• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.12
• /
• pp.2255-2262
• /
• 2008

This paper presents a design parameter calculation methodology and its realization to construction for the damped oscillatory impulse current generator(ICG) modelled as damping factor $\alpha$. Matlab internal functions, "fzero" and "polyfit" are applied to find a which are solutions of second order nonlinear equation related with three wave parameters $T_{1},T_{2}$ and $I_{os}$. The calculation results for standard impulse current waveforms such as 4/10${\mu}s$, 8/20${\mu}s$ and 30/80${\mu}s$ show very good accuracy and this results make it possible to extend to generalization in the design of damped oscillatory lCG with any capacitor. 8/20${\mu}s$ ICG based on the calculated design circuit parameters is fabricated in consideration of the nonlinear load(MOV) variation. Comparisons of the tested waveforms with the designed estimation show error within 10% for the waveform tolerance recommended in IEC 60060-1 and IEEE std. C62.45.

• Journal of the Korean Solar Energy Society
• /
• v.28 no.2
• /
• pp.10-18
• /
• 2008

This study aims to figure out typical meteorological data according to Korean time in order to evaluate building energy performance. Various methods of calculating typical meteorological data were compared and examined to improve accuracy and reliability of this study. This study analyzed and examined such methodologies as typical meteorological data for HASP/ACLD-8001, UK CIBSE TRY developed by CIBSE and prEN ISO 15927-4, (=ISO TRY) an international standard to evaluate annual energy demand of cooling and heating devices. In addition, actual data of KMA corresponding to Seoul in $1985{\sim}2005$ were statistically analyzed according to calculation methodology. The calculated typical meteorological data were compared te actual data using MBE, RMSE and t-Statistic. As a result, According to the comparison between average annual for HASP/ACLD-8001 and ISO TRY standard year, the average annual for HASP/ACLD-8001 is closer to actual measurement, showing that the use of typical meteorological data for HASP/ACLD-8001 is preferred. However, since the input format requested by current simulation is the same international standard as TRY. Therefore, it is necessary to improve accuracy of TRY calculation methodology and accordingly figure out Korean typical meteorological data based on average year.

• Journal of Distribution Science
• /
• v.18 no.12
• /
• pp.67-77
• /
• 2020

Purpose: Based on the author's adapted invariant choice, this study is to present the methodology and the calculation of the integral index of the digital component of the quality of life. By analyzing the digital indexes, the study is also to discuss distribution of ICT and the digital quality of life of the population of Kazakhstan and its regions. Research design, data, methodology: In this research, the method of calculation of integral assessment of the indicator was used, which indicates index constructs. The study analyzed objective secondary data for the period 2017-2019, which was the database from official websites of the Committee on Statistics of the Republic of Kazakhstan. Results: The study produced an integral code for assessing digital components of living standards of the population, consisting of five groups sub-indexes. Conclusions: Based on the provided analyses, we can confirm the existence of a significant difference of all the indicators of digital living standards of the population between the two leading cities: Almaty city and Nur-Sultan city. Furthermore we can deduce the differences of the examined indexes for other regions of Kazakhstan. Despite the rapid adoption of digital technologies, Kazakhstan still has significant digital gaps among cities indicating regional differences in the speed of implementation and distribution of digital technologies.

• Journal of Korean Society of Rural Planning
• /
• v.15 no.2
• /
• pp.27-42
• /
• 2009

This study has intended to evaluate the subjective landscape of rural region using additive integration index calculation model in Seondong region, Gochang-gun, Jeollabuk-do, Korea. This study consists of the following three steps. First, this study defmed the rural landscape using survey and developed the estimating equation for rural landscape assessment index. Second, this study set up assessment units and assessment indicators, then estimated mean of representative landscape adjectives in accordance with them through residents-participatory evaluation. Third, this study calculated rural landscape assessment index using additive integration index calculation model, and evaluated subjective landscape of rural region in accordance with space types and landscape fields through mapping methodology. The results of this study can be described as follows: 1) satisfaction level for landscape in accordance with village (urban area and residential area) was very high; 2) satisfaction level was very high in both Ye-Jeon reservoir and Hakwon farm, representative landscape resources of the study area.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.21 no.1
• /
• pp.149-164
• /
• 2023

As part of the safety case development for generic disposal sites in Korea, it is necessary to develop generic assessment models using various geosphere-biosphere interfaces (GBIs) and potentially exposed groups (PEGs) that reflect the natural environmental characteristics and the lifestyles of people in Korea. In this study, a unique modeling strategy was developed to systematically construct and select Korean generic biosphere assessment models. The strategy includes three process steps (combination, screening, and experts' scoring) for the biosphere system conditions. First, various conditions, such as climate, topography, GBIs, and PEGs, were combined in the biosphere system. Second, the combined calculation cases were configured into interrelation matrices to screen out some calculation cases that were highly unlikely or less significant in terms of the exposure dose. Finally, the selected calculation cases were prioritized based on expert judgment by scoring the knowledge, probability, and importance. The results of this study can be implemented in the development of biosphere assessment models for Korean generic sites. It is believed that this systematic methodology for selecting the candidate calculation cases can contribute to increasing the confidence of future site-specific biosphere assessment models.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.2
• /
• pp.107-112
• /
• 2015

