• Journal of Institute of Control, Robotics and Systems
• /
• v.3 no.3
• /
• pp.297-304
• /
• 1997

In stereo vision, camera modeling is very important because the accuracy of the three dimensional locations depends considerably on it. In the existing stereo camera models, two camera planes are located in the same plane or on the optical axis. These camera models cannot be used in the active vision system where it is necessary to obtain two stereo images simultaneously. In this paper, we propose four kinds of stereo camera models for active stereo vision system where focal lengths of the two cameras are different and each camera is able to rotate independently. A single closed form solution is obtained for all models. The influence of the stereo camera model to the field of view, occlusion, and search area used for matching is shown in this paper. And errors due to inaccurate focal length are analyzed and simulation results are shown. It is expected that the three dimensional locations of objects are determined in real time by applying proposed stereo camera models to the active stereo vision system, such as a mobile robot.

• Journal of the Korea Convergence Society
• /
• v.11 no.1
• /
• pp.25-31
• /
• 2020

In this study, a real time image integrating system which can reconstruct two images from a surface camera and an under water camera into one new image was developed to support Korea artistic swimming team. The developed system consists of four USB cameras (two USB 2.0 and two USB 3.0) sealed in water proof case and one note book computer, and a LabVIEW based real time image merging program was developed. During field test, problem in cooperative motion of acrobatic formation was found, and it was proved that correction of motion to improve skill of the player could be possible in real time with aid of the developed system. After the filed test, the developed system has been being used to support Korea artistic swimming team.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.3
• /
• pp.369-375
• /
• 2010

Since multi-view images can be utilized for 3D visualization and surveying as well, a system calibration is an essential procedure. The cameras in the system are mounted to the holder and their locations and attitudes are relatively fixed. Therefore, the locations and the attitudes of the perspective centers of the four oblique looking cameras can be calculated using the location and attitude of the nadir looking camera and the boresight values between the cameras. In this regard, this research is focusing on the analysis of the relative location and attitude between the nadir and oblique looking cameras based on the results of the exterior orientation parameters after the aerial triangulation of the real multiview images. We acquired high standard deviations of the relative locations between the nadir and oblique cameras. Standard deviations of the relative attitudes between the cameras were low when only the exterior orientations of the oblique looking cameras were allowed to be adjusted. Moreover, low standard deviations of the relative attitudes came when we considered not all the exterior orientations of the cameras but the attitudes of them only.

• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.16 no.3
• /
• pp.41-48
• /
• 2012

Objectives: The aims of this study are to design a optimized mechanical structure of digital tongue imaging system (DTIS) equipped with LEDs in aspects of object distance and camera angle of coverage. Methods and Results: We tried to find optimized object distance while recording a rectangular object of common tongue size. In case object distance is 22 cm or less, edge of the rectangle was not taken beyond the shooting range. In contrast, if object distance is 40 cm or more, the rectangle image was too small. Therefore when considering the variation of subjects, we selected distance of 35-40 cm as appropriate object distance for the DTIS. We also tried to find optimized angle between camera view axis and horizontal line. We photographed from the side of the face of 7 adults with exposed tongue. We drew an exposed tongue lines to connect the tongue tip points and the tongue root points by using the photos acquired from the side faces. And then we calculated the tongue exposure angles between the vertical line and the exposed tongue lines. Mean tongue exposure angle was $28.3^{\circ}$ when tongue was lightly exposed and $13.3^{\circ}$ when maximally. So we determined $73^{\circ}$ as appropriate slope angle of part in contact with face of the DTIS and by considering that the standard variation was great, we designed control gears to adjust the slope of the camera view axis and to regulate the object distance. Conclusions: We designed a optimized mechanical structure in object distance and slope angle of part in contact with face of the DTIS.

• Journal of Broadcast Engineering
• /
• v.15 no.6
• /
• pp.768-782
• /
• 2010

Because of the different shooting position between multi-view cameras and the imperfect camera calibration, Illumination mismatches of multi-view video can happen. This variation can bring about the performance decrease of multi-view video coding(MVC) algorithm. A histogram matching algorithm can be applied to recompensate these inconsistencies in a prefiltering step. Once all camera frames of a multi-view sequence are adjusted to a predefined reference through the histogram matching, the coding efficiency of MVC is improved. However the histogram distribution can be different not only between neighboring views but also between sequential views on account of movements of camera angle and some objects, especially human. Therefore the histogram matching algorithm which references all frames in chose view is not appropriate for compensating the illumination differences of these sequence. Thus we propose new algorithms both the image classification algorithm which is applied two criteria to improve the correlation between inter-view frames and the histogram matching which references and matches with a group of pictures(GOP) as a unit to advance the correlation between successive frames. Experimental results show that the compression ratio for the proposed algorithm is improved comparing with the conventional algorithms.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.6
• /
• pp.1431-1438
• /
• 1995

