• Archives of Plastic Surgery
• /
• v.38 no.3
• /
• pp.222-227
• /
• 2011

Purpose: Autogenous particulate bone grafting is a type of autogenous bone graft that consists of small particles of cortical and cancellous bone. Autogenous particulate bone grafting has been used for calvarial bone defect after calvarial defect of craniosynostosis and prevention of temporal depression after fronto-orbital advancement. The results were followed up and studied for effectiveness of autogenous calvarial particulate bone grafting. Methods: Cranial vault remodeling and fronto-orbital advancement was performed for six craniosynostosis patient from August 2005 to October 2007. Autogenous particulate bone grafting was harvested from endocortex of separated cranial vault and if insufficient, from extocortex of occipital region using Hudson brace & D'Errico craniotomy bit and was grafted on the calvarial bone defect of cranial vault and temporal hollow. Fibrin glues were added to the harvested particulated bone for adherence and shaping of paticles. Results: Autogenous particulate bone grafting was followed-up at least longer than I year. The calvarial bony defects following primary cranial remodeling were successfully covered and postoperative temporal depressions after fronto-orbital advancement were also well prevented by grafted particulated bone. Conclusion: Autogenous calvarial particulate bone graft can be harvested in infants and young children with minimal donor site morbidity. It effectively heals cranial defects in children and during fronto-orbital advancement reduces the prevalence of osseous defects independent of patient age. It's easy and effective method of reconstruction of calvarial defect.

• Archives of Plastic Surgery
• /
• v.32 no.4
• /
• pp.467-473
• /
• 2005

Calvarial bone grafting in craniomaxillofacial trauma and facial reconstructive surgery is now widely recognized and accepted as a standard procedure. One of the commonly reported problems of calvarial bone graft is the contour defect caused by partial resorption of the graft. But, there are few reports that discuss the fate of the calvarial bone graft based on the quantitative data. In this article, the changes of grafted calvarial bone were evaluated using 3-dimensional computed tomography(CT). 9 patients were observed with the CT scans at 2mm thickness immediately after operation and at the time of last follow-up. The area of the bone defect was segmented on the 3-dimensional CT image and calculated by AnalyzeDirect 5.0 software. The immediate postoperative bone defect area of the recipient site and the donor site were $612.9mm^2$ and $441.5mm^2$, respectively, which became $1028.1mm^2$ and $268.8mm^2$, respectively at the last follow-up. In conclusion, the bone defect area was less increased on the donor site of calvarial bone graft than on the recipient site. And the CT scan is a valuable imaging method to assess and follow-up the clinical outcome of calvarial bone grafting.

• Archives of Craniofacial Surgery
• /
• v.16 no.1
• /
• pp.11-16
• /
• 2015

Background: Source material used to fill calvarial defects includes autologous bones and synthetic alternatives. While autologous bone is preferable to synthetic material, autologous reconstruction is not always feasible due to defect size, unacceptable donor-site morbidity, and other issues. Today, advanced three-dimensional (3D) printing techniques allow for fabrication of titanium implants customized to the exact need of individual patients with calvarial defects. In this report, we present three cases of calvarial reconstructions using 3D-printed porous titanium implants. Methods: From 2013 through 2014, three calvarial defects were repaired using custom-made 3D porous titanium implants. The defects were due either to traumatic subdural hematoma or to meningioma and were located in parieto-occipital, fronto-temporo-parietal, and parieto-temporal areas. The implants were prepared using individual 3D computed tomography (CT) data, Mimics software, and an electron beam melting machine. For each patient, several designs of the implant were evaluated against 3D-printed skull models. All three cases had a custom-made 3D porous titanium implant laid on the defect and rigid fixation was done with 8 mm screws. Results: The custom-made 3D implants fit each patient's skull defect precisely without any dead space. The operative site healed without any specific complications. Postoperative CTs revealed the implants to be in correct position. Conclusion: An autologous graft is not a feasible option in the reconstruction of large calvarial defects. Ideally, synthetic materials for calvarial reconstruction should be easily applicable, durable, and strong. In these aspects, a 3D titanium implant can be an optimal source material in calvarial reconstruction.

