• Restorative Dentistry and Endodontics
• /
• 제39권4호
• /
• pp.258-264
• /
• 2014

Objectives: This in vitro study aimed to investigate the ability of Candida albicans (C. albicans) and Enterococcus faecalis (E. faecalis) to penetrate dentinal tubules of instrumented and retreated root canal surface of split human teeth. Materials and Methods: Sixty intact extracted human single-rooted teeth were divided into 4 groups, negative control, positive control without canal instrumentation, instrumented, and retreated. Root canals in the instrumented group were enlarged with endodontic instruments, while root canals in the retreated group were enlarged, filled, and then removed the canal filling materials. The teeth were split longitudinally after canal preparation in 3 groups except the negative control group. The teeth were inoculated with both microorganisms separately and in combination. Teeth specimens were examined by scanning electron microscopy (SEM), and the depth of penetration into the dentinal tubules was assessed using the SMILE view software (JEOL Ltd). Results: Penetration of C. albicans and E. faecalis into the dentinal tubules was observed in all 3 groups, although penetration was partially restricted by dentin debris of tubules in the instrumented group and remnants of canal filling materials in the retreated group. In all 3 groups, E. faecalis penetrated deeper into the dentinal tubules by way of cell division than C. albicans which built colonies and penetrated by means of hyphae. Conclusions: Microorganisms can easily penetrate dentinal tubules of root canals with different appearance based on the microorganism size and status of dentinal tubules.

• Restorative Dentistry and Endodontics
• /
• 제28권4호
• /
• pp.341-347
• /
• 2003

This study was conducted to evaluate the temperature rise on the root surface while the root canal is being obturated using continuous wave of condensation technique. Maxillary central incisor was prepared for repeated canal obturation. Ten thermocouples (Omega Engineering Inc., Stanford, USA) were placed at 1 mm increment from the anatomical root apex. The real temperature of Buchanan plugger was recorded before insertion into the root canal. The root canal was obturated with continuous wave of condensation technique as described by Buchanan and the root surface temperature was recorded during obturation at $150^{\circ}C,{\;}200^{\circ}C,{\;}250^{\circ}C{\;}and{\;}300^{\circ}C$ temperature settings of System B HeatSource (Model 1005, Analytic technologies, Redmond, WA, USA). After completion of the temperature recording, the dentinal-cementum thickness at each sites was measured. The data were analyzed using one-way ANOVA followed by Scheffe's test and linear regression test. The results were as follows. 1. When the temperature was set at $150^{\circ}C,{\;}200^{\circ}C,{\;}250^{\circ}C{\;}and{\;}300^{\circ}C$ on the digital display of System B HeatSource, the real temperature of the plugger at the 1mm point from the tip revealed $130.82{\pm}2.96^{\circ}C,{\;}158.00{\pm}5.26^{\circ}C,{\;}215.92{\pm}6.91^{\circ}C{\;}and{\;}249.88{\pm}3.65^{\circ}C$ respectively. 2. The position of 8 mm from the anatomical apex showed the highest temperature increase at each temperature settings and it was significantly higher than those of other positions (p<0.0l). The temperature rise was constantly increased toward coronal portion from apex of the root. 3. The maximum temperature increase on the root surface was $2.37{\pm}0.09^{\circ}C{\;}at{\;}150^{\circ}C{\;}setting,{\;}3.11{\pm}0.12^{\circ}C{\;}at{\;}200^{\circ}{\;}setting,{\;}3.93{\pm}0.09^{\circ}C{\;}at{\;}250^{\circ}C{\;}setting{\;}and{\;}5.69{\pm}0.15^{\circ}C{\;}at{\;}300^{\circ}C$ setting respectively. These results suggest that it be relatively kind to the supporting tissues of the root that the root canal is obturated using continuous wave of condensation technique at $150^{\circ}C,{\;}200^{\circ}C,{\;}250^{\circ}C{\;}and{\;}300^{\circ}C$ temperature settings on digital temperature display of System B HeatSource.

