• 한국세라믹학회지
• /
• 제23권2호
• /
• pp.43-49
• /
• 1986

By simple substitution of divalent cobalt nickel copper ion in the calcium-fluorapatite the ability to produce color was explored. To determine the solubility limit of cobalt nickel copper in the calcium-fluorapatite and the absorption spectrum with the addition of each transition elements XRD and visible range Spectroscopy were emp-loyed.

• 한국세라믹학회지
• /
• 제14권3호
• /
• pp.187-192
• /
• 1977

For the purpose researching to the influence of tetrahedral and octahedral preference of cations of $Ni^{2+}$, $Ti^{4+}$ upon the formation and the color development of the $ZnO-SnO_2$ spinel containing $Ni^{2+}$ and $Ti^{4+}$ ions, the gradual substitution of $Ni^{2+}$ ions for $Zn^{2+}$ ions and of $Ti^{4+}$ ions for $Sn^{4+}$ ions of the spinel in NiO-ZnO-$SnO_2$-$TiO_2$ system was carried out. On samples prepared by calcining the oxide and basic cabonate mixtures at $1300^{\circ}C$ for 2 hours, the X-ray analysis, measurement of reflectance and the test of their stabilaity as a glaze pigment were also carried out. The results are summarized as follows 1) Single spinel was formed completely to x=1 in the $xNiO\cdot(2-x)ZnO\cdot{SnO}_2$system, and gave brilliant lightgreen hue. Moreover, $NiO\cdot{ZnO}\cdot{SnO}_2$ formed easily spinel than $NiO\cdot{MgO}\cdot{SnO}_2$ because Zn^{2+}$ ions had more strong tetrahedral preference than $Mg^{2+}$ ions. 2) As the gradual substitution of $Ti^{4+}$ ions for $Sn^{4+}$ ions in $NiO\cdot{MgO}\cdot{SnO}_2$ system, the spinels formed well and was nearly not changed in the hue. 3) The results of glaze test. (1) As the gradual substitution of $Ni^{2+}$ ions for $Zn^{2+}$ ions, the color changed from dull white to graish broun gradually in calcium-zinc glaze and calcium glaze, and from white to beige in tile glaze. (2) As the gradual substitution of $Ti^{4+}$ ions for $Sn^{4+}$ ions in $NiO-ZnO-SnO_2-TiO_2$ system, the color was become dull generally and was not change in tile glaze.

• 한국건축시공학회지
• /
• 제20권1호
• /
• pp.27-34
• /
• 2020

건설 산업에서 시멘트 제조 시 발생하는 탄산가스로 인해 순환자원의 재활용 연구가 활발히 진행되고 있는 추세이다. 산업부산물 중 순환유동층 연소방식의 로내 탈황과정에서 생성되는 고칼슘 플라이애시의 경우 CaO 및 CaSO₄의 비율이 높다. 이를 고려하여 본 연구에서는 고로슬래그 미분말에 자극제로서 고칼슘 플라이애시를 혼입 하여 시멘트 대체제로 이용하고자 하였다. 그 결과, HCFA의 치환비율은 15% 이하로 하는 것이 적정할 것이라 판단되며, OPC 보다는 내구성 및 강도가 상대적으로 낮게 도출되었으나 친환경 건축 재료로서 충분히 활용 가능할 것으로 사료된다.

• 한국결정성장학회지
• /
• 제22권6호
• /
• pp.279-285
• /
• 2012

BCP, Mg-BCP, Si-BCP 분말을 공침법(co-precipitation process)을 이용하여 합성하였다. 제조된 분말을 X-선 회절 분석(XRD), 적외선분광분석(FTIR)을 이용하여 특성을 분석하였다. Ca/P 몰 비율이 1.602인 칼슘 결손 아파타이트 공침물을 제조하여 $1000^{\circ}C$ 열처리 과정을 통하여 HAp와 ${\beta}$-TCP 상이 혼재된 BCP, Mg-BCP, Si-BCP을 합성할 수 있었다. 제조된 분말의 생체활성 거동을 평가하기 위하여 Hanks' Balanced Salt Solution(HBSS)에 침적시켜 시간에 따라 형상의 변화 및 결정상을 분석한 결과, BCP 분말에 비하여 금속 이온이 치환된 BCP 분말에서 빠른 생체활성을 관찰할 수 있었다. MTT assay를 통한 세포 성장률 평가에서모든 분말에서 시간 경과에 따라 독성을 나타내지 않았으며, 세포의 활성이 증가하였다.

• 한국결정성장학회지
• /
• 제8권1호
• /
• pp.160-168
• /
• 1998

치환에 의한 wagnerite의 색상변화 및 고용체 형성한계를 살펴보기 위해 wagnerite ($A_2XO_4Z$)를 합성한후 각 구성원소들을 치환하였다. Ca-wagnerite의 Ca 대신에 Mg, Co, Ni, Cu로 치환하여 용해도가 한정된 고용체를 얻었다. 이들 중 (Mg,Ca)-wagnerite와 (Co,Ca)-wagnerite의 경우에만 단일상의 wagnerite를 합성하였으며 이들의 색상은 각각 백색과 자주색이었다. 그 외의 조성 및 (Ni,Ca)-wagnerite와 (Cu,Ca)-wagnerite의 경우에는 여러상이 혼재해 있는 것으로 나타났다. $A^{5+}$자리에 Li을 치환해 보았으며 또한 $X^{5+}$대신 V을 치환하여 진한 자주 및 금색, 옅은 노란색의 wagnerite를 합성하였으며, Z- 대신 Cl을 치환한 경우 단일상의 wagnerite을 얻지 못하였다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제16권2호
• /
• pp.122-129
• /
• 1994

This study was undertaken to determine whether the addition of calcium sulfate to toothash material (Toothash : plaster of paris=2 : 1) would improve its stabilizing property without adversely affecting its osteoconduction. The radiographic and histologic examinations of bone response of this composite material was performed after 1-, 3-, 5-, 8-, and 12-week implantation in calvaria of rats. No sign of extensive inflammatory response was detected. No movement could be observed with this composite material. Creeping substitution was observed in the surgical site. The direct union between toothash and growing bone after 12 weeks of implantation was observed in the defect margin. We could observe this composite implant material is resorbing slowly as time is over.