• Archives of Craniofacial Surgery
• /
• v.12 no.2
• /
• pp.107-110
• /
• 2011

Purpose: There have been few case reports regarding treatment plans for long-term, neglected scalp defects and calvarial defects with subdural abscess. The purpose of this case report is to present our experience with a free latissimus dorsi musculocutaneous flap for scalp and calvarial defects and to discuss flap options in comparison with a literature review. Methods: A 60-year-old man who fell down from a four-story-height that resulted in a craniotomy in 1979; he visited our outpatient clinic for a chronic, purulent scalp and calvarial defects with unidentified artificial bone. The artificial bone was removed by a neurosurgeon and reconstructed with a free latissimus dorsi musculocutaneous flap. The deep temporal artery was used as a recipient artery. The postoperative flap status was excellent until the 6th day post-operation when the patient experienced a seizure, and an arterial insufficiency occurred at the flap probably due to an arterial spasm. Emergency exploration with arterial re-anastomosis was performed and the flap status was stabilized. Results: Complete wound healing was achieved after 3 weeks without infectious and systemic postoperative complications. During the 6 month follow-up period, there were no complications. Conclusion: We suggest the latissimus dorsi myocutaneous free flap as a good treatment option for a chronic, purulent, complicated scalp with calvarial defect, as a well as treatment for an acute traumatic defect.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.35 no.1
• /
• pp.13-17
• /
• 2013

Purpose: This study evaluated the capability of bone formation of silk fibroin particles coated with hydroxyapatites (HA/SF), as bone graft material when put into the calvarial defect of rats. Methods: Twenty Sprague Dawley rats were used for this study and round shaped defects were formed in the center of parietal bones (diameter: 8.0 mm). The defect was filled with (1) HA/SF (experimental group), or (2) left as a vacant space (control group). The animals were sacrificed at 4 or 8 weeks, postoperatively. The specimens were decalcified and stained with Masson's trichrome for histomorphometric analysis. Results: The average of new bone formation was $33.18{\pm}3.10%$ in the experimental group and $20.49{\pm}5.79%$ in the control group at 4 weeks postoperatively. That was $42.52{\pm}7.74%$ in the experimental group and $25.50{\pm}7.31%$ in the control group at 8 weeks postoperatively. The difference between the groups was significantly higher at both 4 weeks and 8 weeks postoperatively (P<0.05). Conclusion: The rat calvarial defect was successfully repaired by HA/SF graft. The HA/SF graft showed more new bone formation compared with the unfilled control.

• Archives of Plastic Surgery
• /
• v.34 no.5
• /
• pp.667-670
• /
• 2007

Purpose: Among the materials for cranioplasty, autogenous bone is ideal because it is less susceptible to infection and has lower rates of subsequent exposure. However, the procedure is technically demanding to perform and requires a donor site. Disadvantages further exist when the defect is large and there are attendant limitations in donor site. The authors present their experience with reconstruction of large skull defect using right-angled zigzag osteotomized outer table of autogenous calvarial bone, overcoming the limitation in donor site. Methods: From 2000 to 2006, 9 patients were retrospectively reviewed, who had undergone reconstruction with right angled zigzag osteotomized outer table of autogenous calvarial bone. Results: Aesthetically satisfactory skull shape was achieved. Major complications of infection, hematoma, plate exposure, and donor site complications of dural tear with bleeding, cerebrospinal fluid leak, and meningitis were not seen. One patient had delayed wound healing and was successfully managed conservatively. Conclusion: Autogenous bone is the material of choice for cranioplasty, especially in complicated cases. Right angled zigzag osteotomy is a useful method in reconstruction of large skull defects with less donor site morbidity.

• Journal of Periodontal and Implant Science
• /
• v.32 no.4
• /
• pp.753-767
• /
• 2002

The purpose of this study was to evaluate histologically the effect of LiF-maleic acid added calcium aluminate(LM-CA) bone cement & CA-PMMA composite bone cement on the healing of calvarial defect in Sprague-Dawley rats. The critical size defects were surgically produced in the calvarial bone using the 8mm trephine bur. The rats were divided in three groups : In the control group, nothing was applied into the defect of each rat. LM-CA bone cement was implanted in the experimental group 1 and CA-PMMA composite bone cement was implanted in the experimental group 2. Rats were sacrificed at 2, 8 weeks after surgical procedure. The specimens were examined by histologic analysis, especially about the bone-cement interface and the response of surrounding tissue. The results are as follows; 1. In the control group, inflammatory infiltration was observed at 2 weeks. At 8 weeks, periosteum and duramater were continuously joined together in the defect area. But the center of defect area was filled up with the loose connective tissue. 2. In the experimental group 1, the bonding between implanted bone cement and the existing bone was seen, which more increased in 8 weeks than 2 weeks. Inflammatory infiltration and the dispersion of implanted bone cement particles were seen in both 2 weeks and 8 weeks. 3. In the experimental group 2, implanted bone itself had a dimensional stability and no bonding between implanted bone cement and the existing bone was seen in both 2 weeks and 8 weeks. Implanted bone cement was encapsulated by fibrous connective tissue. In addition, inflammatory infiltration was seen around implanted bone cement. On the basis of these results, when LM-CA bone cement or CA-PMMA composite bone cement was implanted in rat calvarial defect, LM-CA bone cement can be used as a bioactive bone graft material due to ability of bonding to the existing bone and CA-PMMA can be used as a graft material for augmentation of bone-volume due to dimensional stability.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.28 no.4
• /
• pp.264-273
• /
• 2002

