• Restorative Dentistry and Endodontics
• /
• v.43 no.4
• /
• pp.42.1-42.7
• /
• 2018

Objectives: The purpose of this study was to investigate the C-shaped root canal anatomy of mandibular second molars in a Korean population. Materials and Methods: A total of 542 teeth were evaluated using cone-beam computed tomography (CBCT). The canal shapes were classified according to a modified version of Melton's method at the level where the pulp chamber floor became discernible. Results: Of the 542 mandibular second molars, 215 (39.8%) had C-shaped canals, 330 (53%) had 3 canals, 17 (3.3%) had 2 canals, 12 (2.2%) had 4 canals, and 8 (1.7%) had 1 canal. The prevalence of C-shaped canals was 47.8% in females and 28.4% in males. Seventy-seven percent of the C-shaped canals showed a bilateral appearance. The prevalence of C-shaped canals showed no difference according to age or tooth position. Most teeth with a C-shaped canal system presented Melton's type II (45.6%) and type III (32.1%) configurations. Conclusions: There was a high prevalence of C-shaped canals in the mandibular second molars of the Korean population studied. CBCT is expected to be useful for endodontic diagnosis and treatment planning of mandibular second molars.

• Restorative Dentistry and Endodontics
• /
• v.11 no.1
• /
• pp.27-32
• /
• 1985

The purpose of this study was to examine the influence of canal irrigants and smear layer on the property of apical seal. Fourty-five canals from human teeth were randomly selected and divided into 5 groups according to the irrigants used in conjunction with instrumentation. The irrigants were RC-prep in combination with Naocl, Citric acid, Naocl, Naocl in combination with $H_2O_2$, and normal saline solution. After instrumention and dry the canal with paper point, the canals were obturated by lateral condensation of Zinc-oxide eugenol sealer and gutta percha cone. All the specimens were immersed in 2% methylene blue dye solution for 7 days and the depth of dye penetration into the canals was evaluated by macros cope. The following results were obtained. 1. All the canals experimented showed varying degree of dye penetration. 2. There was no significant difference in depth of dye penetration between the groups known to be effective and ineffective in the removal of the smear layer. 3. The canals irrigated with NaOCl alone showed the highest dye penetration and mean leakage was 7.7 mm. 4. In the canals irrigated with RC-prep in combination with Naocl and citric acid, the mean dye penetration was 5.5 mm and 4.8 mm respectively, and the canals irrigated with NaOCl in combination with $H_2O_2$ and normal saline solution revealed mean dye penetration of 3.9 mm.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2005.10a
• /
• pp.56-60
• /
• 2005

It is necessary to irrigate for agriculture in Korea and agricultural canals play important roles in irrigation. Nowadays gauging water discharge in canals is important because of water shortage in Korea. But It is rare to gauging water discharge in canals. Several water level gauges are installed in agricultural canals through TM/TC. But the abilities of the gauges are insufficient for agricultural water metering. In this situation, we are developing the water discharge metering system which is inexpensive and easy to maintain.

• Restorative Dentistry and Endodontics
• /
• v.42 no.4
• /
• pp.282-289
• /
• 2017

Objectives: It was aimed to compare the cyclic fatigue resistances of ProGlider (PG), One G (OG), and HyFlex EDM (HEDM) nickel titanium glide path files in single- and double-curved artificial canals. Materials and Methods: 40 PG (16/0.02), 40 OG (14/0.03), and 40 HEDM (10/0.05) single-file glide path files were used in the present study. Sixty files were subjected to cyclic fatigue test by using double-curved canals and 60 files by using single-curved canal (n = 20). The number of cycles to fracture (NCF) was calculated and the length of the fractured fragment (FL) was determined by a digital micro-caliper. Twelve pieces of fractured files were examined with scanning electron microscope to determine fracture types of the files (n = 2). The NCF and the FL data were analyzed using one-way analysis of variance and post hoc Tukey test using SPSS 21 software (p < 0.05). Results: In all of the groups, NCF values were significantly lower in double-curved canals when compared to single-curved canals (p < 0.05). For both of single- and double-curved canals, NCF values of HEDM group in apical and coronal curvatures were found to be significantly higher than NCF values of PG and OG groups (p < 0.05). In both of single- and double-curved canals, NCF value of PG group was found significantly higher than OG group (p < 0.05). Conclusions: Within the limitations of this study, HEDM glide path files were found to have the highest cyclic fatigue resistance in both of single- and double-curved canals.

