• 한국식품영양학회지
• /
• 제36권6호
• /
• pp.581-587
• /
• 2023

Brown rice has various health benefits; however, it is more difficult to cook and has a harder texture as compared to milled rice. In this study, the effect of the sous-vide cooking method on starch retrogradation and textural properties of brown rice was investigated by comparative analysis with conventionally cooked brown rice based on moisture content assay, evaluation of the textural property analysis, and differential scanning calorimetry (DSC). The results of the study are as follows: First, the moisture content of sous-vide cooked brown rice was higher than in the conventionally cooked brown rice. Second, the sous-vide cooked brown rice has lower hardness, higher adhesiveness, and lower retrogradation enthalpy during storage than conventionally cooked brown rice. Finally, the retrogradation properties of cooked brown rice during storage were analyzed by DSC. The enthalpy increased more rapidly in the case of conventional cooked brown rice, reaching 1.58 J/g after 3 days of storage. This indicated that sous-vide cooking is effective in preventing retrogradation of rice during storage.

• Asian-Australasian Journal of Animal Sciences
• /
• 제27권2호
• /
• pp.209-216
• /
• 2014

The present study was conducted to estimate the NE values of corn, dried distillers grains with solubles (DDGS) and wheat bran (WB) for laying hens based on an indirect calorimetry method and nitrogen balance measurements. A total of 576 twenty-eight-wk-old Dwarf Pink-shell laying hens were randomly assigned to four groups fed a basal diet (BD) or a combination of BD with 50% corn or 20% DDGS or 20% WB, with four replicates each. After a 7-d adaptation period, each replicate with 36 hens were kept in one of the two respiration chambers to measure the heat production (HP) for 6 days during the feeding period and subsequent 3-d fasting. The equilibrium fasting HP (FHP) provided an estimate of NE requirements for maintenance (NEm). The NE values of test feedstuffs was estimated using the difference method. Results showed that the heat increment that contributed 35.34 to 37.85% of ME intake was not influenced by experimental diets (p>0.05) when expressed as Mcal/kg of DM feed intake. Lighting increased the HP in hens in an fed-state. The FHP decreased over time (p<0.05) with the lowest value determined on the third day of starvation. No significant difference between treatments was found on FHP of d 3 (p>0.05). The estimated AME, AMEn, and NE values were 3.46, 3.44 and 2.25 Mcal/kg DM for corn, 3.11, 2.79, and 1.80 Mcal/kg DM for DDGS, 2.14, 2.10, and 1.14 Mcal/kg DM for WB, respectively. The net availability of AME of corn tended to be numerically higher than DDGS and WB (p = 0.096). In conclusion, compared with corn, the energy values of DDGS and WB were overestimated when expressed on an AME basis.

• 한국식품과학회지
• /
• 제31권1호
• /
• pp.24-29
• /
• 1999

새로운 저열량 감미료인 tagatose를 식품에 적용하기 위해 여러 가지 이화학적 특성을 조사하였다. Tagatose 용액은 Bingham 유체의 점성 특성을 보여주었고 용액의 농도가 $25^{\circ}C$에서 10%에서 50%로 증가할수록 점도가 1.65 cp에서 5.14 cp로 증가하여 비교적 저 점도를 보여주었다. 또한, 온도가 $15^{\circ}C$에서 $55^{\circ}C$로 증가함에 따라 점도가 4.59 cp에서 2.33 cp로 감소함을 보여주었다. Differential scanning calorimetry에 의하여 용융 특성을 조사한 결과 tagatose의 용융 개시 온도는 $130.4^{\circ}C$, 흡열 엔탈피는 -202.3 J/g이었다. 수분활성도는 60% 농도에서 tagatose는 0.892, sucrose는 0.957로 tagatose가 더 낮은 수분활성도를 보여주었다. 흡습성은 상대습도 85%에서 100%까지 tagatose가 sucrose보다 높았다. $20^{\circ}C$에서 $70^{\circ}C$까지의 온도 변화에 따른 용해도를 보았을 때는 tagatose가 sucrose보다 낮았다. pH 2에서 pH 12까지 조정한 용액을 3일 후 관찰하였는데 pH에 대하여 안정하였다. 또한 $154^{\circ}C$까지 4시간 열처리하였을 때 거의 변성이 되지 않았다. 그러나 높은 온도에서 열처리를 한 경우 육안으로 보이는 갈변화에 의하여 흡광도가 증가하는 것으로 나타났다.

