후, 주어진 채널에 적합한 down-stream전송시스템 알고리즘 및 구조를 설명하였으며, 타이밍 복원 시스템을 기술하였다. FTTC/VDSL시스템은 네트워크의 한 개의 송수신부가 가입자 댁내의 여러 개의 set-top box와 데이터를 주고받는 점 대 다점 (point-to-multipoint) 구조로 이루어져 있으며, 따라서 역 방향 (upstream) 채널 데이터 전송을 위한 QPSK 전송시스템은 네트워크쪽의 QPSK 수신부가 가입자 댁내의 여러개의 QPSK 송신부를 서비스할 수 있게끔 시분할 다중접속 방식인 burst-mode TDMA전송방식으로 구현되었다. FTTC/VDSL 전송시스템은 DAVIC의 시스템 성능 요구조건을 만족하게 설계되었으며, 모든 기능은 디지털로 구현되었고 칩 구현을 위하여 각 기능의 VLSI 시스템 파라메타 들을 추출하고 성능 시험을 실시하였다.

  • PDF

Wavelet Characterization of Profile Uniformity Using Neural Network

  • Park, Won-Sun;Lim, Myo-Teak;Kim, Byungwhan
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2002년도 ICCAS
    • /
    • pp.46.5-46
    • /
    • 2002
  • As device dimension shrinks down to sub 100nm, it is increasingly important to monitor plasma states. Plasma etching is a key means to fine patterning of thin films. Many parameters are involved in etching and each parameter has different impact on process performances, including etch rate and profile. The uniformity of etch responses should be maintained high to improve device yield and throughput. The uniformity can be measured on any etch response. The most difficulty arises when attempting to characterize etched profile. Conventionally, the profile has been estimated by measuring the slope or angle of etched pattern. One critical drawback in this measurement is that this is unable to cap...

  • PDF

Zircaloy-4 핵연료봉 레이저 용접부의 고온부식 특성 연구 (Corrosion Properties of Zircaloy-4 Cladding Tube having a Laser Welding Part in Elevated Temperature)

  • 김동균;박진석;김상태;양명승;이정원;김수성;정용환
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 춘계학술대회논문집A
    • /
    • pp.256-261
    • /
    • 2001
  • Corrosion and tensile properties of zircaloy-4 cladding tube having a laser welding part in elevated temperature are studied to present the criterion of quality evaluation in nuclear reactor and to found the scientific basis of SCC, with laser welding method using by coupling up cladding tube to end cap. In the result of tensile test($400^{\circ}C$), the fracture is not happened in the welding part but base metal and the result of corrosion test($400^{\circ}C$ 1500psi steam), corrosion rate of the molten zone and PMZ is a little higher than the other zone.

  • PDF

냉장고용 왕복동 압축기 급유 시스템의 수치해석 (Numerical Simulation of Oil Supply System of Reciprocating Compressor for Household Refrigerators)

  • 김현진;이진갑
    • 동력기계공학회지
    • /
    • 제9권4호
    • /
    • pp.24-30
    • /
    • 2005
  • For a reciprocating compressor of household refrigerators, a direct analogy between the pipe flow network and the electric circuit network has been utilized to set up a mathematical model for oil supply system. Individual lubrication elements of the oil supply system, such as propeller- installed oil cap, oil galleries, radial oil feeding holes, spiral oil grooves, and various sliding surfaces have been analogized by equivalent electric elements, and these have been combined together to form an electric circuit corresponding to the whole oil supply system. By solving the closed network equations of the model, oil flow rates at various lubrication elements could be obtained. Total amount of the oil flow rate drawn into the shaft has been measured and compared reasonably well with the prediction of the numerical simulation.

  • PDF

지르칼로이-4 피복관을 이용한 레이저용접성 연구 (A Study on the Laser Beam Weldability Using Zircaloy-4 Cladding Tube)

  • 박진석;김동균;김상태;양명승;김수성;이정원
    • Journal of Welding and Joining
    • /
    • 제20권6호
    • /
    • pp.72-72
    • /
    • 2002
  • Corrosion and tensile properties of zircaloy-4 cladding tube having a laser welding part in elevated temperature are studied to present the criterion of quality evaluation in nuclear reactor and find the scientific basis of SCC, with laser welding method using by coupling up cladding tube to end cap. In the result of tensile test(400℃), the fracture is not happened in the welding part but base metal and the result of corrosion test(400℃ 1500psi steam), corrosion rate of the molten zone and PMZ is a little higher than the other zone.

지르칼로이-4 피복관을 이용한 레이저용접성 연구 (A Study on the Laser Beam Weldability Using Zircaloy-4 Cladding Tube)

  • 박진석;김동균;김상태;양명승;김수성;이정원
    • Journal of Welding and Joining
    • /
    • 제20권6호
    • /
    • pp.796-801
    • /
    • 2002
  • Corrosion and tensile properties of zircaloy-4 cladding tube having a laser welding part in elevated temperature are studied to present the criterion of quality evaluation in nuclear reactor and find the scientific basis of SCC, with laser welding method using by coupling up cladding tube to end cap. In the result of tensile test($400^{\circ}C$), the fracture is not happened in the welding part but base metal and the result of corrosion test($400^{\circ}C$ 1500psi steam), corrosion rate of the molten zone and PMZ is a little higher than the other zone.