In this paper, we present a multiple-view stereo matching method in case of moving in the direction of optical axis with stereo camera. Also we analyze the obtainable depth precision to show that multiple-view stereo increases the virtual baseline with single-view stereo. This method decides candidate points for correspondence in each image pair and then search for the correct combinations of correspondences among them using the geometrical consistency they must satisfy. Adantages of this method are capability in increasing the accuracy in matching by using the multiple stereo images and less computation due to local processing. This method computes 3-D depth by averaging the depth obtained in each multiple-view stereo. We show that the resulting depth has more precision than depth obtainable by each independent stereo when the position of image feature is uncertain due to image noise. This paper first defines a multipleview stereo agorithm in case of moving in the direction of optical axis with stereo camera and analyze the obtainable precision of computed depth. Then we represent the effect of removing the incorrect matching candidate and precision enhancement with experimental result.

• Nuclear Engineering and Technology
• /
• v.53 no.1
• /
• pp.199-207
• /
• 2021

This paper deals with accurate image reconstruction of gamma camera using a coded-aperture mask based on pixel-type CsI(Tl) scintillator coupled with silicon photomultipliers (SiPMs) array. Coded-aperture imaging (CAI) system typically has a smaller effective viewing angle than Compton camera. Thus, if the position of the gamma source to be searched is out of the fully-coded field-of-view (FCFOV) region of the CAI system, artifacts can be generated when the image is reconstructed by using the conventional cross-correlation (CC) method. In this work, we propose an effective method for more accurate reconstruction in CAI considering the source distribution of partially-coded field-of-view (PCFOV) in the reconstruction in attempt to overcome this drawback. We employed an iterative algorithm based on compressed-sensing (CS) and compared the reconstruction quality with that of the CC algorithm. Both algorithms were implemented and performed a systematic Monte Carlo simulation to demonstrate the possiblilty of the proposed method. The reconstructed image qualities were quantitatively evaluated in sense of the root mean square error (RMSE) and the peak signal-to-noise ratio (PSNR). Our simulation results indicate that the proposed method provides more accurate location information of the simulated gamma source than the CC-based method.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.6
• /
• pp.1-7
• /
• 2011

The depth camera measures range information of the scene in real time using Time-of-Flight (TOF) technology. Measured depth data is then regularized and provided as a depth image. This depth image is utilized with the stereo or multi-view image to generate high-resolution depth map of the scene. However, it is required to correct noise and distortion of TOF depth image due to the technical limitation of the TOF depth camera. The corrected depth image is combined with the color image in various methods, and then we obtain the high-resolution depth of the scene. In this paper, we introduce the principal and various techniques of sensor fusion for high-quality depth generation that uses multiple camera with depth cameras.

• Ocean and Polar Research
• /
• v.24 no.3
• /
• pp.263-266
• /
• 2002

Gravity waves have been searched for with a new all-sky camera system over Korean Peninsular. The all-sky camera consists of a 37mm/F4.5 Mamiya fisheye lens with a 180 dog field of view, interference filters and a 1024 by 1024 CCD camera. The all-sky camera has been tested near Daejeon city, and moved to Mt. Bohyun where the largest astronomical telescope is operated in Korea. A clear wave pattern was successfully detected in OH filter images over Mt. Bohyun on July 18, 2001, indicating that small scale coherent gravity waves perturbed OH airglow near the mesopause. Other wave features are since then observed with Na 589.8nm and OI 630.0nm filters. Since a Japanese all-sky camera network has already detected traveling ionospheric disturbances (TID) over the northeast-southwest range of Japanese islands, we hope our all-sky camera extends the coverage of the TID's observations to the west direction. We plan to operate our all-sky camera all year around to study seasonal variation of wave activities over the mid-latitude upper atmosphere.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12C
• /
• pp.1154-1166
• /
• 2009

In this paper, we propose algorithms for generating high quality virtual intermediate views on the baseline or out of baseline. In this proposed algorithm, depth information as well as 3D warping technique is used to generate the virtual views. The coordinate of real 3D image is calculated from the depth information and geometrical characteristics of camera and the calculated 3D coordinate is projected to the 2D plane at arbitrary camera position and results in 2D virtual view image. Through the experiments, we could show that the generated virtual view image on the baseline by the proposed algorithm has better PSNR at least by 0.5dB and we also could cover the occluded regions more efficiently for the generated virtual view image out of baseline by the proposed algorithm.