• 한국전자통신학회논문지
• /
• 제16권2호
• /
• pp.293-300
• /
• 2021

본 연구에서는 SCDF를 사용하여 전력공급의 가치를 산정하고, 부하점별 중요도를 다면적인 평가를 하는 방법을 제시한다. 이의 방법으로 지속정전, 순간정전, 전압 Sag/Swell에 대응할 수 있는 SCDF를 제공하고, 이 SCDF를 사용하여 정전과 관련하여 어느 부하점에 어느 정도의 비용이 발생하는지를 계산하였으며, 이들 비용을 다면평가를 통해 어느 부분이 어느정도 취약한지를 평가하고 어느 부분의 확장이 필요한 지를 수치적으로 설명할 수 있도록 하였다. 본 연구를 우리나라의 실배전계통에 적용하여 평가하고 유용성을 검증하였다.

• 예술인문사회 융합 멀티미디어 논문지
• /
• 제7권12호
• /
• pp.101-110
• /
• 2017

2016년 통계청의 자료에 따르면 법인의 직무발명 비중이 늘어나고 있음에도 불구하고, 정당한 직무발명보상을 실시하지 않는 기업은 56.9%나 되는 것으로 집계되었다. 하나의 원인은 객관적인 특허 기여율 산출 방식과 정당한 보상의 명확한 기준이 정립되지 못했기 때문이다. 본 연구에서는 정당한 직무발명 보상금 산정을 위해 DCF (Discounted cash flow)와 AHP (Analytical hiearchy process) 방법론을 활용한 새로운 특허 기여율 산출 방식을 제시하고 이를 활용하여 실제 사례를 통해 검증하였다. 그 결과 기존 판례의 보상금 산정보다 2.3배 높은 금액이 산정되었으며 이는 정당한 보상금 산정에 있어 명확한 기준이 정립되지 않아 발명자 보호에 매우 미흡한 현 상황에서 조금 더 발명자를 보호할 수 있는 객관적인 보상금 산정 기준을 제시하고 있다는 점에서 의의가 있다. 본 방법론은 계산방법과 절차가 단순하여 중소기업을 위한 직무발명 보상 기법으로 활용 가능할 것으로 기대한다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2001년도 춘계학술발표회요약집
• /
• pp.352.2-352
• /
• 2001

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2002년도 춘계공동학술발표회요약집
• /
• pp.105.2-105
• /
• 2002

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2002년도 춘계공동학술발표회요약집
• /
• pp.106.1-106
• /
• 2002

• 한국수자원학회논문집
• /
• 제30권4호
• /
• pp.357-366
• /
• 1997

3차원 수치고도지도 및 TIN모듈을 이용하여 SCS법에 의한 유효강우량 산정방법을 제안하였다.유역사면경사 $10^{\circ}$ 증가에 대한 유출곡선지수의 증분치(2%, 3%)를 고려하여 유효강우량을 산정한 결과, 호우사상에 따라 약 5.90%~12.0%의 차이를 나타내었다. 따라서 우리나라 대부분의 하천유역과 같ㅇ. 고도차가 큰 일반 산지하천유역에서 SCS법에 의한 유효강우량 산정시에는 유역사면경사를 고려한 해석이 보다 합리적인 것으로 판단되었다.

• Corrosion Science and Technology
• /
• 제12권3호
• /
• pp.132-141
• /
• 2013

This work is concerning a methodology of Ni-base superalloy development for a very high temperature gas-cooled reactor(VHTR) using design of experiments(DOE) and thermodynamic calculations. Total 32 sets of the Ni-base superalloys with various chemical compositions were formulated based on a fractional factorial design of DOE, and the thermodynamic stability of topologically close-packed(TCP) phases of those alloys was calculated by using the THERMO-CALC software. From the statistical evaluation of the effect of the chemical composition on the formation of TCP phase up to a temperature of 950 oC, which should be suppressed for prolonged service life when it used as the structural components of VHTR, 16 sets were selected for further calculation of the mechanical properties. Considering the yield and ultimate tensile strengths of the selected alloys estimated by using the JMATPRO software, the optimized chemical composition of the alloys for VHTR application, especially intermediate heat exchanger, was proposed for a succeeding experimental study.

• 한국기술혁신학회:학술대회논문집
• /
• 한국기술혁신학회 2004년도 춘계학술대회
• /
• pp.25-36
• /
• 2004

The key objective of this paper is to suggest a pilot model for mobile network interconnection charge calculation by bottom-up long-run incremental costing methodology. Interconnection issues have lately attracted considerable attention by network operators and regulators. However there is no standard by all the network operators' agreement. The costing method is an acute problem because the interconnection charge is directly related to the network operators' revenue. Thus Korea has planned to launch the new interconnection policy based on the current traffic distribution and then we simulate the model in a sample area with virtual data. The results propose objective and reasonable guideline for the mobile network element cost calculation. It can be helpful for calculating price floor or bottom-up long run incremental interconnection charge by regulator.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권5호
• /
• pp.920-938
• /
• 2015

In the present study, a numerical prediction method on the hydrodynamic interaction force and moment between two ships in shallow and restricted waterway is presented. Especially, the present study proposes a methodology to overcome the limitation of the two dimensional perturbation method which is related to the moored-passing ship interaction. The validation study was performed and compared with the experiment, firstly. Afterward, in order to propose a methodology in terms with the moored-passing ship interaction, further studies were performed for the moored-passing ship case with a Reynolds Averaged Navier-Stokes (RANS) calculation which is using OpenFOAM with Arbitrary Coupled Mesh Interface (ACMI) technique and compared with the experiment result. Finally, the present study proposes a guide to apply the two dimensional perturbation method to the moored-passing ship interaction. In addition, it presents a possibility that the RANS calculation with ACMI can applied to the ship-ship interaction without using a overset moving grid technique.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(2)
• /
• pp.513-518
• /
• 1996

This report presents a demonstration of application of realistic evaluation methodology to a posturated cold leg large break LOCA in a Westinghouse three-loop pressurized water reactor with 17$\times$17 fuel. The new method of this analysis can be divided into three distinct step: 1) Best Estimate Code Validation and Uncertainty Quantification 2) Realistic LOCA Calculation 3) Limiting Value LOCA Calculation and Uncertainty Combination RELAP5/MOD3/K ［1］, which was improved from RELAP5/MOD3.1, and CONTEMPT4/MOD5 code were used as a best estimate thermal-hydraulic model for realistic LOCA calculation. The code uncertainties which will be determined in step 1) were quantified already in previous study ［2］, and thus the step 2) and 3) for plant application were presented in this paper. The application uncertainty parameters are divided into two categories, i.e. plant system parameters and fuel statistical parameters. Single parameter sensitivity calculations were performed to select system parameters which would be set at their limiting value in Limiting Value Approach (LVA) calculation. Single run of LVA calculation generated 27 PCT data according to the various combinations of fuel parameters and these data provided input to response surface generation. The probability distribution function was generated from Monte Carlo sampling of a response surface and the upper 95$^{th}$ percentile PCT was determined. Break spectrum analysis was also made to determine the critical break size. The results show that sufficient LOCA margin can be obtained for the demonstration NPP.