• 대한치과보철학회지
• /
• 제44권6호
• /
• pp.690-698
• /
• 2006

Statement of problems. The heat produced during polymerization of polymer-based provisional materials may cause thermal damage to the vital pulp. Purpose. This study was performed to evaluate the exotherm reaction of the polymerbased provisional materials during polymerization by differential scanning calorimetry and to compare the temperature changes of different types of resins. Material and methods. Three dimethacrylate-based materials (Protemp 3 Garant, Luxatemp Plus, Luxatemp Fluorescence) and five monomethacrylate- based material (Snap, Alike, Unifast TRAD, Duralay, Jet) were selected. Temperature changes of polymer-based provisional materials during polymerization in this study were evaluated by D.S.C Q-1000 (TA Instrument, Wilmington, DE, USA). The following three measurements were determined from the temperature versus time plot: (1) peak temperature, (2) time to reach peak temperature, (3) heat capacity. The data were statistically analyzed using one-way ANOVA and multiple comparison Bonferroni test at the significance level of 0.05. Results. The mean peak temperature was $39.5^{\circ}C({\pm}\;1.0)$. The peak temperature of the polymer-based provisional materials decreased in the following order: Duralay > Unifast TRAD, Alike > Jet > Luxatemp Plus, Protemp 3 Garant, Snap, Luxatemp Fluorescence. The mean time to reach peak temperature was 95.95 sec $({\pm}\;64.0)$. The mean time to reach peak temperature of the polymer-based provisional materials decreased in the following order: Snap, Jet > Duralay > Alike > Unifast TRAD > Luxatemp Plus, Protemp 3 Garant, Luxatemp Fluorescence. The mean heat capacity was 287.2 J/g $({\pm}\;107.68)$. The heat capacity of the polymer-based provisional materials decreased in the following order: Duralay > TRAD, Jet, Alike > Snap, Luxatemp Fluorescence, Protemp 3 Garant, Luxatemp Plus. Conclusion. The heat capacity of materials, determined by D.S.C., is a factor in determining the thermal insulating properties of restorative materials. The peak temperature of PMMA was significantly higher than others (PEMA, dimethacrylate). No significant differences were found among PEMA (Snap) and dimethacrylate (P >0.05). The time to reach peak temperature was greatest with PEMA, followed by PMMA and dimethacrylate. The heat capacity of PMMA was significantly higher than others (PEMA, dimethacrylate). No significant differences were found among PEMA and dimethacrylate (P >0.05).

• 한국식품과학회지
• /
• 제25권1호
• /
• pp.22-27
• /
• 1993

보리를 thermostable ${\alpha}-amylase$와 amyloglucosidase로 처리하여 ${\beta}-glucan$을 얻은 후 정제과정을 통해 순수한 ${\beta}-glucan$을 얻어 보리 ${\beta}-glucan$의 열적특성을 연구하여 다음과 같은 결과를 얻었다. 보리${\beta}-glucan$의 DSC thermogram은 3개의 흡열곡선을 나타냈으며 1차 흡열곡선은 겔화상전이 현상을 나타냈다. 보리 ${\beta}-glucan$의 농도가 증가함에 따라 겔화 온도범위와 엔탈피가 최대값을 나타냈으며 4 g/dl ${\beta}-glucan$의 To, Tp 및 Tc는 각각 $48.8^{\circ}C,\;61.2^{\circ}C$ 및 $78.5^{\circ}C$였고 엔탈피는 0.23 ca1/g이었다. pH 의존성에서 pH 7일 때 겔화온도의 범위가 넓었고 엔탈피도 가장 컸으며 산성과 알칼리성이 강할수록 낮은 값을 나타냈다. 염농도 의존성에서는 염을 가하지 않았을 때 겔화 온도범위와 엔탈피가 높았고 염을 첨가했을 경우 엔탈피는 급격히 감소하였으며 Tp와 Tc는 저온으로 이동되었으나 염농도 증가에는 영향을 받지 않았다. 보리 ${\beta}-glucan$의 열적특성에서 urea는 겔형성을 촉진시키는 active-reagent이었고 glycerol은 inactive-reagent임이 확인되었다. 열분해 현상에서 보리 ${\beta}-glucan$의 "true melting" 온도는 $184^{\circ}C$ 였고 엔탈피는 34.6 cal/g이었으며 분해온도는 $316^{\circ}C{\sim}346^{\circ}C$ 범위로 열에 대해 매우 안정한 물질임을 알 수 있었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제26권4호
• /
• pp.558-563
• /
• 2013

