• 생명과학회지
• /
• 제11권2호
• /
• pp.138-143
• /
• 2001

Marsh calm(Corbicular elatior)with a short-term storage in raw and a law-rate of utilization has been increasing the needs to develop new marsh calm processing products for a temporary mass treatment and long-term distribution, Therefore the processing conditions of marsh calm beverage using proteolytic enzyme hydrolysis were investigated. A partial hydrolysis at 6$0^{\circ}C$ for 1 hour after adding 3% Alcalase as more effective than a hot water extraction to develop taste compounds from the marsh calm. The result of ommission test showed that nucleotides and their related compounds were contributed in the taste of the marsh calm hydrolysates rather than free amino acids. The taste of the hydrolysates was produced by association with these compounds rather than only one compound s the hydrolystes taste differently for the control when one of these compound was omitted. The hydrolysates were fractionated to molecular weight below 500 dalton to eliminate bitter taste and to improve it flavor from the hydrolysates, 0.05% bay leaf was more effective to improve the odor than other herbs.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권2호
• /
• pp.723-735
• /
• 2019

This paper employs computational tools to investigate the cause of resistance reductions in calm water and waves of the sharp bow form compared to the blunt bow in 66,000 DWT bulk carriers. A more slender shape at the fore-shoulder without a bulbous bow is a prominent feature of the sharp bow. The blunt bow incorporates a bulbous shape. A two-phase unsteady Reynolds averaged Navier-Stokes equations have been solved; and a realizable k-ε model has been applied for the turbulent closure. The free-surface is obtained by solving a VOF equation. The computational results have been validated with model tests carried out at a towing tank. The pressure component of resistance in the sharp bow is reduced by 8.9% in calm water, and 6.4-12.7% in regular head waves. The frictional components of resistance in the sharp and blunt bows are largely the same.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권5호
• /
• pp.499-508
• /
• 2017

This paper uses optimization techniques to obtain bow hull form of a 66,000 DWT bulk carrier in calm water and in waves. Parametric modification functions of SAC and section shape of DLWL are used for hull form variation. Multi-objective functions are applied to minimize the wave-making resistance in calm water and added resistance in regular head wave of ${\lambda}/L=0.5$. WAVIS version 1.3 is used to obtain wave-making resistance. The modified Fujii and Takahashi's formula is applied to obtain the added resistance in short wave. The PSO algorithm is employed for the optimization technique. The resistance and motion characteristics in calm water and regular and irregular head waves of the three hull forms are compared. It has been shown that the optimal brings 13.2% reduction in the wave-making resistance and 13.8% reduction in the added resistance at ${\lambda}/L=0.5$; and the mean added resistance reduces by 9.5% at sea state 5.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.278-291
• /
• 2021

This paper applies load variation method to predict speed-power-rpm relationship along with propulsive performances in regular head waves, and to derive overload factors (ITTC, 2018). 'Calm-water tests' and 'resistance test in waves' are used. The modified overload factors are proposed taking non-linearity into consideration, and applied to the direct powering, and resistance and thrust identity method. These indirect methods are evaluated through comparing the speed-power-rpm relationships with those obtained from the resistance and self-propulsion tests in calm water and in waves. The objective ship is KVLCC2. The load variation method predicts well the speed-power-rpm relationship and propulsion performances in waves. The direct powering method with modified overload factors also predicts well. The resistance and thrust identity method with modified overload factor predicts with a little difference. The direct powering method with overload factors predicts with a relatively larger difference.

• 한국식품영양학회지
• /
• 제13권6호
• /
• pp.529-533
• /
• 2000

본 실험에서는 재첩가공에 관한 기초자료를 제시할 목적으로, 제첩국 제조시 가열시간에 따른 맛 성분의 조성변화에 관해 실험하였다. 재첩국은 원료 중량 당 2배량의 끓는 물을 가하여 0, 5, 10, 30, 60및 120분간 가열하였다. 가열시간이 증가함에 따라 수분함량은 감소하였으며, 단백질함량은 점차로 증가하였다. 가열 시간 30분에서 유리아미노산의 함량은 103.10 mg/100 g으로 가장 높게 나타났으며, 30분 이후부터는 서서히 감소하였다. 유리아미노산 함량은 alanine의 함량이 가장 높았으며, 그 다음으로 proline, glutamic acid 및 glycine의 순이었다. 재첩국의 단백질 가수분해도는 가열시간 증가함에 따라 높게 나타났다. 비휘발성 유기산 함량은 succinic acid 함량이 가열시간 30분에서 137.08 mg/100 g으로 가장 높게 나타났으며, 그 다음은 oxalic aicd, magic aicd 및 lactic acid 순이었다. 따라서 재첩국 제조시 최적 가열시간은 30분이었다.

