• 한국측량학회지
• /
• 제38권6호
• /
• pp.511-519
• /
• 2020

카메라 캘리브레이션을 위해 일반적으로 체커보드를 이용하여 주점, 초점거리, 렌즈 왜곡을 결정한다. 체커보드는 평면 형태와 3차원 형태가 있으며 체커보드의 크기, 타겟의 배치와 타겟점의 개수에 따라 카메라 캘리브레이션 매개변수에 영향을 미친다. 본 연구에서는 스테레오 카메라 캘리브레이션을 위해 체커보드의 유형에 따른 정확도를 검사점을 이용하여 비교하였으며 이를 통해 가장 성능이 우수한 체커보드를 제안하는 것을 목적으로 하였다. 평면 형태의 크기가 큰 체커보드는 검사점과의 비교를 통해서 비교적 높은 정확도를 나타내었다. 그러나 체커보드의 크기로 인하여 이동과 회전이 불편하였고 스테레오 카메라에서 타겟점이 모두 나타날 수 있도록 촬영하는 것이 어려운 단점이 있었다. 평면 형태의 작은 크기로 제작된 체커보드는 이동 및 회전이 편리하지만 가장 낮은 3차원 정확도를 나타내었다. 높이 값이 있는 타겟을 부착한 체커보드는 타겟점의 3차원 좌표를 카메라 캘리브레이션을 위해서 관측장비를 이용하여 결정해야 하는 번거로움이 있었지만 크기가 작아 이동과 회전이 편리하였고 가장 높은 3차원 정확도를 나타내었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.178-180
• /
• 2006

In general, camera calibration has to be gone ahead necessarily to estimate a position and an orientation of the object exactly using a camera. Autonomous land system in order to run a vehicle autonomously needs a camera calibration method appling a camera and various road environment. Camera calibration is to prescribe the confrontation relation between third dimension space and the image plane. It means to find camera calibration parameters. Camera calibration parameters using the paved road and the unpaved road are estimated. The proposed algorithm has been detected through the image processing after obtaining the paved road and the unpaved road. There is able to detect easily edges because the road lanes exist in the raved road. Image processing method is two. One is a method on the paved road. Image is segmentalized using open, dilation, and erosion. The other is a method on the unpaved road. Edges are detected using blur and sharpening. So it has been made use of Hough transformation in order to detect the correct straight line because it has less error than least-square method. In addition to, this thesis has been used vanishing point' principle. an algorithm suggests camera calibration method using Hough transformation and vanishing point. When the algorithm was applied, the result of focal length was about 10.7[mm] and RMS errors of rotation were 0.10913 and 0.11476 ranges. these have the stabilized ranges comparatively. This shows that this algorithm can be applied to camera calibration on the raved and unpaved road.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1920-1925
• /
• 2004

This paper describes a new method for 3D object recognition which used surface segment-based stereo vision. The position and orientation of an objects is identified accurately enabling a robot to pick up, even though the objects are multiple and partially occluded. The stereo vision is used to get the 3D information as 3D sensing, and CAD model with its post processing is used for building models. Matching is initially performed using the model and object features, and calculate roughly the object's position and orientation. Though the fine adjustment step, the accuracy of the position and orientation are improved.

• 한국CDE학회논문집
• /
• 제18권4호
• /
• pp.283-289
• /
• 2013

Presented in this paper is an adaptive measuring procedure of dental impression using the Structured Light System. While measuring a complex object, such as dental impression, in the reverse engineering, it is not possible to acquire all parts of the scanned surface. Missing scanned data is resulted in holes in a created triangular mesh. The focus of this paper is to introduce an algorithm for automatic identification of additional scanning orientations to fill holes that are created by a default scan. The proposed algorithm was developed by the three major technological requirements: camera visibility, projector visibility, data reliability. In order to satisfy the requirements, the proposed algorithm determines additional scanning orientation from the orientation of a projection plane derived from the average normal vector of boundary triangles.