Pulsed electromagnetic field (PEMF) was used first to induce osteogenesis in 1974. The appliance which was consisted of the Helmholtz coil configuration have used to osteogensis. The objective of this study was to determine whether PEMF, a frequency of 100 Hz and magnetic field strength of 38 gauss applied to the calvarial defect in rabbit, could affect the induction of osteogenesis and the healing of the graft bone. This field should not produce excitation of nerve or muscle and heating the tissue. To evaluate the effect of PEMF on osteogenesis, 16 rabbit under the same condition was divided into 8 experimental groups and 8 control groups. 10 mm calvarial bone defects were formed around sagittal suture. The defect of left side was left without graft while the defect of right side was grafted by bone harvested from left side. A pulsed electromagnetic field was applied for 8 hours per day. Each group was sacrificed after 1 week, 2 weeks, 4 weeks, 8 weeks. Microscopic specimens were obtained from the calvarial bone defects and surrounding tissue using Hematoxylin-Eosin staining method. The results were as follows. 1. In the group which pulsed electromagnetic field was applied, new bone formation filled up the defect was observed after 4 and 8 weeks effectively. 2. There are no difference in the healing period for the fusion between the bone and graft bone. According to the result, the PEMF with 38 Gauss, 100 Hz was very effective in the healing of bone defect and new bone formation. So The PEMF will be useful in clinical aspect for oseteogenesis.

• Archives of Plastic Surgery
• /
• v.32 no.1
• /
• pp.24-28
• /
• 2005

Skull or facial bone defect causes cosmetic and functional problems. On going efforts were taken to reconstruct the craniofacial bone defect with autogenous bone or alloplastic materials. Between 2001 and 2003, we reconstructed 15 cases with small to large craniofacial bone defect using Hydroxyapatite paste($BoneSource^{(R)}$, Leibinger Corp., Dallas, TX, U.S.A) and calvarial bone graft. All patients were followed up by clinical examination and periodic radiographic studies for an average of 1.6 years (range, 6 months to 2 years and 6 months). One complication case was noted with $BoneSource^{(R)}$ exposure. Otherwise, there was no evidence of adverse healing, wound infection, foreign body reaction and seroma collection in other patients. Adequate 3-dimensional aesthetic restoration of calvarial contour was noted in each case. In conclusion, $Bonesource^{(R)}$ is relatively safe and rigid material for craniofacial bone defect and reasonable method for the reconstruction of craniofacial bone defects.

• Journal of Periodontal and Implant Science
• /
• v.34 no.3
• /
• pp.475-487
• /
• 2004

Purpose: This study was aimed to evaluate the effect of the deproteinated bovine bone powder (DBBP) coated with calcium phosphate (Ca-P) on osseous regeneration in the calvarial bone defect of rat. Materials and Methods : The DBBP (Control group, n=6) and the Ca-P coated DBBP (Experimental group, n=6) were grafted in the critical sized calvarial bone defect (8 mm) of rat weighing 250 g. The animals were sacrificed at 1, 4 week. The biopsy specimens were decalcified with 5%formaldehyde and embedded in paraffin. The rats were sacrificed at 8 week received tetracycline (1 week), calcein blue (4 week), and alizarin red (7 week), and the biopsy specimens were taken. The specimens were embedded in methylmethacrylate and ground to 10 ${\mu}m$ thin sections were made. All of the specimens were stained with H & E and Masson's trichrome and examined under light microscope. The specimens at 8 week were examined under fluorescent microscope. Results : In the Control group, the grafted DBBP was surrounded with connective tissue, and osteoblasts were observed partially around the grafted particles at 1 week. At 4 week, some osteoid was observed and, new bone formation was observed at the periphery of grafted materials at 8 week, In the Experimental group, some osteoid was seen at the periphery of the grafted Ca-P coated DBBP at 1 week, and osteoblast and newly formed bone were observed around the grafted materials. At 8 week, newly formed bone was observed at the periphery of the grafted materials. Conclusion: These results suggest that Ca-P coated DBBP group was more and faster than DBBP group in new bone formation and Ca-P could contribute to enhance bone formation in the critical sized calvarial bone defect of rat.