• Proceedings of the Korean Institute of Interior Design Conference
• /
• 1999.04a
• /
• pp.45-48
• /
• 1999

The objective of this study is to introduce the spatial characteristics and the better arrangement of waiting areas in general hospital on comprehensing the patient's behavior as patient call-system and spatial characteristics is characteristics is changed. That is for improvement in the circumstance of waiting area more important than before, and for the patient satisfaction and patient's affirmative judgement of hospital quality by offering the convenience. Through this study, the way of improvement for waiting area can be suggested such as the beeper system, the restructuring of program information, the multiple aim space without hospital program, the reform of the seat's arrayal, the waiting area with conveniency.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.10a
• /
• pp.363-368
• /
• 2004

Due to various advantages over the conventional linear motion device such as ball-screw, linear motors have been used in wide variety of industrial applications for years. Driven by increased demand for precision machine tools, the importance of high positioning accuracy, high stiffness and high thrust are greatly increasing. The merits of linear motor are high speed, high acceleration and good positioning accurcy. In addition, Linear motor for high quality machine tool call for high thrust, high stiffness. In this paper, thrust ripple, detent force and thermal behavior are considered for the development of high performance linear motor whose thrust is up to 10,000N. This paper presents a comprehensive study for an iron core type linear motor characteristics that include the influence of PM position on thrust, thrust ripple by detent force and motor dynamics as well.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1010-1015
• /
• 2008

The rapid wear rate of cutting tools due to high cutting temperature is a critical problem to be solved in machining of hardened steel. Application of cutting fluid influences the performance of machining because of its lubrication and cooling actions. But, the environmental concerns call for the reduced use of cutting fluids in machining operations. Near-dry machining such as minimum quantity lubrication is regarded as one of the solutions to this difficulty. In the present work, cutting fluid was applied as a high velocity jet at the machining zone continuously at an extreme low rate using a fluid application system developed namely Electro Static Lubrication (ESL) during drilling of hardened steel. The performance of ESL has been compared with that of dry and MQL (minimum quantity lubrication) machining.

• Journal of Computing Science and Engineering
• /
• v.4 no.2
• /
• pp.153-172
• /
• 2010

Wireless mobile multimedia communications have been greatly increased in the number of users, diversity of applications and interface technologies. Wireless mobile networks are being evolved and integrated into IP based core network, so it is necessary to provide sufficient QoS (Quality of Service) mechanism to provide enhanced user's satisfaction. In this paper, we propose a new adaptive QoS mechanism based on utility function borrowed from the field of microeconomics, call setup and handover signaling mechanism integrating QoS and mobility management. Through a simulation, we show that adaptive resource allocation based on user preferences can be realized in the wireless mobile network with some considerations.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.05a
• /
• pp.111-115
• /
• 2008

The productivity is the one of the primary elements to evaluate the new systems performance for building construction along with the economic efficiency, the safety, and the quality improvement. At present the on-site construction automation systems(we will call it as Construction Factory or CF hereafter) is under the development by research group for construction automation of high-rise building. The system includes many sub-systems such as a robotic crane, a construction factory, bolting robots, a building material management system using RFID and so on. In this study we discuss and propose the method to evaluate for these hybrid on-site automation system fundamentally. In future we devise a framework of evaluation modules for the on-site building automation system on the basis of this discuss.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.4
• /
• pp.1175-1183
• /
• 2000

Base on the development of mobile communication, the future mobile communication systems were expected to provide higher quality of multimedia services for users than today's systems. Therefore, many technical factors are needed in this systems. Especially these secrecy and the safety would be obtained through the introduction of the security for mobile communication. In this paper, we presents weaknesses and propose required properties in mobile communication. Based on those proposed properties, we propose a new 'call set-up' and 'hand-off' protocol for authentication and key distribution. Also we compare between the proposed scheme and conventional schemes.

• Journal of Korean Society of Transportation
• /
• v.13 no.1
• /
• pp.83-94
• /
• 1995

Many taxis called "Mobum" in Seoul are empty and waiting along the curb during the day time. However, it is almost impossible for elderly and handicapped people, and women carrying babies to use them .It is because they can not serve passengers who request services by phone. If taxis, expecially "Mobum" taxis which offer high quality services, can be dispatched based on requests by phone, not only elderly and handicapped people but also auto commuters will easily call and use them. This paper shows a taxi dispatching system. The system minimizes the total empty vehicle hours under given number of empty vehicles and passengers and their locations. As a result, the system maximizes number of services and revenue under given number of taxis. The system adopts a well -known linear programming model and the model can fast and easily be solved by PC level linear programming packages. Also, practical solutions of the system's constraints such as size and travel time forecast are discussed.ecast are discussed.

• Proceedings of the Safety Management and Science Conference
• /
• 2000.11a
• /
• pp.131-134
• /
• 2000

Broadband networks are designed to support a wide variety of services with different traffic characteristics and demands for Quality of Services. Bandwidth allocation methods can be classified into two major categories: static and dynamic. In static allocation, bandwidth is allocated only at call setup time and the allocated bandwidth is maintained during a session. In dynamic allocation, the allocated bandwidth is negotiated during a session. The purpose of this paper is to develop policies for deciding and for adjusting the amount of bandwidth requested for a best effort connection over such as ATM networks. This method is to develop such policies that a good trade off between utilization and latency using cell delay variation to the forecast the incoming traffic in the next period. The performances of the different polices are compared by simulations.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.25 no.1
• /
• pp.85-92
• /
• 2000

Channel management is critical in designing a cellular mobile system that offers high capacity and high quality. In this paper, an integrated channel management scheme is proposed, which consists of a dynamic channel allocation scheme and an admission control scheme. The dynamic channel allocation scheme allocates a call request the channel which minimizes the impact on its interfering cell, and consists of two types of channel allocation strategies : nominal channel allocation strategy and non-nominal channel allocation strategy. The admission control scheme named the variable cutoff priority scheme reserves some frequency channels for handoff cells in each cell the number of which varies according to the blocking probability of handoff class in that cell. Computationl tests are performed to evaluate the performance of the proposed scheme in terms of overall blocking probability, defined by the weighted value of the blocking probabilities of new calls and handoff calls. The results show that the proposed scheme yields better performance than other compared schemes.

• Industry Promotion Research
• /
• v.1 no.1
• /
• pp.151-157
• /
• 2016

Nowadays Chinese society advocates a kind of principal thinking, which Chinese call it "harmony". The entire Chinese society is trying to build a so-called "harmonious society", that is, people live in harmony with the natural environment and carry out sustainable development; people live in harmony with others and build harmonious social relationships; people live in harmony with themselves and cultivate self-morality and enhance national self-quality. It can be seen that the word "harmony" runs through this thinking all the time. This paper aims at viewing Chinese people's philosophy in Ming Dynasty from the Piaohailu. Likewise, the starting points of the paper are also these three aspects which are people's relationships with nature, others and themselves. Based on this angle, it tries to conduct a simple analysis and study by taking Korean official Cui Pu's Piaohailu as the main historical data.