• ALGAE
• /
• v.20 no.3
• /
• pp.217-224
• /
• 2005

The species composition and biomass of marine algae at the discharge canals of three (Gori, Wolseong and Uljin) nuclear power plants on the east coast of Korea were investigated seasonally from February 1992 to October 2000. As a result, 103-107 species of marine algae were found at the discharge canals during the past nine years. In general, algal communities established at the discharge canals were less diverse than those at the intake canals and control sites. 43 species (6 blue-green, 9 green, 10 brown and 18 red algae) of marine algae occurred more than 1/6 frequency and thus can be categorized as warm tolerant species. Among these, two green (Urospora penicilliformis, Cladophora albida), four brown (Sphacelaria divaricata, S. rigidula, Sargassum coreanum, S. fulvellum) and four red algae (Stylonema alsidii, Bangia atropurpurea, Hypnea charoides, Chondria crassicaulis) are recorded as warm tolerant marine algae for the first time in Korea during this study. Enteromorpha compressa, Padina arborescens, Amphiroa zonata and Ahnfeltiopsis flabelliformis were common species found more than 50% frequency at the discharge canals of all three nuclear power plants investigated. Dominant species in biomass were Padina arborescens and Amphiroa zonata. Results showed that, as a whole, the red algae appeared as predominant algal group at the discharge canals of all three nuclear power plants on the east coast of Korea. However, the biomass proportion of dominant algae at the discharge canals of each nuclear power plant varied over the year during the past nine years.

• Restorative Dentistry and Endodontics
• /
• v.20 no.1
• /
• pp.316-327
• /
• 1995

The purpose of this study was to evaluate canal shaping ability and canal angulation change of K-file, straight endosonic K-file and pre curved endosonic K-file. Twenty staight canals and thirty curved canals were selected and divided into five groups according to canals curvature and canal instrumentation method. VI group was prepared by straight endosonic K-file and H1 group by K-file in straigt canals. V2 group was instrumented by straight endosonic K-file, V3 group by pre curved endosonic K-file and H2 group by precurved K-file in curved canals. Radiographs of canals were obtained before and after canal shaping. And postoperative radiographs were compared with preoperative radiographs using superimposition method. The results obtained were as follows ; l. In straight canals, K-file group demonstrated lager percentage of canal enlargement than endosonic K-file group on facial view, but reverse results exhibit on mesial view. 2. In curved canals, precurved K-file group showed largest percentage of canal enlargement, followed by precurved endosonic K-fine group and straight endosonic K-file group was smallest. 3. Percantage of canal enlargement at convex side was greater than at concave side in apical portion of each group. Especially in straight endosonic K-file group, percantage of canal enlargement at convex side and concave side showed sharply difference. 4. In angulation change, the straight endosonic K-file group exhibited the greatest its change, followed by precurved endosonic K-file group and precurved K-file group was the least. Above results suggest that K-file is more effective endodontic instrument than endosonic K-file, and that precurved file is effective for canal shaping in curved canal.