• Restorative Dentistry and Endodontics
• /
• 제23권1호
• /
• pp.366-378
• /
• 1998

Thermocondensation root canal filling technique have been used to fill accessary canals or to obtain homogeneous root caral fillings. But these thermocondensation technique inevitably produce heat in the canal which can be transmitted through the dentin and cementum and consequently damage periodontal ligamental cells and osteoblasts. In this study, System $B^{TM}$(Analytic technology, WA.D.S.A.) was used to evaluate the reaction of periodontal ligament tissue to "Continous Wave condensation technique" introduced by Buchanan, and the transmitted root surface temperature was measured according to measured root thicknesses. 12 Mandibular incisors of two adult dogs were used for the experiment. 6 controls were filled by lateral condensation technique with sealer.3 specimens were apically filled by Continuous Wave technique at $200^{\circ}C$ for 5 seconds and remaining 3 specimens were additionally backfilled using System $B^{TM}$(Analytic technology, WA.D.S.A.) was used to evaluate the reaction of periodontal ligament tissue to "Continous Wave condensation technique" introduced by Buchanan, and the transmitted root surface temperature was measured according to measured root thicknesses. 12 Mandibular incisors of two adult dogs were used for the experiment. 6 controls were filled by lateral condensation technique with sealer.3 specimens were apically filled by Continuous Wave technique at $200^{\circ}C$ for 5 seconds and remaining 3 specimens were additionally backfilled using System $B^{TM}$ at $100^{\circ}C$ for 20 seconds. Six weeks later, the dogs were sacrificed and the teeth stained with Hematoxylin and Eosin for histologic examination. 6 extracted human teeth were used to measure the transmitted temperature. After cutting off the crown, the canals were prepared and divided into 3 groups with root thickness of 1.5mm, 1.0mm, 0.5mm, 2 teeth in each group. Inside each root canal, System $B^{TM}$ was heated as with the temperature for the apically condensed and the back filled group, and the transmitted heat was measured on the external surface of the root. The temperature of System $B^{TM}$ heat spreader at $200^{\circ}C$ and $100^{\circ}C$ was also measured at root temperature. It can be concluded as follows: 1. In the thin area (200-$250{\mu}m$) of the root, root resorption could be seen even with heating at $200^{\circ}C$ for 5 seconds. 2. When the spreader was heated at $200^{\circ}C$ for 5 seconds and additionally at $100^{\circ}C$ for 20 seconds for backfill, all teeth showed root resorption regardless of their root thickness. 3. The transmitted external root surface temperature was higher as the root thickness decreased and as the heating time increased. In the thermocompaction technique using System $B^{TM}$, the spreader should be heated for the minimal time and used only in the apical area. The heated spreader shouldn't inserted to the binding point of the canal and backfilling should be done with other means of minimally heated gutta percha technique.

• Restorative Dentistry and Endodontics
• /
• 제19권1호
• /
• pp.97-105
• /
• 1994

The purpose of this study was to evaluate the smear layer removing efficiency of two root canal preparation techniques. Twelve single-rooted teeth were used in two groups of six each. Group 1 was biomechanically prepared by hand using a K-file with a high volume of normal saline irrigation. Group 2 was. prepared by using ultrasonically activated K-file with a constant high volume of normal saline irrigation. After the experimental procedures, each root was split saggitally. The removing efficiency of the preparation methods were assessed in terms of surface condition of the canal walls at three levels, those coronal, middle, and apical thirds. On the basis of remaining debris, presence of smear layer, and patency of dentinal tubules, each canal was evaluated according to a scale form 0 to 2. A statistical analysis was used to indicated any significant differences in surface condition between the two methods. There was no statistical significance between hand instrumentation and ultrasonic instrumentation at the cervical third but removing efficiency of ultrasonic instrumentation was superior. No statistically significant differences were obhserved for middle or apical third.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2001년도 춘계학술대회
• /
• pp.243-244
• /
• 2001

Root resorption is conventionally divided into internal and external varieties. Internal resorption occurs where there is loss of the internal wall of the root canal. and is usually associated with a localized area of necrotic pulp(Trope '||'&'||' Chivian 1984). External resorption occurs where there is loss of the external surface of the root and the resorption may be either transient or progressive(Tronstad 1988). External inflammatory resorption usually occurs following damage to the periodontal ligament or where there is communication between the periodontal ligament and a necrotic pulp. via open dentinal tubules or accessory canals. This type of resorption is usually progressive until root canal treatment is instituted (Barclay 1993).

