• 한국지반환경공학회 논문집
• /
• 제9권5호
• /
• pp.71-81
• /
• 2008

본 논문에서는 지표면 경사각, 벽면 경사각, 벽면 마찰각, 선하중, 등분포하중, 점착력, 부착력의 영향을 고려할 수 있는 주동토압공식을 힘의 평형이론을 근거로 도출하였다. 이 제안식의 정확성을 검증하기 위하여, 도해법에 의해 산정된 토압과 비교하였으며, Coulomb, Rankine, Mazindrani 공식에 의한 산정 결과와도 비교하였다. 산정 결과는 도해법 결과뿐만 아니라 Coulomb, Rankine, Mazindrani 공식의 3가지 방법에 의한 결과와 잘 일치되었다. 또한, 제안식에 의한 주동토압은 Fang 등의 실험연구 결과와 일치하는 경향을 나타내었다. 이 일반화된 공식은 Coulomb, Rankine, Mazindrani 의 주동토압공식의 한계를 극복할 수 있을 뿐만 아니라 외부하중조건을 고려할 수 있는 것으로 평가되었다.

• 화약ㆍ발파
• /
• 제33권4호
• /
• pp.14-24
• /
• 2015

근접발파진동이 흙막이 안정성에 미치는 영향을 알아보기 위해 3개 현장에서 시험발파를 시행하였다. 시험결과 동일거리의 지중에서 측정된 진동은 지표에서 측정된 진동의 10~52% 수준으로 작아 어스앵커 정착장 등 지중에 설치된 구조물은 지표에 있는 구조물에 비해 상대적으로 발파진동에 안전함을 확인하였다. 측정된 3개 현장의 지표 및 지중진동 PPV를 통합 회귀분석하여 진동추정식을 도출하였으며, 이를 활용 지중 및 지표에서 양생중인 콘크리트에 대해 양생시간별 허용진동기준을 만족하는 발파패턴별 최소이격거리를 산정하였다. 근거리 발파진동 측정, 흙막이 계측치 변화 확인, 구조물 변형여부 육안관찰을 통해 확인한 결과 특별히 흙막이 안정성에 불리한 불연속면이 발달하지 않는 한 지발당장약량 2.4kg 이하의 발파작업은 흙막이 안정성에 유의미한 영향을 미치지 않는 것으로 판단된다.

• 대한원격탐사학회지
• /
• 제37권1호
• /
• pp.161-167
• /
• 2021

This paper presents the method to quantitatively evaluate the uncertainty of the semi-empirical Bidirectional Reflectance Distribution Function (BRDF) model for Himawari-8/AHI. The uncertainty of BRDF modeling was affected by various issues such as assumption of model and number of observations, thus, it is difficult that evaluating the performance of BRDF modeling using simple uncertainty equations. Therefore, in this paper, Monte-Carlo method, which is most dependable method to analyze dynamic complex systems through iterative simulation, was used. The 1,000 input datasets for analyzing the uncertainty of BRDF modeling were generated using the Second Simulation of a Satellite Signal in the Solar Spectrum (6S) Radiative Transfer Model (RTM) simulation with MODerate Resolution Imaging Spectroradiometer (MODIS) BRDF product. Then, we randomly selected data according to the number of observations from 4 to 35 in the input dataset and performed BRDF modeling using them. Finally, the uncertainty was calculated by comparing reproduced surface reflectance through the BRDF model and simulated surface reflectance using 6S RTM and expressed as bias and root-mean-square-error (RMSE). The bias was negative for all observations and channels, but was very small within 0.01. RMSE showed a tendency to decrease as the number of observations increased, and showed a stable value within 0.05 in all channels. In addition, our results show that when the viewing zenith angle is 40° or more, the RMSE tends to increase slightly. This information can be utilized in the uncertainty analysis of subsequently retrieved geophysical variables.

• 한국지반공학회논문집
• /
• 제25권2호
• /
• pp.5-15
• /
• 2009

기존의 블록식 보강토옹벽의 경우 블록과 보강재 연결을 핀, 커텍터 등으로 연결하므로 전면부에 응력집중이 발생하여 블록의 균열이나 보강재 파단파괴가 발생할 수 있는 단점이 있다. 이에 본 연구는 보강재의 침하를 허용하는 새로운 연결시스템을 개발하여 연구대상지역에 일반형 블록식 보강토옹벽 구간과 보강재 침하형 보강토옹벽 구간으로 나누어 시험시공을 실시하였다. 시공과정 및 이후의 현장계측결과 전면블록에 인접한 부분에서 최대인장력으로부터 구한 인장력비가 일반형 보다 침하형이 전면블록 전면부의 음력집중이 크게 감소하는 것으로 나타났다.