• 제어로봇시스템학회논문지
• /
• 제15권4호
• /
• pp.379-384
• /
• 2009

A human gaze detection and tracing method is importantly required for HMI(Human-Machine-Interface) like a Human-Serving robot. This paper proposed a novel three-dimension (3D) human gaze estimation method by using a face recognition, an orientation estimation and SVMs (Support Vector Machines). 2,400 images with the pan orientation range of $-90^{\circ}{\sim}90^{\circ}$ and tilt range of $-40^{\circ}{\sim}70^{\circ}$ with intervals unit of $10^{\circ}$ were used. A stereo camera was used to obtain the global coordinate of the center point between eyes and Gabor filter banks of horizontal and vertical orientation with 4 scales were used to extract the facial features. The experiment result shows that the error rate of proposed method is much improved than Liddell's.

• 한국정밀공학회지
• /
• 제14권4호
• /
• pp.126-135
• /
• 1997

A sensorless motion planner which succeeds in grasping a polygonal part firmly into a desired orientation has been developed through the dynamic analysis. The analytical results on the impact process with friction are used for modeling the contact motionduring the parallel-jaw grasp operation, which is com- posed of the pushing and the squeezing process. The developed planner succeeds in grasping a part into a specified orientation in the face of uncertainties of initial position and orientation of the part, motion direction of the finger, and the physical parameters such as the coefficients of friction and restitution. The motion planner has been fully implemented into a viable package on the computer system, and verified experimentally. The motion of parts is recorded using a high-speed video camera, and then compared to the results of the planner and the graphic simulation results that illustrate the simulated motion of the grasp operation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.631-632
• /
• 2006

The assembly of camera lens modules fur the mobile phone has not been automated so far. They are still assembled manually because of high precision of all parts and hard-to-recognize lens by vision camera. In addition, the very short life cycle of the camera phone lens requires flexible and intelligent automation. This study proposes a fast and accurate identification system of the parts by distributing the camera for 4 degree of freedom assembly robot system. Single or multi-cameras can be installed according to the part's image capture and processing mode. It has an agile structure which enables adaptation with the minimal job change. The framework is proposed and the experimental result is shown to prove the effectiveness.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2010년 춘계학술발표회 논문집
• /
• pp.211-215
• /
• 2010

This study is on the effective methods for non metric camera calibration for its use in accurate close range photogrammetric surveying. We tested four estimation methods used for calculating interior orientation parameters and two methods for building calibration field, one is using targets which have three dimensional coordinates and the other is using two dimensional grid targets. By analysing test results effective and accurate calibration methods were suggested.

• 전기학회논문지
• /
• 제59권11호
• /
• pp.2048-2057
• /
• 2010

Is this paper, a pedestrian inertial navigation system with vision is proposed. The navigation system using inertial sensors has problems that it is difficult to determine the initial position and the position error increases over time. To solve these problems, a vision system in addition to an inertial navigation system is used, where a camera is attached to a pedestrian. Landmarks are installed to known positions so that the position and orientation of a camera can be computed once a camera views the landmark. Using this position information, estimation errors in the inertial navigation system is compensated.

• 한국멀티미디어학회논문지
• /
• 제23권10호
• /
• pp.1229-1235
• /
• 2020

A line parallel to the ground is frequently shown in our daily life, which enables us to guess its direction. Especially, such a guess tends to become clear when a vanishing line of the ground is shown together. In this paper, a vision based pallet measurement method is suggested, which uses a technique for estimating three-dimensional direction of a line parallel to the ground. The technique computes actually a vector heading to intersection of a given imaged line parallel to the ground and the ground vanishing line determined previously on calibrating a measurement camera. Through an experiment of measuring a real commercial pallet with various orientation and distance, we found that the technique could measure the orientation of the pallet correctly and accurately. The technique worked well even though an edge line available on the front plane of a pallet was almost parallel to the ground vanishing line.