• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(II)
• /
• pp.483-488
• /
• 2003

Calibration and gauge factor readjustment process made for the health monitoring system installed in the railway bridges is reviewed and some findings are explained in this study: specifically, the calibrators made for this purpose are illustrated and the regression processes of the calibration on long-term displacement using water level sensor, longitudinal displacement using LVDT sensor, instantaneous displacement using LVDT sensors and accelerometer are described in details. Based on the regression results, new gauge factors are obtained from regression equation and another verification is made by performing another calibration again with new factors. From the second calibration, it was found that the suggested regression curves and their factors are appropriate and much better results are expected. Future work will be concentrated on the long-term analysis of the measurement data and on the database structures so that the assessment of the structure such as damage detection and remaining life estimation is possible.

• 한국도로학회논문집
• /
• 제8권3호
• /
• pp.155-162
• /
• 2006

시험도로 줄눈 콘크리트포장에 대하여 48시간 동안 시간에 따른 처짐의 변화를 측정하였고 이를 이용하여 컬링거동의 보정방안을 도출하였다. 임의 시간 슬래브의 중앙 처짐/줄눈 처짐이 임의 시간 중앙 처짐/기준 시간 중앙 처짐 사이의 관계를 회귀분석을 통해서 얻어내었다. 임의시간에 측정된 처짐으로부터 하루 가운데 최소 처짐이 나타나는 기준시간 처짐으로의 변환은 회귀곡선을 통해 추정 하였고 데이터 축적을 통해 컬링거동 보정 방안의 하나로 제시 할 수 있을 것으로 판단되었다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제12권3호
• /
• pp.1-6
• /
• 2010

Since the fiber reinforced polymeric (FRP) composites are considered in next generation of space transportation systems, reliable thermal expansion properties should be well provided for structural design of composite materials. To obtain accurate mechanical behaviors at a cryogenic temperature, precise strain measurement and calibration must be provided. In this work, apparent strains (or thermal output) of temperature self-compensated strain gages were deliberately investigated for epoxy, CTBN modified epoxy and carbon fabric composite system from room temperature to liquid nitrogen temperature. Also, fourth-order thermal output curves were presented for the further calibration. The results showed that the thermal output is heavily dependent on test materials and a large amount of apparent strains were observed for the polymer resins.

• 한국대기환경학회지
• /
• 제27권2호
• /
• pp.133-141
• /
• 2011

In this study, different calibration approaches for reduced sulfur compounds (RSCs) were investigated by using thermal desorption coupled with gas chromatography (GC) and pulsed flame photometric detection (PFPD). To evaluate the effects of calibration procedures, gaseous standards of 4 RSCs ($H_2S$, $CH_3SH$, DMS, and DMDS) prepared at 10 ppm level were analyzed at 7 loading injection volumes (40, 60, 80, 100, 160, 240, and 320 ${\mu}L$). The results were then compared with calibration curves made with the Z (zero offset) and N (non-zero offset) method. The concentrations of unknown samples were then quantified by using R (ratio) method in which the slope values are compared between standards and samples. Secondly, in A (average) method, results obtained from a multi-point analysis of unknown samples were also averaged to extract representative values for each sample. Results of both experiments showed that analytical error of low molecular weight components (such as $H_2S$ and $CH_3SH$) was greatly expanded with the Z method. In conclusion, the combined application of N-A method was the more realistic approach to reduce biases in the quantification of RSCs.

• 한국산학기술학회논문지
• /
• 제4권3호
• /
• pp.177-182
• /
• 2003

Flash memory는 device 특성상 peripheral circuit을 구성하는 transistor의 종류가 다양하고, 이에 따른 각 transistor의 동작 전압 영역이 넓다. 이에 따라 설계 초기의 전기적 특성 사양 결정을 위해서는, 실리콘상에서 소자의 scale down에 따른 전기적 특성을 선 검증하는 과정이 필수적이었으며, 이로 인해 설계 및 소자 개발의 기간을 단축하기 어려웠다. 본 연구에서는 TCAD tool을 사용하여 실리콘상에서의 제작 공정을 거치지 않고, 효과적으로 model parameter를 생성할 수 있도록 하는 방법을 제안하여 전기적 특성 사양 결정과 설계 단계의 시간 지연을 감소할 수 있도록 한다. 또한 성공적 TCAD tool적용을 위해 필요한 process/device simulator의 calibration methodology와 이를 flash 메모리 소자에 대해 적용 검증한 결과를 분석한다.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제5C권1호
• /
• pp.14-17
• /
• 2005

