• Journal of Advanced Navigation Technology
• /
• v.13 no.5
• /
• pp.773-780
• /
• 2009

This study proposed a face region detection algorithm using fuzzy inference of pixel hue and intensity. The proposed algorithm is composed of light compensate and face detection. The light compensation process performs calibration for the change of light. The face detection process evaluates similarity by generating membership functions using as feature parameters hue and intensity calculated from 20 skin color models. From the extracted face region candidate, the eyes were detected with element C of color model CMY, and the mouth was detected with element Q of color model YIQ, the face region was detected based on the knowledge of an ordinary face. The result of experiment are conducted with frontal face color images of face as input images, the method detected the face region regardless of the position and size of face images.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.622-625
• /
• 2008

SIL-based optical disk drive will be promising candidate of next-generation storage devices. However, a near-field optical disk drive requires the robustness to external shock because of extremely small gap between SIL and media. Especially, high-level shock damages permanently to SIL and it makes difficulties in general application. To study the likelihood of failure, the shock analysis must be performed over all others. This research explores the dynamic characteristics of rotating disk through FEM which is compared to analytical solution and experimental modal analysis. We also develop the finite element model of an optical disk drive, which includes rubber mounts, sled base, rotating disk and pickup assembly, and simulate the shock response.

• Journal of Sensor Science and Technology
• /
• v.33 no.3
• /
• pp.173-178
• /
• 2024

Development of pressure sensors for harsh environments with high pressure, humidity, and temperature is essential for many applications in the aerospace, marine, and automobile industries. However, existing materials such as polymers, adhesives, and semiconductors are not suitable for these conditions and require materials that are less sensitive to the external environment. This study proposed a pressure sensor that could withstand harsh environments and had high durability and precision. The sensor comprised a piezoresistor pattern and an insulating film directly formed on a stainless-steel membrane. To achieve the highest sensitivity, a pattern design method was proposed that considered the stress distribution in a circular membrane using finite element analysis. The manufacturing process involved depositing and etching a dielectric insulating film and metal piezoresistive material, resulting in a device with high linearity and slight hysteresis in the range of a maximum of 40 atm. The simplicity and effectiveness of this sensor render it a promising candidate for various applications in extreme environments.

• Genomics & Informatics
• /
• v.5 no.4
• /
• pp.174-178
• /
• 2007

The earliest stages of mammalian embryogenesis are governed by the activity of maternally inherited transcripts and proteins. Cytoplasmic polyadenylation of selected maternal mRNA has been reported to be a major control mechanism of delayed translation during preimplantation embryogenesis in mice. The presence of cis-elements required for cytoplasmic polyadenylation (e.g., CPE) can serve as a useful tag in the screening of maternal genes partaking in key functions in the transcriptionally dormant egg and early embryo. However, due to its relative simplicity, UA-rich sequences satisfying the canonical rule of known CPE consensus sequences are often found in the 3'-UTR of maternal transcripts that do not actually undergo cytoplasmic polyadenylation. In this study, we developed a method to confirm the validity of candidate CPE sequences in a given gene by a multiplex comparison of 3'-UTR sequences between mammalian homologs. We found that genes undergoing cytoplasmic polyadenylation tend to create a conserved block around the CPE, while CPE-like sequences in the 3'-UTR of genes lacking cytoplasmic polyadenylation do not exhibit such conservation between species. Through this cross-species comparison, we also identified an alternative CPE in the 3'-UTR of tissue-type plasminogen activator (tPA), which is more likely to serve as a functional element. We suggest that verification of CPEs based on sequence conservation can provide a convenient tool for mass screening of factors governing the earliest processes of mammalian embryogenesis.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.197-201
• /
• 2007

Vibration characteristics of an annular cylindrical fuel rod, which was proposed as a candidate design of fuel's cross section for the ultra-high burnup nuclear fuel, according to the cross-sectional dimensions and the number of supports or the span length were analytically studied. Finite element(FE) modeling for the annular cross sectional fuel was based on the methodology, that have been proven by the test verification, for the conventional PWR nuclear fuel rod. A commercial FEA code, ABAQUS, was used for the FE modeling and analysis. A planar beam element (B21) that uses a linear interpolation was used for the fuel rod and a linear spring element for the spring and dimple of the SG. Natural frequencies and mode shape were calculated according to the preliminary design candidates for the fuel's cross sectional dimension and the number of span. From the analysis results, the design scheme of the annular fuel compatible to the present PWR nuclear reactor core was discussed in terms of the number of supports and fuel's cross section.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.4 s.181
• /
• pp.153-161
• /
• 2006