The present study was conducted to estimate energy requirements for maintenance in laying hens by using indirect calorimetry and energy balance. A total of 576 28-wk-old Nongda-3 laying hens with dwarf gene were randomly allocated into four ME intake levels (86.57, 124.45, 166.63 and 197.20 kcal/kg body weight $(BW)^{0.75}$ per d) with four replicates each. After a 4 d adaptation period, 36 hens from one replicate were maintained in one of the two respiration chambers to measure the heat production (HP) for 3 d during the feeding period and subsequent 3 d fast. Metabolizable energy (ME) intake was partitioned between heat increment (HI), HP associated with activity, fasting HP (FHP) and retained energy (RE). The equilibrium FHP may provide an estimate of NE requirements for maintenance (NEm). Results showed that HP, HI and RE in the fed state increased with ME intake level (p<0.05). Based on the regression of HP on ME intake, the estimated ME requirements for maintenance (MEm) was 113.09 kcal/kg $BW^{0.75}$ per d when ME intake equals HP. The FHP was decreased day by day with the lowest value on the third day of starvation. Except for lowest ME intake level, the FHP increased with ME intake level on the first day of starvation (p<0.05). The FHP at the two higher ME intake levels were greater than that at the two lower ME intake levels (p<0.05) but no difference was found between the two lower ME intake levels. Linear regression of HP from the fed state to zero ME intake yielded a value of 71.02 kcal/kg $BW^{0.75}$ per d, which is higher than the extrapolated FHP at zero ME intake (60.78, 65.23 and 62.14 kcal/kg $BW^{0.75}$ per d for the first, second and third day of fasting, respectively). Fasting time, lighting schedules, calculation methods and duration of adaptation of hens to changes in ME intake level should be properly established when using indirect calorimetry technique to estimate dietary NE content, MEm and NEm for laying hens.

• 한국수산과학회지
• /
• 제26권3호
• /
• pp.230-234
• /
• 1993

어육연제품의 제조시 가열에 의한 gel화 및 물성을 연구하기 위하여 differential scanning calorimetry(DSC)와 thermal gravimetric analyzer(TGA)에 의한 gel중의 물의 거동에 대해서 관찰한 결과를 요약하면 다음과 같다. DSC에 의한 물의 거동을 살펴본 결과, $105^{\circ}C$를 경계로 하여 속박상태가 다른 2가지의 물이 존재함을 알 수 있었으며, $R_{105}$값과 gel강도 간에는 높은 상관관계 (r=0.93)가 있었다. TGA에 의한 gel중의 물의 거동을 해석한 결과, 증발속도에 기인하는 3가지 상태의 물이 존재하였으며, 증발속도가 낮은(강하게 속박된) 물과 gel강도 간에는 아주 높은 상관관계(r=0.99)가 있었다. 이상의 결과로 미루어 보아 물의 존재상태와 물성 간에는 아주 깊은 상관성이 있어 물의 존재상태를 측정함으로써 그 물성을 예견할 수 있을 뿐만 아니라 보수력도 동시에 측정할 수가 있으므로TGA에 의한 해석은 어육 연제품의 물성을 연구하는 경우에 아주 유용한 수단으로 생각되었다.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 The Korea-Japan Joint Symposium
• /
• pp.67-68
• /
• 2003

Native corn starch and montmorillonite caly nanocomposites were prepared using the glycerol as the plasticizer. These were characterized by mechanical analysis, X-ray diffraction, infrared spectroscopy, differential scanning calorimetry, and scanning electron microscopy. The tensile strength increased with the clay content to a maximum point and then decreased due to gapping between the two phases. Dispersion of the layered silicate within the starch was verified using X-ray diffraction pattern. Examination of these materials by scanning electron showed that intercalates have good wetting to the starch surface.

• Journal of Pharmaceutical Investigation
• /
• 제39권2호
• /
• pp.117-120
• /
• 2009

Two crystal forms of ziprasidone have been isolated by recrystallization from different organic solvents and characterized by differential scanning calorimetry, powder X-ray diffractometry and thermogravimetric analysis. It was confirmed that Form 2 has the same crystal structure as Form 1.

• Archives of Pharmacal Research
• /
• 제28권6호
• /
• pp.730-735
• /
• 2005

Nine polymorphic modifications of doxazosin mesylate have been obtained by recrystallization in organic solvents under variable conditions. Different polymorphs of doxazosin mesylate were characterized by powder X-ray crystallography diffractometry (PXRD), differential scanning calorimetry (DSC), and thermogravimetric analysis (TG). Transformation of Form 1 and Form 2 was not occurred in three relative humidities ($0\%$, $51\%$, and $99\%$) at 20$\pm$0.5 for 30 days.