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제37권2호
• /
• pp.109-113
• /
• 2011

Introduction: To correct the facial asymmetry by mandibular jaw surgery, it is important to know the anatomy of the mandible including the mandibular canal positioning of patients with facial asymmetry. This study was performed to evaluate the differences in the cross-sectional surface in the body of the mandible between the deviated side and opposite side in patients with facial asymmetry. Materials and Methods: The study was conducted on 37 adult patients composed of 2 groups, the asymmetry group (n=20) and non-asymmetry group (n=17). Using the cross-sectional computed tomography (CT) images, the distance from the buccal aspect of the mandibular canal to the outer aspect of the buccal cortex, distance from the buccal aspect of the mandibular canal to the inner aspect of the buccal cortex, distance from the inferior aspect of the mandibular canal to the inferior border of the mandible, thickness of the mandible, and cross-sectional surface area of the mandible were measured in each side of the mandible Results: The cross-sectional area of the mandible including the mandibular canal positioning in the deviated side was not statistically different from the opposite side in the asymmetry group. Only the distance from the inferior aspect of the mandibular canal to the inferior border of the mandible in the ramus area of the deviated side was significantly longer than opposite side. On the other hand, the bucco-lingual width of the asymmetry group was thinner than the non-asymmetry group. Conclusion: The cross-sectional area including the mandibular canal of the mandible did not appear to be modified by the facial asymmetry.

• 한국발생생물학회지:발생과생식
• /
• 제4권1호
• /
• pp.1-6
• /
• 2000

광학, 주사 및 투과전자현미경을 이용하여 무지개송어(Oncorhynchus mykiss) 성숙난자의 방사대와 난문 및 정자가 난문으로부터 난세포질까지 침투하는 과정의 미세구조를 조사하였다. 무지개송어의 난문은 깔때기 모양의 전정부와 방사대를 가로 지르는 나사선 모양의 도관으로 구성되어 있었다. 난문은 윗부분은 편평하면서 긴 도관 모양을 가지고 있었고, 난문벽은 시계방향(우선형)의 구조를 나타내었다. 난문 주변부에 있는 난표면에는 정자를 접촉시키는 데 필요한 유인물 질을 분비하는 무수한 많은 돌출물이 원을 이루면서 존재하였다. 침투 초기단계에 난문의 도관에 있는 한 마리의 정자는 난표면에 수직상태로 확인되었고, 곧이어 수정이 이루어진지 250초가 경과하자 정자두부는 사라지게 되었다. 정자두부가 난내부로 침투한 이후에 난표면에 있던 돌출물의 상호연결부위는 관찰되지 않았다. 다른 부위로 정자가 침투하는 지를 살펴보았지만 그러한 흔적은 확인되지 않았다. 난문의 수정추의 형태적인 구조를 관찰한 결과 이 미세구조물은 단 한 마리의 정자만을 허용함으로써 다정자침입을 방지하는 것으로 확인되었다.

• 대한조선학회지
• /
• 제23권2호
• /
• pp.27-32
• /
• 1986

This paper describes an application of the adaptive finite element computations to a free surface flow problem in a canal. A-posteriori error estimates for the adaptive finite element computations are based on the dual extremum principles. Previously the dual extremum principles were applied to compute the upper and lower bounds of the added mass of two-dimensional cylinders in a canal[1,2]. However, the present method improves the convergence of the computed results by utilizing the local error estimates and by applying the adaptive meshes in the finite element computations. In a test result using triangular elements it is shown that the numerical error in the adaptive finite elements reduces quadratically compared with that in a uniform mesh subdivision.