Micro-forming is a suited technology to manufacture very small metallic parts(several $mm{\sim}{\mu}m$). Micro-forming of $Zr_{62}Cu_{17}Ni_{13}Al_8$ bulk metallic glass(BMG) as a candidate material for this developing process are feasible at a relatively low stress in the supercooled liquid state without any crystallization during hot deformation. In this study, micro- formability of a representative bulk metallic glass, $Zr_{62}Cu_{17}Ni_{13}Al_8$. was investigated for micro-forging of U-shape pattern. Micro-formability was estimated by comparing $R_f$ values ($=A_f/A_g$), where $A_g$ is cross-sectional area of U groove, and $A_f$ the filled area by material. Micro-forging process was simulated and analyzed by applying finite element method. FEM simulation results showed reasonable agreement with the experimental results when the material properties and simulation conditions such as top die speed, remeshing criteria and boundary conditions were tightly controlled. The micro-formability of $Zr_{62}Cu_{17}Ni_{13}Al_8$ was increased with increasing load and time in the temperature range of the supercooled liquid state. Also, FEM simulation using a commercial software, DEFORM was confirmed to be applicable for the optimization of micro-forming process.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.589-592
• /
• 2005

Micro-forming is a suited technology to manufacture very small metallic parts(several $mm{\sim}{\mu}m$). Micro-forming of $Zr_{62}Cu_{17}Ni_{13}Al_8$ bulk metallic glass(BMG) as a candidate material for this developing process are feasible at a relatively low stress in the supercooled liquid state without any crystallization during hot deformation. In this study, micro-formability of a representative bulk metallic glass, $Zr_{62}Cu_{17}Ni_{13}Al_8$, was investigated for micro-forging of U-shape pattern. Micro-formability was estimated by comparing $R_f$ values $(=A_f/A_g)$, where Ag is cross-sectional area of U groove, and $A_f$ the filled area by material. Microforging process was simulated and analyzed by applying finite element method. FEM simulation results should reasonable agreement with the experimental results when the material properties and simulation conditions such as top die speed, remeshing criteria and boundary conditions tightly controlled. The micro-formability of $Zr_{62}Cu_{17}Ni_{13}Al_8$ was increased with increasing load and time in the temperature range of the supercooled liquid state. Also, FEM Simulation using DEFORM was confirmed to be applicable for the micro-forming process simulation.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.6
• /
• pp.563-569
• /
• 2009

In this paper, four different types of pulsed eddy current(PEC) probe are designed and their performance of detecting wall thickness reduction is compared. By using the backward difference method in time and the finite element method in space, PEC signals from various thickness and materials are numerically calculated and three features of the signal are selected. Since PEC signals and features are obtained by various types and sizes of probe, the comparison is made through the normalized features which reflect the sensitivity of the feature to thickness reduction. The normalized features indicate that the shielded reflection probe provides the best sensitivity to wall thickness reduction for all three signal features. Results show that the best sensitivity to thickness reduction can be achieved by the peak value, but also suggest that the time to peak can be a good candidate because of its linear relationship with the thickness variation.

• Korean Journal of English Language and Linguistics
• /
• v.1 no.4
• /
• pp.561-585
• /
• 2001

It has been claimed recently that the two computational operations Move and Agree of Chomsky (2000, 2001a) should be separated into distinct and independent operations. According to this view, Move is an “operation that applies only to meet an EPP-feature of a functional category.” It is also claimed under that analysis that “a candidate for Move is simply a syntactic object with phonetic content.” The purpose of this short paper is to show that the operation Move should still be viewed as composite; hence it must have the operation Agree as one of its prerequisites. We argue that the EPP feature of T may not be analyzed as an independent feature that triggers overt displacement in syntax. Under Chomsky's (2000, 2001a) theory, displacement in syntax must require the probe-goal (P, G) association before the actual movement takes place. It is shown in this paper that in order for an element $\beta$ to raise to the [Spec, T] position, the $\varphi$-features of T must establish a (P, G) relation with those of $\beta$ prior to movement. In short, Move requires Agree, the EPP feature being dependent on the minimal $\varphi$-feature [person] of nominals.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.2
• /
• pp.40.2-40.2
• /
• 2015

In our recent investigation (Lim et al. 2015), we have shown that the combination of narrow-band Ca photometry and low-resolution spectroscopy can effectively search for globular clusters (GCs) with supernovae (SNe) enrichments. We apply this technique to the metal-poor bulge GC NGC 6273 and find two distinct subpopulations having different light and heavy element abundances. Our result suggests that NGC 6273 was massive enough to retain SNe ejecta, which would place this cluster in the growing group of GCs with Galactic building block characteristics, such as ${\omega}$ Centauri and M22.