In this paper, an automated methodology for generating model parameters considering real manufacturing processes is presented with verified results. In addition, the outcomes of applications to the next generation of flash memory devices using the parameters calibrated from the process specification decision are analyzed. The test vehicle is replaced with a well-calibrated TCAD simulation. First, the calibration methodology is introduced and tested for a flash memory device. The calibration errors are less than 5% of a full chip operation, which is acceptable to designers. The results of the calibration are then used to predict the I-V curves and the model parameters of various transistors for the design of flash devices.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2006년도 학술논문요약집
• /
• pp.251-252
• /
• 2006

• 한국환경과학회지
• /
• 제4권1호
• /
• pp.91-103
• /
• 1995

The reaction rate, equilibrium, and flow injection analysis methods were fundamentally evaluated for the determination of aqueous ammonia. The selected indophenol blue method was based on the formation of indophenol blue in which ammonium ion reacted with hypochlorite and phenol in alkaline solution. In the optimized reaction condition, the reaction followed 1st order reaction kinetics and the final product was stable. The absorbance measurements before and after the equilibrium were utilized for the reaction rate and equilibrium methods. The reaction rate methods, based on the relative analytical signals for the possibility of eliminating interferents, were shown to have good linear calibration curves but the detection limit and the calibration sensitivity were poorer than those in the equilibrium method. The detection limits were 32-49 pub and 24 pub for the reaction rate and equilibrium methods, respectively In the flow injection analysis, the absorbance was measured before the equilibrium reached and thus resulted in 30% reduction of calibration sensitivity. However, the detection limit was 11 ppb, indicating that the peak-to-peak noise for the blank was remarkably improved. Compared to the manual methods, the optimized experimental condition in a closed reaction system reduced the blank absorbance and the inclusion of ammonia from the atmosphere was prevented. In addition, highly reproducible mixing of sample and reagents and analytical data extracted from continuous recording showed excellent reproducibility.

• Journal of Preventive Medicine and Public Health
• /
• 제38권3호
• /
• pp.276-282
• /
• 2005

Objectives : To evaluate the predictive validity of three scoring systems; the acute physiology and chronic health evaluation(APACHE) III, simplified acute physiology score(SAPS) II, and mortality probability model(MPM) II systems in critically ill patients. Methods : A concurrent and retrospective study conducted by collecting data on consecutive patients admitted to the intensive care unit(ICU) including surgical, medical and coronary care unit between January 1, 2004, and March 31, 2004. Data were collected on 348 patients consecutively admitted to the ICU(aged 16 years or older, no transfer, ICU stay at least 8 hours). Three models were analyzed using logistic regression. Discrimination was assessed using receiver operating characteristic(ROC) curves, sensitivity, specificity, and correct classification rate. Calibration was assessed using the Lemeshow-Hosmer goodness of fit H-statistic. Results : For the APACHE III, SAPS II and MPM II systems, the area under the receiver operating characterist ic(ROC) curves were 0.981, 0.978, and 0.941 respectively. With a predicted risk of 0.5, the sensitivities for the APACHE III, SAPS II, and MPM II systems were 81.1, 79.2 and 71.7%, the specificities 98.3, 98.6, and 98.3%, and the correct classification rates 95.7, 95.7, and 94.3%, respectively. The SAPS II and APACHE III systems showed good calibrations(chi-squared H=2.5838 p=0.9577 for SAPS II, and chi-squared H=4.3761 p=0.8217 for APACHE III). Conclusions : The APACHE III and SAPS II systems have excellent powers of mortality prediction, and calibration, and can be useful tools for the quality assessment of intensive care units(ICUs).

• 대한공간정보학회지
• /
• 제23권3호
• /
• pp.3-10
• /
• 2015

지상의 모든 물체는 고유의 분광 반사율을 갖고 있으며, 이러한 특성을 이용하여 지상 물체의 분류와 목표물 탐지 등이 가능하다. 정확한 분석을 위해서는 취득된 원격탐사 자료를 분광 반사율로 변환해야 한다. 이를 위한 절대복사보정 기법으로는 자료 제공 기관에서 명시한 변환 수식을 이용하는 방법, 지상에서 측정한 분광 반사율만으로 단순 경험적 회귀 분석을 이용하는 방법, ATCOR/FLAASH 같은 수학적 모델을 이용하는 방법 등이 있다. 본 연구에서는 CASI 초분광 영상의 분광 반사율 자료를 이용하여 RapidEye 위성영상의 대리복사보정을 수행하고, 그 결과를 다른 복사보정 기법 결과 및 지상 자료와 비교하였다. 실험 결과 제안 기법이 ATCOR 및 New Kurucz 2005 기법보다 높은 유사성을 보였으며, 일반적으로 활용되는 ELM 기법과 유사한 결과를 도출하였다.