• Journal of Ship and Ocean Technology
• /
• 제3권2호
• /
• pp.17-26
• /
• 1999

An experimental investigation on hydrodynamic forces acting on a porpoising craft at high advanced speeds up to Froude numbers Fn=6.0(Fn=U\ulcorner:Lo\ulcorner denote overall length of ship) in calm water is performed. Captive model tests and forced motion tests are carried out to measure the hydrodynamic forces. The results show that significant nonlinear effects for motion amplitudes appear in the restoring, the added mass and the damping coefficients. The experimental results are compared with the results of a prediction method of the hydrodynamic forces include the nonlinear effects, and show a good agreement with them. A simulation using the predicted hydrodynamic forces in a nonlinear motion equation is carried out to obtain the porpoising motion of a craft in calm water. The calculated results are in fairly good agreement with experimental ones.

• 대한조선학회논문집
• /
• 제37권1호
• /
• pp.1-9
• /
• 2000

3톤급 소형어선의 나선, 빌지킬 및 중앙날개(central wing)가 부착된 상태의 3가지 모델에 대해 평수중에서 속도 변화, 초기각의 변화 및 OG(무게중심과 횡동요 중심간의 거리)의 변화에 따른 횡동요 감쇠시험에 의해 감쇠특성을 비교하였다. 또한 에너지법에 의해 선형 및 비선형속도항에 의존하는 횡동요 감쇠모멘트를 수식화하여 시험값과 비교하였으며 3가지 모델에 대한 에너지 발산 형태도 비교하였다.

• Ocean Systems Engineering
• /
• 제7권4호
• /
• pp.371-398
• /
• 2017

Calm water wave resistance plays a very important role in ship hull design. Numerical methods are meaningful for this reason. In this study, two prevailing methods, the Neumann-Kelvin and the Rankine source method, were implemented and compared. The Neumann-Kelvin method assumes linearized free surface boundary condition and only needs to mesh the hull surface. The Rankine source method considers nonlinear free surface boundary condition and meshes both the ship hull surface and free surface. Both methods were implemented and the wave resistance of a Wigley III and three Series 60(Cb=0.6, 0.7, 0.8) hulls were analyzed. The results were compared with experimental results and the merits of both numerical techniques were quantified. Based on the results, it is concluded that the Rankine source method is more accurate in the calculation of the wave-making resistance. Using the Neumann-Kelvin method, it is found to be easier to model the hull and can be used for slender ships to solve problems like wave current coupling calculation.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권5호
• /
• pp.442-455
• /
• 2016

The resistance and seakeeping performance of a high-speed monohull vessel were investigated through a series of model tests in a towing tank. The hull had a slender wave-piercing bow, round bilge, and small deadrise angle on stern. Tests on the bare hull in calm water were first conducted and tests on spray rails followed. The spray rails were designed to control the flow direction and induce a hydrodynamic lift force on the hull bottom to reduce trim angle and increase rise of the hull. The maximum trim of the bare hull was $4.65^{\circ}$ at the designed speed, but the spray rails at optimum location reduced trim by $0.97^{\circ}$. The ship motion in head seas was examined after the calm water tests. Attaching the rails on the optimum location effectively reduced the pitch and heave motion responses. The vertical acceleration at the fore perpendicular reduced by 11.3%. The effective power in full scale was extrapolated from the model test results and it was revealed that the spray rails did not have any negative effects on the resistance performance of the hull, while they effectively stabilized the vessel in calm water and waves.

• 대한조선학회논문집
• /
• 제51권5호
• /
• pp.369-379
• /
• 2014

Planing hull forms have significant influences on those hydrodynamic performances in calm water and in waves. Therefore, the hydrodynamic performance of a planing vessel should be predicted by model tests or theoretical calculations, and be confirmed whether it shows the performance requirements at the design stage. In this study, four planing hull forms are designed with the goal of the improvement of resistance and seakeeping performance, and 1/6.5 scale model tests are carried out in Seoul National University towing tank. The effects of design parameters such as length-to-beam ratio, deadrise angle and forebody shape on the hydrodynamic performance are investigated, based on model test results. Running attitude and resistance of model ships in calm water are also estimated by empirical formulae proposed by Savitsky (1964; 2007; 2012), and compared with the model test results. It is shown that calm water performance of non-prismatic planing hulls can be predicted well by Savitsky (2012)'s formula which improves the original Savitsky(1964/2007)'s formula by taking into account the variations of deadrise angles, and the actual angles between the hull bottom and the free surface.