Carbon emissions in construction stage is very high because lots of construction machines and materials are required to be used at a road construction stage. Many researcher carried out application of carbon emissions estimation methodology during the life cycle of road infrastructure in order to reduce greenhouse gas emissions in the road sector. But the calculation of carbon emissions is difficult because data collection is difficult and calculation procedure is complex. In this study, a basic unit of carbon emissions in construction stage of the road infrastructure was developed in order to get the quantitative determination of carbon that occurs. Carbon emissions of the expressway and common state road was calculated by using the basic unit of carbon emissions and application plan of basic unit of carbon emissions are presented.

• Journal of KIBIM
• /
• v.14 no.2
• /
• pp.25-34
• /
• 2024

This study proposes a new methodology to increase the flexibility and efficiency of the design data evaluation system by combining Building Information Modeling (BIM) technology in the architectural industry, OpenAI's interactive artificial intelligence, and ChatGPT. BIM technology plays an important role in digitally modeling and managing architectural information. Since architectural information is included, research and development are underway to review and evaluate BIM data according to conditions through program development. However, in the process of reviewing BIM design data, if the review criteria or evaluation criteria according to design change occur frequently, it is necessary to update the program anew. In order for designers or reviewers to apply the changed criteria, requesting a program developer will delay time. This problem was studied by using ChatGPT to modify and update the design data evaluation program code in real time. In this study, it is aimed to improve the changing standards and accuracy by enabling programming non-professionals to change the design regulations and calculation standards of the BIM evaluation program system using ChatGPT. In this study, in the BIM-based design certification automation evaluation program, a program in which the automation evaluation method is being studied based on the design certification evaluation manual was first used. In the design certification automation evaluation program, the programming non-majors checked the automation evaluation code by linking ChatGPT, and the changed calculation criteria were created and modified interactively. As a result of the evaluation, the change in the calculation standard was explained to ChatGPT and the applied result was confirmed.

• Journal of Digital Convergence
• /
• v.13 no.12
• /
• pp.381-390
• /
• 2015

One of the fundamental requirements of entertainment applications is interactivity with users. The mobile device such as the smartphone, however, does not guarantee it due to the limit of the application processor's computing power, memory size and available electric power of the battery. This paper proposes a methodology to boost responsiveness of interactive applications by taking advantage of the parallel architecture of mobile devices which, for instance, have dual-core, quad-core or octa-core. To harness the multi-core architecture, it exploits the POSIX thread, a platform-independent thread library to be able to be used in various mobile platforms such as Android, iOS, etc. As a useful application example of the methodology, a heavy matrix calculation function was transformed to a parallelized version which showed around 2.5 ~ 3 times faster than the original version in a real-world usage environment.

• Asia-Pacific Journal of Business
• /
• v.14 no.2
• /
• pp.101-118
• /
• 2023

Purpose - The purpose of this study is to find out how a company can do reasonable cost calculations in a simple way and establish profitability improvement strategies based on the results. Design/methodology/approach - In this study, a case that compounding company K applied TDABC was studied. A case study was conducted on the process of company K reviewing and applying TDABC and the process of implementing the cost calculation for each product by applying TDABC, and establishing a profitability improvement strategy for each product based on the results. Findings - Company K rearranged the production standard information of the compounding industry such as productivity and batch size of each product to apply TDABC. Cost calculation was performed for each product according to the revised production standard information. After the cost calculation for each product was carried out, Company K established a strategy to improve profitability of each product. The profitability improvement strategy was implemented in two ways: a cost reduction strategy and a product price increase strategy. As a result of the final strategy execution, the profitability of each product was improved. Research implications or Originality - This study found a reasonable costing standard in consideration of the specificity of the research target company, and applied it to cost calculation cost for each product. It contains the process of establishing production and sales strategies for each product based on the cost calculation results. It is expected that this case study will serve as a good reference material for establishing cost calculation and profitability improvement strategies in similar businesses.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.10a
• /
• pp.226-229
• /
• 2008

Hot press forming is an advanced forming technology fur manufacturing of complex and crash-resistant automotive parts using ultra high strength steels. The 3-dimensional FE analysis of hot press forming process, in which process the deformation, heat transfer and phase transformation behavior are fully coupled, is carried out. The vast amount of material properties for the FE analysis is obtained from material properties calculation software which is based on thermodynamic calculations. The overall methodology for the FE analysis of HPF process and the analysis results are discussed here.