• Restorative Dentistry and Endodontics
• /
• v.22 no.2
• /
• pp.648-658
• /
• 1997

The purpose of this study was to compare the effects of various techniques on the quality and quantity of instrumentation in curved canals. Instrumentation time was evaluated too. Forty eight canals of resin blocks($35^{\circ}$) were divided into three groups and filed. In group A, 16 blocks were instrumented using a step-back technique with stainless steel(SS) K-file(Mani, Matsutani Seisakusho Co.,Japan). In group B, canals were prepared with SS K-files using the Endo-Angle (Nakanishi Dental MFG.CO.,LTD.,Japan). Group C was prepared using N i-Ti engine-driven instruments (Quantec Series $2000^{TM}$ system). Group A and B were filed from # 5 to # 25 at the apex followed by a 1 mm stepback technique, and the coronal half of the canals were flared with Gates Glidden burs(#2,3,4). Group C was instrumented from # 1 to # 8. After the instrumentation time was measured, canals were filled with India ink, and photographed, which to magnify the canal images 8 times. Using these photographs the apical portions were evaluated And scored from 1 to 4 according to the severity of ledging and zipping. On the same photographs, the area of the coronal two thirds of the canals were measured using a personal computer with the computer program Brain and Digitizer (SummaSketch III). The following results were obtained. 1. Instrumentation time was significantly shorter for group C, as opposed to group A and B(ANOVA, P<0.05). 2. The qualitative evaluation of the apical portions of the canals showed no significant difference between the groups(Kruscal-Wallis, p>0.05). 3. The area removed by group C was significantly smaller than group A and B(ANOVA, P<0.05).

• Imaging Science in Dentistry
• /
• v.36 no.3
• /
• pp.137-143
• /
• 2006

Purpose : To evaluate location, distribution, diameter, and length of the nutrient canals on mandibular anterior region using a cone beam computed tomography (CBCT). Materials and Methods : Mandibular CBCT was performed on 33 adults (18 males and 15 females) with no history of systemic disease, and any other dental surgery history Location, distribution, diameter, and length of the nutrient canals on mandibular anterior region were radiographically evaluated. A statistical comparison was done by SPSS. Results : In the location and distribution of nutrient canals, they were found in 6.8% at labial portion above root apex, in 93.28% at lingual portion above root apex in 46.2% at labial portion below root apex, and in 53.6% at lingual portion below root apex. Nutrient canals at lingual portion above root apex were most frequently observed between central and lateral incisors, and those at labial and lingual portion below root apex were most frequently observed between central incisors. The mean diameters of nutrient canals were 0.54 mm at labial portion above root apex, 0.61 mm at lingual portion above root apex, 0.66 mm at labial portion below root apex, and 0.76 mm at lingual portion below root apex. The mean lengths of nutrient canals were 2.63 mm at labial portion above root apex, 3.74 mm at lingual portion above root apex, 4.51 mm at labial portion below root apex, and 6.77 mm at lingual portion below root apex. Conclusion : CBCT is useful device to evaluate the anatomical structure of nutrient canals on mandibular anterior region.

• The Journal of the Korean dental association
• /
• v.41 no.5 s.408
• /
• pp.359-361
• /
• 2003

A cases report is presented describing treatment : of a mandibular first molar in which three canals were located, prepared, and obtained in the mesial root. The incidence of middle mesial canals in mandibular molars is reviewed 물 treatment considerations are described.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.27 no.4
• /
• pp.31-41
• /
• 1985

This paper compares the estimated total construction and maintenance costs for irrigation canals in six irrigation districts near Pyongtaek. Three conventional canal types were considered: concrete bench flumes, concrete-lined canals, and earth canals. The total expenses for each type were grouped to four catagories: the net construction, land acquisition, maintenance, and other expenses. The construction costs included the assumed costs for conveyance losses from each type of canals. The results from this study support earlier studies that the bench flumes are economically feasible. Initially cheaper conveyance systems like concrete-lined and earth canals demand 'higher maintenance costs and thus, their total expenses are summed to exceed those for the bench flumes within a few years following the construction. Banch flumes are economically justifiable for the main canals of the studying districts. Sensitivity analyses were executed to evaluate the relative importance of each expense to the total cost. The analyses show that total expenses very significantly with the change of the following costs: cost for conveyance losses, net construction, maintenance, and land acquisition, in that order However, other expenses contribute little if not at all to the total. The results indicate that bench flumes should be adopted as main canal structures for most irrigation districts in the Republic.