• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.1
• /
• pp.42-51
• /
• 2013

An experimental study was conducted on a subsonic wind tunnel to obtain aerodynamic coefficients for various situations in order to control the direction of a projectile. The angle of attack on the projectile was varied from $-5^{\circ}$ to $15^{\circ}$ and the roll angle of canard was changed from $0^{\circ}$ to $90^{\circ}$. The angle of attack on the canard was adjusted from $-20^{\circ}$ to $20^{\circ}$ and various inlet velocities were applied. Maximum Reynolds number based on the diameter of projectile was $5.5{\times}10^5$. The measured aerodynamic coefficients showed the same results for the various inlet velocities, and the highest effect on the canard was shown when the canard was set to the roll angle of $0^{\circ}$.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.1
• /
• pp.39-48
• /
• 2011

This study describes a range sensitivity of a canard controlled missile. An investigation was conducted into the relative importance of aerodynamic parameters on a guided missile. Also this study was analyzed by quantifying their effects on the missile range. To analyze the range sensitivity of a guided missile, a trajectory analysis program of a guided missile was developed. The range sensitivity analysis was conducted on a thrust, weight, drag and lift. The result of the range sensitivity analysis shows that the design parameters with the greatest effect on the missile range are thrust, drag, weight, and lift, in descending order of importance. The thrust on range extension is quite obvious to extend a range of a guided missile. In particular, the drag exhibited greater range sensitivity than lift at a guided flight. The result also shows that missile range could be maximized by applying the appropriate launch angle and canard pitch-up control.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.6
• /
• pp.31-38
• /
• 2002

This paper presents the analysis of the flight test data measured by the sensors installed on a four-seat canard aircraft. The inherent stall proof characteristics of canard aircraft was verified from the stall test. The dihedral effect, adverse yaw and roll control power were examined and the neutral point that determines the longitudinal stability of the aircraft was investigated. The dynamic characteristics such as dutch roll mode were also examined. Without relying on the parameter identification method, the aerodynamic derivatives or the relations between the aerodynamic derivatives were obtained by analyzing the steady state flight data.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.3
• /
• pp.220-228
• /
• 2008

In this study the aerodynamic characteristics of a canard-controlled missile with freely spinning tailfins were investigated by using a semi-empirical method and a CFD code. The mean aerodynamic coefficients for the rolling and roll damping moments were first calculated and then used to predict the roll-rate of freely spinning tailfins. The calculation of roll-rate in the CFD code was carried out by combining a Chimera overset grid system and 6-DOF analysis module. The predicted roll-rate was in good agreement with the experimental data for the roll and yaw canard control inputs. It was also shown that the results are in good agreement with the prediction by a CFD code. This indicates that the semi-empirical method can be used to predict the roll-rate of a canard-controlled missile with freely spinning tailfins.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.2
• /
• pp.22-31
• /
• 2005

A design study was conducted for a new concept aircraft(Canard Rotor/Wing: CRW) that has the capability of dual mode flight, a rotorcraft and a fixed wing mode. The CRW can show a vertical take off/landing and a high speed/efficiency cruise performance simultaneously. It is not surprising to develop a new sizing code for this class of aircraft because conventional sizing codes developed solely for either the rotary wing or the fixed wing aircraft are not adequate to design a dual mode aircraft operated both by the rotary wing through tip jet effux and the fixed wing lift. Thus, a new design code was developed based on the conventional sizing code by adding some features including rotor performance, duct flow, and engine flow analysis, hence could eventually predict the performance of reaction driven rotor, the flight performance and the flight characteristics. The various design parameters were investigated to find their influences on the flight performance then, a small UAV(Unmanned Aircraft Vehicle) of 1500 lbs class was optimally designed to have minimum weight using the developed sizing code.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.3
• /
• pp.187-194
• /
• 2015

Course correction munition is a smart projectile which improves its accuracy by the control mechanism equipped in the fuze section with canard. In this paper, various aerodynamic configurations of the fuze section were analysed by utilizing a semi-empirical method and a CFD method. A final canard configuration showing the least drag was then determined. During the CFD simulation, it was found that the k-${\omega}$ SST turbulence model combined with O-type grid base is suitable for the prediction of the base drag. Finally, the aerodynamic characteristics of the smart munition and the change of drag due to the canard installation were analysed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.680-683
• /
• 2005

The wing component model for flutter analysis consisting of stiffness, mass, and aerodynamic model has been constructed based on the full airframe finite element model for 4-seat canard-type small aircraft. A study on wing flutter characteristics has been investigated based on the wing component model constructed using PK method in MSC/NASTRAN for flutter analysis. In addition, wing flutter mechanism for the aircraft under consideration has been analyzed based on the results of normal mode and flutter analysis.

• Aerospace Engineering and Technology
• /
• v.3 no.2
• /
• pp.50-55
• /
• 2004

Performance predictions of the propulsion system were conducted for a 900㎏ class Canard Rotor/Wing vehicle. The main components of the propulsion system are turbojet engine, exhaust ducts and nozzles. The internal flow of the duct was considered as one-dimensional, compressible and viscous flow. Adequate governing equations including centrifugal force effect were applied to the analysis of the duct flows. Results such as available power, available thrust, engine throttle, mass flow rates, rotor RPM and cruise nozzle area were presented for rotary-wing mode and transition mode.

• Aerospace Engineering and Technology
• /
• v.6 no.2
• /
• pp.35-39
• /
• 2007

In this paper, we have presented structural analysis procedure and full scale test results for 4-seater canard airplane. Construction of the finite element model is critical path for the aircraft structural analysis and directly affects the structural integrity. The refinement of the finite element model should be determined depending on full scale test results. From the results of the structural analysis, 5 design limit loads test conditions and 11 design ultimate loads test conditions were selected. By the presented procedure, the structural integrity of 4-Seater Canard Airplane is successfully obtained.

• Journal of computational fluids engineering
• /
• v.14 no.4
• /
• pp.48-55
• /
• 2009

In this study, roll lock-in phenomena of freely spinning tailfins were investigated by a CFD code. To analyze a motion of freely spinning tailfins, this research use a Chimera method, an Euler code and a 6 degrees of freedom analysis. The numerical results of aerodynamic characteristics and roll rates of a canard-controlled missile with freely spinning tailfins show a good agreement with wind tunnel test results. Using the roll rates calculation result of freely spinning tailfins, roll lock-in phenomena is confirmed. Roll lock-in phenomena and Roll lock-in states can be predicted through effects of the induced vortex of the canards control and the analysis of the rolling moments of tailfins due to the bank angle.