• Restorative Dentistry and Endodontics
• /
• 제27권4호
• /
• pp.432-440
• /
• 2002

The purpose of this study is to identificate root canal system including ideal access placement, root curvature, canal configuration, incidence of isthmus in mandibular incisors for success of endodontic treatment. 200 mandibular incisors were selected. The ideal access placement was determimed as follows. The teeth there radiographed from mesiodistal and buccolingual views using intraoral dental film. The image was divided into coronal, middle and apical third using the proximal film. Straight line access was determined by measuring the faciolingual canal width and placing points at midway point between the buccal and lingual wall at the junction of the middle and apical third and at the juntion of coronal and middle third of the root canal. A line was drawn connecting these two points extending through the crown of the tooth. The point at which the line crossed the external crown surface was recorded as facial, incisal, lingual. Degree of root curvature was determined by Schneider Protractor Method. Both section method and clearing method were used in this study. By section method, 100 mandibular incisors were embedded in clear resin and transeverse serial sectioned at 0.5, 1.0, 2.0, 3.0, 4.0, 5.0mm level from root apex. The resected surfaces were stained by methylene blue and examined under $\times$40 magnification with a stereomicroscope. By clearing method, 100 mandibular incisors were cleared in methysalicylate after decalcification with 10% nitric acid and evaluated under $\times$18 magnification with a stereomicroscope. The results were as follows ; 1. 29% had the center of the plotted straight-line access facial to incisal edge, whereas 71% had straight-line access at the incisal edge. When incisal wear classified as extensive, the straight-line access was plotted on the incisal edge 95.5%. When incisal wear classified as slight/none, the straight-line access was plotted on the facial 65.9%. 2. Degree of curvature of main canal was straight or almost straight, and only 10% in buccolingual direction had a degree of curvature greater than 20 degrees and 5.5% in mesiodistal direction had. 3. In section method, canal configuration analysis showed that 51% of the specimen classified as type I, 27% as type II, 12% as type III, 10% as type IV. For theses setions with two canals, the incidence of an isthmus was 36.7%, 64.3%, 79.2%, 96.3%, 97.4%, 97.6% at each level and highest in 3~5mm sections. 4. In clearing method, canal configuration analysis showed that 74% of the specimen classified as type I, 11% as type II, 6% as type III, 9% as type IV. These results suggested that traditional access from lingual should be moved as far toward the incisal as possible to locate and debride the lingual canal and root canal system should be cleaned, shaped completely and obturated three dimensionally for successful endodontic treatment.

• Restorative Dentistry and Endodontics
• /
• 제23권2호
• /
• pp.710-717
• /
• 1998

The pH changes in 3 cavities prepared at the facial inner dentin and lingual outer dentin of the cervical portion and apical portion of roots filled with calcium hydroxide containing sealers were investigated. 50 extracted permanent teeth with single canal were instrumented with step-back method. An irrigant of 5% NaOCl was used between files. Then 3 small cavities were prepared. The cavity of apical portion and inner dentin cavity of coronal portion was cut a distance of about 1.0mm from the canal wall and outer dentin cavity of coronal portion was cut to a depth of about 0.5mm from root surface. 10 teeth of control group was not filled. 20 teeth were not flushed with 17% EDTA before using root canal sealers and then divided into 2 groups obturated with Sealapex and Apexit. The remaining 20 teeth were flushed with 17% EDTA and 5% NaOCl to remove smear layer and divided into 2 groups obturated with Sealapex and Apexit. The pH change of the dentin in each cavity was measured at 0, 1, 3, 5, 7, 15, 30 days with pH microelectrode(WPI Co., USA). The results were as follows: 1. The groups obturated with Sealapex and Apexit(calcium hydroxide based-sealers) have no increase in the pH level at root dentin. And there is no significant difference in pH level between groups obturated with Sealapex and Apexit(P>0.05). 2. Differences in pH levels between the treated and untreated groups with EDTA were not significant(P>0.05). 3. There is no significant difference in pH level between apical and cervical dentin, inner and outer dentin throughout the duration of the experiment(P>0.05).