• 한국건설순환자원학회논문집
• /
• 제12권2호
• /
• pp.214-221
• /
• 2024

본 연구에서는 알루민산칼슘 시멘트(CAC)의 철근 부식 저항성에 관한 것으로서 철근 부식의 위험성을 예측하기 위하여 철근 부식 거동, 염화물 고정화/완충 및 염화물 침투성을 평가하였다. 알루민산칼슘 시멘트 모르타르는 양생 온도와 시멘트의 종류에 관계없이 철근에 부식이 발생하지 않은 반면, 보통포틀랜드시멘트(OPC)는 철근 표면에 심각한 부식이 발생하였다. CAC의 염화물 결합력은 OPC에 비하여 낮은 것으로 나타났지만, pH 감소에 대한 완충 능력은 CAC 페이스트가 훨씬 더 높은 것으로 나타났다. 또한 알루민산칼슘 시멘트를 사용한 시편의 모든 깊이에서 염화물 유입이 감소함으로서 철근 부식의 위험성이 낮아지는 것으로 나타났다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 봄 학술발표회 논문집
• /
• pp.505-512
• /
• 1999

Soft marine clay deposits pose several foundation problems. Generally, lime stabilization is used worldwide for solidifying of soft marine clay deposits. In this paper, a series of laboratory tests were conducted to verify clay-lime reaction. A clay was collected from Pusan, which was mixed with various quantities of quick lime and slaked lime. Various compounds produced by clay-lime reaction were identified by X-ray diffraction analysis. The physico-chemical properties of the clay were also investigated. Compounds such as calcium silicate hydrate (CSH), calcium aluminate hydrate (CAH), calcium aluminate (CA), hillebrandite, and gehlenite were identified. It is likely that such compounds were mainly produced by pozzolanic reaction. Based on the change of physico-chemical properties obtained by the reaction, the water content was considerably decreased when lime was added to the clay. In addition, unconfined strength was increased. In the other hand, quick lime was more effective than slaked lime in decreasing and increasing of the water content and unconfined strength, respectively. Fewer cracks were produced when the clay was mixed with quick lime. It is suggested that these beneficial changes produced by the mixing of the clay and lime depend on the properties of compounds obtained by chemical reaction.

• 한국건축시공학회지
• /
• 제18권5호
• /
• pp.403-412
• /
• 2018

최근 순환골재의 활용에 관한 필요성이 증대되고 있으나, 순환골재의 강알칼리성으로 인해 다양한 문제들이 발생되고 있다. 순환골재의 강알칼리성은 대부분 골재 표면에 완전히 제거되지 못한 시멘트 페이스트에 의해 발현되는 것으로써 이를 해결하기 위해 이산화탄소를 활용하여 순환골재의 pH를 저감하기 위해 노력이 지속되어왔다. 그러나 기존의 이산화탄소를 이용한 처리 방법에 의해 중성화 처리된 순환골재는 시간이 지남에 따라 pH가 다시 회복된다는 문제점을 가지고 있다. 따라서 본 연구에서는 이러한 문제점을 해결하기 위한 방법으로 반응성이 뛰어난 초임계이산화탄소의 활용을 제안하며, 이를 위해 초임계상의 이산화탄소와 수화된 시멘트 페이스트간의 반응 메커니즘을 분석하였다. 그 결과 입자 형태 및 $scCO_2$ 주입량에 따라 중성화 반응정도가 현저하게 달라지는 것으로 나타났다. 특히 powder 형태 시험체에서 $scCO_2$ 주입량이 많은 고온 고압 상태에서 중성화 반응은 활발하게 이루어졌다. 이때 시멘트의 높은 pH를 주도하는 portlandite가 대부분 calcite와 aragonite의 형태로 변환되었으며, ettringite, hemicarbonate 및 monocarbonate와 같은 calcium aluminate 수화물 또한 안정적으로 존재하지 못하고 분해된 것으로 나타났다. 반면, 10mm 크기의 수화된 시멘트 페이스트는 $scCO_2$가 시험체 내부깊이 침투하지 못하고 표면에서만 반응하여, 반응 후에도 내부에 portlandite와 calcium aluminate 수화물이 잔존한다. 이로 인해 시간이 경과할수록 내부의 portlandite가 점차 용출되어 pH가 다시 상승하는 것으로 나타났다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.475-476
• /
• 2010

Hydration products formed on the steel surface may impose the resistance to corrosion of steel when a concrete is exposed to a salt environment. In the present study, ordinary Portland cement (OPC), calcium aluminate cement (CAC) and calcium hydroxide are applied as coating materials on the steel surface to consider the hydrations of each binder at corrosion. Corrosion is measured in terms of the corrosion potential and galvanic current to detect the effects in mitigating the corrosion behavior.

• 한국세라믹학회지
• /
• 제12권4호
• /
• pp.3-8
• /
• 1975

Hydration processes of the rapid hardening cement clinkers, which were synthesized from domestic alunite for major alumina source, limestone, kaolin and fluorite, were investigated by means of x-ray diffraction analysis, thermal analysis and microscopic observation etc. The clinkers were composed mainly of alite, calcium fluroaluminate (C11A7.CaF2) minerals. While the hydratio processes of the clinkers are altered by concentration of SO3 in the paste, calcium aluminate hydrates such as C4AH13, CAH10 and calcium monosulfate hydrate (C3A.CaSO4.12H2O) are formed at first and then some of them are transformed into ettringite(C3A.3CaSO4.32H2O) within 30~60 min. when the concentration of SO3 in the paste are enough. However the formed ettringite are changed slowly into calcium monosulfate hydrate as the concentration of SO3 become lowered, and the paste is hardened with these close-packed minerals. When the content of SO3 in clinker is so enough, calcium sulfoaluminate hydrates are found without any addition of anhydrite or hemi-hydrite.

