• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1998년도 춘계학술발표회논문집(2)
• /
• pp.175-180
• /
• 1998

The U-Zr metallic alloy with low swelling HT9 cladding is the candidate for the KALIMER fuel rod. The fuel rod should be able to maintain the structural integrity during its lifetime in the reactor. In a typical metallic fuel rod, load is mainly applied by internal gas pressure, and the deformation is primarily caused by creep of the cladding. The three-dimensional FEM modelling of a fuel rod is important to predict the structural behavior in concept design stage. Using the ANSYS code, the 3-D structure analyses were performed for various configuration, element and loads. It has been shown that the present analysis model properly evaluate the structural integrity of fuel rod. The present analysis results show that the fuel rod is expected to maintain its structural integrity during normal operation.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.608-613
• /
• 2007

Fine pitch microprobe arrays are microneedle-like probes for inspecting the pixel of LCD panel. They are usually made of multilayers of metallic, nonmetallic, or combination of the two. In this study, the microprobe arrays were fabricated using the process applied for MEMS fabrication technology and they consist of BeCu, BeNi, or Si. Their contacting probing force and deflection were measured using the laser equipment. The design requirement are 5gf of a minimum contact force and $150{\mu}m$ of a maximum deflection. A lot of microprobe shape are possible satisfying the requirement. A double cantilever-type microprobe having needles on both ends were applied for this study. Several candidate were chosen using the topology and shape optimization technique subjected to the design requirements. Finite element results and experimental results were compared and both gave good correlation.

• 산업경영시스템학회지
• /
• 제21권48호
• /
• pp.101-111
• /
• 1998

CNS (Car Navigation System) is the most compatible candidate among various in-vehicle information systems as a provider of ITS (Intelligence Transport Systems) information. It generally consists of remote controller, display, CD-changer, GPS receiver and so on. Among them, display is the most important and critical element of the HMI (Human-Machine Interface) suggesting the digital map to the driver. Therefore, it is certain that the display gives cognitive, physical, mental and visual workloads to the driver which are directly related with the driver's and road safety with the success of ITS. Until now, various human factors techniques have been developed and applied to estimate the driver's workload and to collect the driver's requirements of the CNS digital map, for example, mental workload assessment, visual activity analysis, cognitive analysis and so on. In addition to these kinds of techniques, this research performed the human sensibility ergonomics approach to directly investigate and evaluate the driver's requirements and sensibilities of the real products.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 가을 학술발표회 논문집
• /
• pp.19-26
• /
• 2004

This study constructs the reduced system by two-level condensation scheme. This scheme consists of two steps. First step selects the candidate area for the primary degrees of freedom by energy estimation in element level. In the second step, the primary degrees of freedom are selected by the sequential elimination scheme. The efficiency and reliability of this scheme is shown through the prediction of eigenvalues of a few numerical examples. Time integration in the reduced system can save the computing time effectively. The well-constructed reduced system can present the accurate behavior of the structure under arbitrary dynamic loads so much as the global system. Through the numerical example, the efficiency and reliability of the proposed scheme will be demonstrated.

• Applied Microscopy
• /
• 제45권2호
• /
• pp.52-57
• /
• 2015

Bulk metallic glass (BMG) shows higth strength, high elastic limit, corrosion resistance and good wear resistance and soft magnetic properties and has been considering as a candidate for new structural materials. But they show limited macroscopic plasticity and lack of tensile ductility due to highly localized shear deformation, which should be solved for real structural application. In this paper researches on the enhancement of plasticity of BMG were reviewed briefly. Introducing heterogeneous structure in glass is effective to induce more shear transformation zones (STZs) active for multiple shear band initiation and also to block the propagating shear band. Several methods such as BMG alloy design for high Poisson's ratio, addition of alloying element having positive heat of mixing, pre-straining BMG and variety of BMG composites have been developed for homogenous distribution of locally weak region, where local strain can be initiated. Therefore enhancement of plasticity of BMG is normally accompanied with some penalty of strength loss.

• Journal of Mechanical Science and Technology
• /
• 제20권3호
• /
• pp.310-318
• /
• 2006

In this study, we investigate the feasibility of in-situ crack propagation by using a double cleavage drilled compression (DCDC) specimen showing a slow crack velocity down to 0.03 mm/s under 0.01 mm/s of displacement control. Finite element analysis predicted that the DCDC specimens would show at least 4.3 fold delayed crack initiation time than conventional tensile fracture specimens under a constant loading speed. Using DCDC specimens, we were able to observe the in-situ crack propagation process in a particle reinforced transparent polymer composite. Our results confirmed that the DCDC specimen would be a good candidate for the in-situ observation of the behavior of particle reinforced composites with slow crack velocity, such as the self-healing process of micro-particle reinforced composites.

• Journal of Welding and Joining
• /
• 제31권3호
• /
• pp.22-30
• /
• 2013

Due to ELV banning, automotive electronics cannot use four kinds of heavy metal element (Pb, Hg, Cd, $Cr^{6+}$) from 2016. Therefore, this study was focused on degradation characteristics of Sn-3.0Ag-0.5Cu Lead-free solder joint with OSP and ENIG finsh under various reliability assessment method, as like to thermal shock test and high temeprature/high humidity test with test duration for cabin electronics. Also, we compared bonding strength degradation to other advanced research results of electronic control unit for engine room because of difference service temperature with mount location in automotive. Whisker growth phenomenon and mitigation method which were essentially consideration items for Pb-free car electronics were examined. Conformal coating is a strong candidate for mitigating whisker growth in automotive electronics. Necessary condition to adapt Pb-free in car electronics was shown.

• 대한기계학회논문집A
• /
• 제25권9호
• /
• pp.1444-1451
• /
• 2001

The evolutionary structural optimization(ESO) method has been under continuous development since 1992. The bidirectional evolutionary structural optimization(BESO) method is made of additive and removal procedure. The BESO method is very useful to search the global optimum and to reduce the computational time. This paper presents the ranked bidirectional evolutionary structural optimization(R-BESO) method which adds elements based on a rank, and the performance indicator which can estimate a fully stressed model. The R-BESO method can obtain the optimum design using less iteration number than iteration number of the BESO.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.646-651
• /
• 2004

Crashworthy design of a train is a systematic approach to ensure the safety of passengers and crews in railway transportation for the prescribed accident scenarios. This approach needs new structural arrangements and designs to absorb higher levels of impact energy in a controlled manner and interior designs to minimize passenger injuries. In this paper, crashworthy design approach is applied to the tilting train express (TIX) design which is newly being developed. Based on a head-on collision and a level crossing collision scenarios, the crash behaviors of a TTX design candidate arc evaluated numerically using the finite element method. Finally, design alternatives which show better crashworthy performances are proposed and verified through the full-rake collision simulations.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.381-384
• /
• 2004

Delaying and objection for the construction of storage spent-fuel disposal has prompted to consider expanding on-site storage of spent reactor fuel since it can eliminate the need for costly and difficult shipping and control of the spent fuel completely under the direction of the owner-utility. The dry storage unit developed in Canada can accommodate Korea heavy water reactor fuel elements and become a candidate for the Korean market. In this paper, finite element analyses were carried out in order to investigate the structural behavior of the nuclear spent fuel dry storage system, which is subjected to impact loads such as collision of a truck load and dropping of flask under the irregular operation.