• 한국지반공학회논문집
• /
• 제32권10호
• /
• pp.41-53
• /
• 2016

토사층 하부에 절리암반층이 존재하는 복합지반을 굴착하고 설치하는 흙막이 구조물의 안정성은 배면에 작용하는 토압에 의해 결정된다. 보통 복합지반에서는 암반층을 토사로 간주하고 암반층의 지반강도 정수를 적용하여 경험적으로 토압을 구하는데, 암반층의 불연속면을 고려하지 않기 때문에 대개 실제 작용 토압보다 작게 산정된다. 본 연구에서는 복합지반에서 토사층과 암반층의 구성비율 및 암반층의 절리경사에 따라 흙막이 벽체에 작용하는 토압의 크기와 분포형태를 규명고자 대형토조(높이 3.0m, 길이 3.0m 폭 0.5m)에서 축척 1/14.5로 2차원 대형 모형실험을 수행하고, 같은 조건으로 수치해석을 수행하였다. 실험지반은 토사층과 암반층의 분포비가 각각 65%:35%와 50%:50%가 되도록 조성하였고, 암반층의 절리는 굴착측으로 $0^{\circ}$, $30^{\circ}$, $45^{\circ}$, $60^{\circ}$ 각도로 구성하였다. 그 결과 흙막이 벽체에 작용하는 토압은 암반층 절리 경사각(J)이 커질수록 증가 하였으며, 암반층비율이 증가함에 따라 암반층에 작용하는 토압도 증가하였다. 암반층에 작용하는 토압은 암반층의 비가 50%(R50)이고, 암반층의 절리 경사각이 $60^{\circ}$일 때 가장 크게 발생하였다. 대형모형실험과 수치해석 결과를 바탕으로 임의 복합지반을 굴착할 때 발생하는 토압을, 최상단 버팀대토압과 최대토압 및 굴착하단을 꼭짓점으로 하는 사각형분포로 이상화하고, 암반층비율과 절리경사각도를 고려하여 토압을 구할 수 있는 토압식을 제안하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.741-744
• /
• 2005

A numerical scattering model for artificial metal structure based on physical optics approximation is developed to identify the height of phase center, and the result is compared with interferometric SAR DEM. The interferometric SAR data were gathered by AIRSAR during PACRIM- II campaign on Jeju Island. Power transmission towers on piedmont pasture along the slopes of Mt. Halla look like elliptic risings in TOPSAR DEM. The heights of risings are quantitatively analyzed using a scattering model in the way of achieving the height of phase centers of power transmission towers. A numerical algorithm is developed on the basis of physical optics approximation. The structure of power transmission tower was decomposed into hundreds of rectangular metal plates, of which the scattering matrix is known in analytic form, and the calculated scattering fields were summed coherently. The effect of direct backscattering component, ground-scatterer component and scatterer-ground component are decomposed and computed individually for each rectangular metal plate. The $\Deltak-radar$ equivalent was used to calculate height of phase center of the scatterer. The heights of a selected power transmission tower and scattering algorithm results give existence and location of the transmission towers but not actual tower heights.

• 대기
• /
• 제23권1호
• /
• pp.23-32
• /
• 2013

Ensemble sensitivity has been recently proposed as a method to analyze the dynamics of severe weather events. We adopt it to investigate the physical mechanism which caused the heavy rainfall over the Korean Peninsula on 6th August 2003. Two rainfall peaks existed in this severe weather event. The selected response functions are 1 hour accumulated rainfall amount of each rainfall peak. Sensitivity fields were calculated using 36 ensemble members which were generated by WRFDA. The sensitive regions for the first rainfall peak are located over the Shandong Peninsula and the Yellow Sea at 12 hours before the first rainfall peak. However, the 12-h forecast sensitivity for the second rainfall peak is revealed near Typhoon ETAU (0310) and midlatitude trough. These results show that the first rainfall peak was induced by low pressure which located over the northern part of the Korean Peninsula while the second rainfall peak was caused by the interaction between typhoon ETAU and midlatitude trough.

• Journal of Positioning, Navigation, and Timing
• /
• 제6권2호
• /
• pp.71-78
• /
• 2017

The sidereal day of a Global Positioning System (GPS) satellite was intended to equal one half of a sidereal day of the Earth. However, the sidereal day of GPS satellites has become unequal to one half of a sidereal day of the Earth. This is fundamentally caused by the non-sphericity of the Earth and the gravity of the Moon. The difference between sidereal days of GPS satellites and the Earth is known as a sidereal shift. The details surrounding sidereal shifts and their origins have yet to be fully understood. We calculated the periodicity of sidereal shifts for GPS satellites using broadcast ephemeris data. To conduct a periodic analysis of the sidereal shift, we employ the Lomb-Scargle periodogram method. It shows that the orbit periods of GPS satellites have small-amplitude perturbations with a 13.6-day period. In addition, we compare the GPS satellite orbit periods with the periodicity of geomagnetic indices and the solar wind parameters to identify the cause of the perturbations. Our results suggest that the solar wind stream might also affect the 13.6-day period of the sidereal shifts.

• 한국분말재료학회지
• /
• 제28권2호
• /
• pp.91-96
• /
• 2021

Rare earth magnets with excellent magnetic properties are indispensable in the electric device, wind turbine, and e-mobility industries. The demand for the development of eco-friendly recycling techniques has increased to realize sustainable green technology, and the supply of rare earth resources, which are critical for the production of permanent magnets, are limited. Liquid metal extraction (LME), which is a type of pyrometallurgical recycling, is known to selectively extract the metal forms of rare earth elements. Although several studies have been carried out on the formation of intermetallic compounds and oxides, the effect of oxide formation on the extraction efficiency in the LME process remains unknown. In this study, microstructural and phase analyses are conducted to confirm the oxidation behavior of magnets pulverized by a jaw crusher. The LME process is performed with pulverized scrap, and extraction percentages are calculated to confirm the effect of the oxide phases on the extraction of Dy during the reaction. During the L ME process, Nd is completely extracted after 6 h, while Dy remains as Dy₂Fe₁₇ and Dy-oxide. Because the decomposition rate of Dy₂Fe₁₇ is faster than the reduction rate of Dy-oxide, the importance of controlling Dy-oxide on Dy extraction is confirmed.

• 한국전자파학회지:전자파기술
• /
• 제4권3호
• /
• pp.84-94
• /
• 1993

When a telecommunications line is encountered with neighboring electric lines, induced currents are produced in the circuit formed by those lines and earth. The induced currents sometimes impose intolerable noise problems on the telecommunications lines. In this study, screening factor indication the level of screening effect is defined and calculated several cases together with numerical results.