• 한국건설순환자원학회논문집
• /
• 제11권1호
• /
• pp.9-15
• /
• 2023

시멘트는 대표적인 이산화 탄소 배출 산업이다. 에너지 소비와 CO₂ 배출 저감을 위해 제조 공정 개선 및 대체 재료의 사용확대가 필요하다. 따라서 본 연구는 CO₂ 흡착형 재료인 CAF을 저온 소성하여 시멘트에 적용하여 시멘트 수화의 기본 특성을 확인하였다. 합성 CAF의 수화 생성물에 대한 결정상 분석과 공극 분포, 그리고 구조 이미지를 확인하고, 압축강도를 측정하였다. SCAF는 치환율은 10, 20, 100 %으로 하였으며, 치환율의 증가에 따라 압축강도는 저하되는 경향을 보인다. 또한, SCAF 치환율 100%인 경우, 초기 재령의 수화 생성물은 calcium aluminum oxide hydrate (Ca₃Al₂O₆·xH₂O)와 calcium iron hydroxide (Ca₃Fe(OH)₁₂)이며, 치환율 10, 20 %에서는 일반적인 시멘트 수화물 외에 CAF 화합물인 Brownmillerite가 관찰되었다. 또한, 공극율은 치환율의 증가에 따라 공극 크기가 크고 공극율이 높았다. 본 연구 결과 저온 소성으로 제조된 CAF는 CO₂ 흡착형 재료로 활용을 위해 단독 사용 및 일반 양생은 어려울 것으로 보인다.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1998년도 PROCEEDINGS OF THE 15TH KACG TECHNICAL MEETING-PACIFIC RIM 3 SATELLITE SYMPOSIUM SESSION 4, HOTEL HYUNDAI, KYONGJU, SEPTEMBER 20-23, 1998
• /
• pp.53-53
• /
• 1998

Four valence of Chromium ion doped Yttrium Aluminum Garnet crystals were grown by Floating Zone and Czochralski methods. Changes of valence for Chromium (3+) ion to Chromium (4+) were achieved by substitution of Yttrium ion in dodecahedral site to Calcium and by substitution of Aluminum in octahedral site to Magnesium. Growth conditions for high quality of crystals were investigated. Grown crystals were cut and polished and then observed various types of defects. Characterizations by means of measurement of density and lattice parameter as a function of solidification fraction were performed. Results of Q-switching test using grown crystals were also reported.

• Macromolecular Research
• /
• 제17권10호
• /
• pp.776-784
• /
• 2009

N,N-dimethyldodecylamine (tertiary amine)-modified MMT (DDA-MMT) was prepared as an organically modified layered silicate (OLS), after which styrene-butadiene rubber (SBR) nanocomposites reinforced with the OLS were manufactured via the latex method. The layer distance of the OLS and the morphology of the nanocomposites were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). By increasing the amount of N,N-dimethyldodecylamine (DDA) up to 2.5 g, the maximum values of torque, tensile strength and wear resistance of the SBR nanocomposites were increased due to the increased dispersion of the silicate layers in the rubber matrix and the increased crosslinking of the SBR nanocomposites by DDA itself. When SBR nanocomposites were manufactured by using the ternary filler system (carbon black/silica/OLS) to improve their dynamic properties as a tire tread compound, the tan $\delta$(at $0^{\circ}C$ and $60^{\circ}C$) property of the compounds was improved by using metal stearates instead of stearic acid. The mechanical properties and wear resistance were increased by direct substitution of calcium stearate for stearic acid because the filler-rubber interaction was increased by the strong ionic effect between the calcium cation and silicates with anionic surface. However, as the amount of calcium stearate was further increased above 0.5 phr, the mechanical properties and wear resistance were degraded due to the lubrication effect of the excessive amount of calcium stearate. Consequently, the SBR/organoclay nanocomposites that used carbon black, silica, and organoclay as their ternary filler system showed excellent dynamic properties, mechanical properties and wear resistance as a tire tread compound for passenger cars when 0.5 phr of calcium stearate was substituted for the conventionally used stearic acid.

• Computers and Concrete
• /
• 제13권1호
• /
• pp.97-115
• /
• 2014

Silica fume is a by-product of induction arc furnaces and has long been used as a mineral admixture to produce high-strength, high-performance concrete. Due to the pozzolanic reaction between calcium hydroxide and silica fume, compared with that of Portland cement, the hydration of concrete containing silica fume is much more complex. In this paper, by considering the production of calcium hydroxide in cement hydration and its consumption in the pozzolanic reaction, a numerical model is proposed to simulate the hydration of concrete containing silica fume. The heat evolution rate of silica fume concrete is determined from the contribution of cement hydration and the pozzolanic reaction. Furthermore, the temperature distribution and temperature history in hardening blended concrete are evaluated based on the degree of hydration of the cement and the mineral admixtures. The proposed model is verified through experimental data on concrete with different water-to-cement ratios and mineral admixture substitution ratios.