• 한국건설순환자원학회논문집
• /
• 제3권3호
• /
• pp.199-205
• /
• 2015

이 연구에서는 고온의 축열재료로 사용하기 위한 알루미나 시멘트 복합재료의 역학적 및 열적 특성을 파악하고자 하였다. 알루미나 시멘트를 기본 바인더로 하고 플라이애시, 실리카퓸, CSA (calcium sulfo-aluminate) 및 그라파이트의 치환에 따른 고온에서의 물성을 파악하였다. 알루미나 시멘트 기반 복합재료의 역학적 특성으로서 열사이클 전과 후의 압축강도 및 인장강도를 측정하였다. 또한, 복합재료의 열적 특성으로서 열전도율과 비열을 측정하였다. 열사이클링 적용 이후의 잔류압축강도 측정결과, 알루미나 시멘트만을 사용한 배합과 알루미나 시멘트를 실리카퓸으로 치환한 배합의 압축강도가 크게 나타나며, 이 두 배합의 잔류강도 비는 65%를 상회한다. 그라파이트를 혼합한 복합재료의 비열이 가장 크고 이는 그라파이트의 비열이 크기 때문이다. 연구결과는 콘크리트를 고온조건에서의 축열매체로 활용하기 위한 실제적인 기초실험 자료로 활용될 수 있을 것으로 사료된다.

• 한국세라믹학회지
• /
• 제31권4호
• /
• pp.389-398
• /
• 1994

Calcium aluminate glasses transmit light at relatively long wavelengths up to 6 ㎛ and exhibit also low Rayleigh scattering values. However they have a tendency to get devitrified easily, which limits their use as routine optical materials. Here, the ternary system CaO-Al2O3-SiO2 glasses with low-silica (<30 mol%) were prepared to prevent the devitrification of CaO-Al2O3 glasses and the properties were investigated as functions of composition. The addition of SiO2 to calcium aluminate glasses promoted their stability, which was due to the decrease of non-bridging oxygens and the reconnection of network. As SiO2 was added, density, refractive index, molar volume of oxygens and thermal expansion coefficient decreased continuously. But the glass transition temperatures with increasing SiO2 contents were raised and then lowered. It was postulated that the anomaly was related to the changes of the middle range order as well as the short range order. As the amount of SiO2 in the glass was increased, the IR cut-off values moved to shorter wavelength owing to 'Si-O' antisymetric stretching vibration. The IR cut-off wavelength of the glasses with 5 and 30 mol% SiO2 was 4.90, 4.55 ㎛, respectively.

• 대한금속재료학회지
• /
• 제46권7호
• /
• pp.437-442
• /
• 2008

The synthesis and hydration of Calcium Sulfo Aluminate[$3CaO{\cdot}3Al_2O_3{\cdot}CaSO_4(C_4A_3{\overline{S}})$, CSA cement utilizing secondary steelmaking refining slags is studied for recycling the discarded steel plant wastes to meet the environmental requrations imposed on the steel industry. Raw materials of secondary refining slag, lime sludge, gypsum and bauxite were prepared to be sintered at $1,250^{\circ}C$. The sintered samples were hydrated for 1, 3 and 7 days to evaluate the mineralogical and physico-mechanical properties. The hydration products evaluated with the aid of SEM and XRD analyses confirmed the formation and the continuing growth of ettringite phase with the further hydration times, which plays a role in developing the early strength and the expansion properties of cements. The physico-mechanical properties of hydrated CSA products employing the recycled steelmaking refining slags determined in terms of compressive strength and linear expansion of hydrated products are found to be superior to those of the Ordinary Portland Cement(OPC) or the other commercial CSA cements.

• 한국세라믹학회지
• /
• 제34권7호
• /
• pp.693-698
• /
• 1997

The refractive index and dispersion in the (100-x)(0.6CaO.0.4Al2O3).xSiO2(x=0~30) glasses were investigated. As the amount of SiO2 increased, the refractive index decreased. The change of refractive index was attributed to the change of the molar refraction rather than the molar volume. When the amount of SiO2 was smaller than 20 mol%, the average electronic transition energy gaps(E0) and the electronic oscillator strengths(Ed) were about 10.9($\pm$0.1) nd 18($\pm$0.5)eV, respectively. However E0 and Ed of the glass (CAS30) with 30 mol% SiO2 increased to 12.63 and 19.89eV, respectively. The similar results was observed in the variation of Abbe Number. Abbe number of the glass in the range of 0~20 mol% SiO2 was about 46 and that of CAS30 increased to 60. The zero-material dispersion wavelength({{{{ lambda }}0) of pure calcium aluminate glass was 1.8 ${\mu}{\textrm}{m}$. As the amount of SiO2 increased, the zero-material dispersion wavelength shifted to a shorter wavelength. {{{{ lambda }}0 of CAS30 was 1.5 ${\mu}{\textrm}{m}$, that is currently using for the optical telecommunication system.

• 한국세라믹학회지
• /
• 제37권5호
• /
• pp.438-443
• /
• 2000

This dissertation is focused on the study over the improvement for the early strength of belite-rich cement(BRC). For this purpose, the initial hydration behaviors according to addition of different calcium sulfate types were evaluated. From the observations by XRD, DSC and SEM, the BRC II and III with the addition of natural anhydrate and flue gas desulphurization(FGD) gypsum, respectively, formed much ettringite after 7 days more than the BRC I with the addition of chemical gypsum. The compressive strength of the BRC II and III developed outstandingly due to the formation of calcium aluminate hydrate within pores of hardened BRC paste. Especially, in the case of BRC III adding FGD with low impurities, the early as well as long term compressive strengths were shown very high, compared with other specimens.