• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.1045-1048
• /
• 1999

In this paper, we calculate the moving velocity of viewer by using two eye images obtained at different time through the camera. This process is necessary for future 3D display technique, in which moving viewer can see 3D image continuously We firstly extract two eyes image and calculate the pixel coordinate of center point between two eyes. Next, we calculate the moving velocity in two dimension by comparing two center point coordinates obtained at different time.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.264-269
• /
• 2001

Axial fans are widely used in household electrical appliances due to their easy usage and high flow rate for cooling capacity. At the same time, the noise generated by these fans causes one of serious problems. In order to calculate the noise of a fan, we develop the software IFD - Intranet Fans Design. With this software we can design, analysis the performance and predict the noise of fan. The prediction model, which allowed the calculation of acoustic pressure at the blade passing frequency and it's higher harmonic frequencies, has been developed by Lowson's equation. To calculate the unsteady resultant force of the blade, time-marching free-wake method is used. The objective of this study is to calculate the effects of number of blades, rotating velocity, and sweep angle on the noise of fan..

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.270-274
• /
• 2001

Fans are widely used in household electrical appliances due to their easy usage and high performance for cooling capacity. However, the noise generated by these fans causes one of serious problems. LG electronics makes the intranet software for design and analysis of fan. Axial, sirocco and centrifugal fan can be designed and analyzed by using the IFD(Intranet Based Fans Design) software. In order to calculate the aeroacoustic noise of a fan, the numerical method, which can calculate the acoustic pressure at the blade passing frequency and its higher harmonic frequencies, has been developed. To calculate the unsteady resultant force of the blade, vortex method is used. This paper shows the overview of the software and validates the accuracy of predicted noise of fan.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.10-12
• /
• 1997

For a given brushless DC linear motor, we analyze the thrust characteristics. We measure the back-EMF and then calculate the thrust with it. To compare the thrust, we measure it direct with force-torque meter and we calculate it from Lorentz equation. As the thrust and the back-EMF vary linearly according to the current and the velocity respectively, we define the thrust constant and the back-EMF constant. To match the motor to its controller, we calculate the thrust constant and the back-EMF constant. The result calculated with the back-EMF differs from that of the measurement by only 4.4%.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.506-509
• /
• 2008

Mathematical models have been developed to calculate hydrodynamic characteristics of perforated-wall structures. Most of the models separate the fluid regions into front and back of the wall, assume the solution in each region, and calculate the solution by using the matching condition at the wall. The matching condition involves the permeability parameter, which can be calculated by the methods proposed by Mei et al. or Sollitt and Cross. In this study, we compare these two methods. The former is advantageous because all the related variables are known, but it gives wrong result in the limit of long waves, i.e. zero transmission and perfect reflection of very long waves. In deep water, the latter predicts smaller transmission and larger reflection than the former, and vice versa in shallow water. In the latter method, the friction coefficient decreases as the wall thickness or the porosity of the wall increases.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.82-85
• /
• 2002

This paper proposes a new position detection method for train speed control using the PDOA(Phase Difference of Arrival). This method aims to apply to AGT(Automated Guide way Transit) systems, operated with driverless. So it is absolutely required to range, calculate and decide a train position precisely. This system consists of VRS (Vehicle Radio Set) and WRS(Wayside Radio Set). The VRS transmits a wireless signal to the WRS, the controller calculate a straight line with the PDOA. Next step calculate an exact position using track DB. This paper includes the concept, configuration, analysis and results of this method.

• Journal of environmental and Sanitary engineering
• /
• v.17 no.1
• /
• pp.28-35
• /
• 2002

A methods of minimizing the measurement error brought from gas compositions was proposed by Hot wire Anemometer which don't have measurement resistance to calculate of gas vent in sanitary landfill. It was determined measurement error to compared velocity at the center of pipe to calculate using rotor meter and density gas compositions with velocity at the center of pipe to calculate using water head indicator which don't have measurement resistance. Considering the methods of minimizing gas velocity in sanitary landfill using hot wire anemometer and rotor meter, it was found to minimize within 10% as error of gas vent in sanitary landfill.

• Journal of Navigation and Port Research
• /
• v.34 no.2
• /
• pp.123-129
• /
• 2010

The object of this study is to develop the method of safe conducting of a vessel through stormy sea when we encounter typoon or hurricane on ocean. The scope of investigation in this paper will be limited to safe maneuvering related only with rolling motions of a vessel. The processes of investigations are as follows; Firstly, we decide a CPA(Closest Point of Approach) with the center of the storm and decide significant wave height($H_{1/3}$) by SMB method and then calculate wave height of the highest of 1000 waves($H_{1/1000}$) and other data. Secondly, we make mathematical model of rolling motions of the vessel on the stormy sea and calculate the biggest rolling angle of the vessel and etc. Thirdly, we decide the most safe maneuvering method to ride out the stormy sea. By the above mentioned method we are able to calculate the status of the stormy sea and ships motions to be encountered and ride out safely through violently rough sea.

• Structural Engineering and Mechanics
• /
• v.44 no.3
• /
• pp.363-378
• /
• 2012

The stiffness of a suspension system is provided by the bushings and the stiffness of the wheel center controls the suspension's elasto-kinematic (e-k) specification. So the stiffness of the wheel center is very important, but the stiffness of the wheel center is very hard to measure. The paper give a new method that we can use the stiffness of the bushings to calculate the equivalent stiffness of the wheel center, which can quickly and widely be used in all kinds of suspension structure. This method can also be used to optimize and design the suspension system. In the example we use the method to calculate the equivalent stiffness of the wheel center which meets the symmetric and positive conditions of the stiffness matrix.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.5
• /
• pp.389-396
• /
• 2003

Systematic methods to calculate thermodynamic properties of carbon dioxide, HFC-l34a and HCFC-22 are presented. First, application of a basic method to identify the saturation state with given temperature or pressure is attempted and the feasibility of auxiliary equations is tested. Next, detailed procedures are suggested to tell a phase when temperature/pressure and another property are specified. Finally Newton-Raphson method is applied to calculate unknown thermodynamic properties fixing the state with the two independent properties specified. The procedures described here are utilized to develop a computer program, which is used to find the relation between temperature and pressure with maximum isobaric heat capacity for super-critical carbon dioxide.