• 한국건설순환자원학회논문집
• /
• 제11권3호
• /
• pp.202-209
• /
• 2023

In this study, microstructures and mechanical properties of repair materials using calcium sulfoaluminate (CSA) and/or amorphous calcium aluminate (ACA) cements were experimentally investigated. By XRD ansysis, the hydrates formed in repair materials were identified. In addition, the microstructures of repair materials were visually examined through SEM observation. Setting time of mortars made with repair materials were measured. The strength development and ultrasonic velocity of the mortars were also evaluated at the predetermined ages. As a result, it seems that ACA showed a benefit effect with respect to mechanical properties of mortars.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권4호
• /
• pp.1-9
• /
• 2020

본 연구는 철근콘크리트 구조물의 염해 내구성 향상의 일환으로써, 보통 포틀랜드 시멘트에 실험체별 다른 비율의 칼슘 알루미네이트 시멘트와 합성 CA₂를 혼입하여 혼입 비율에 따른 염소이온 고정능력을 평가하였다. 침지 후 실험체의 물리·화학적 특성을 압축강도, 공극 구조, 수화물 분석으로 염소이온침투깊이를 EPMA를 통하여 고찰하였다. 클링커 조성에 CA가 34%미만일 경우 실험체의 조밀성이나 강도 발현 양상이 구조재료로서 사용 제한이 없을 것이라고 판단되었으며 CAC와 CA₂를 5:5비율로 혼입하여 실험체에 치환한 실험체가 CAC 혹은 CA₂만 치환한 실험체보다 염소이온 침투억제능력 과 AFm상 및 프리델 염 생성이 높은 것으로 확인할 수 있었다. 결과적으로, 시멘트 페이스트 대비 칼슘 알루미네이트 클링커 치환율이 증가함에 따라 일반적으로 염소이온 고정능력이 향상하였고, CA-CA₂비율에 따라 염소이온 고정 능력 및 염소이온 침투억제 능력에 차이가 있음을 확인할 수 있었다. 실험 범위 내에서 CA-CA₂비율이 39:60이며 시멘트 페이스트 대비 10% 치환한 실험체인 M 10 가 가장 우수한 것으로 나타났다.

• 한국건설순환자원학회지
• /
• 제11권2호
• /
• pp.35-39
• /
• 2016

• 한국안전학회지
• /
• 제27권4호
• /
• pp.68-75
• /
• 2012

The biogenic corrosion of mortars adopted in sewage repair by sulfuric acid-producing bacteria was considered in this paper. Calcium aluminate cement (CAC) was known to resist microbiologically-induced corrosion significantly better than portland and blended portland cement.In this study, CAC as well portland cement mortars were tested as main binder to evaluate the corrosion resistance by the chemical immersion test. Replacement ratios of CAC were changed as 0, 20, 40, 50, 60% of OPC binder and 0, 2, 4, 6% of EVA(Ethylene Vinyl Acetate) were also adopted to increase properties of CAC repair mortars in sewage application. Setting time, compressive strength, acid resistance and adhesive strength were measured for various experiments. As a results of the experiments, the proper formulation of repair mortars was found at 40% of CAC and 4% of EVA. Finally, the CAC mortars adopted in field sewer pipe and were demonstrated to superior in adhesion and workability.

• 한국세라믹학회지
• /
• 제23권3호
• /
• pp.27-34
• /
• 1986

The hydration of flyash-$Ca(OH)_2-CaSO_4$.$2H_2O$ system was stuedied with varing mixing ratio of flyahs $Ca(OH)_2$ and caSO4.2H2O The samples were steam-cured for 1-7 days at 9$0^{\circ}C$. The optimum mixing composition was flyash : Ca (OH)2=65:35 with 15% $CaSO_4$.42H_2O$ added which produced the hardened material having the best compressive strength (300kg/$cm^2$) Also the low specific gravity(1, 2) of the hardened paste suggests the possibility that it can be used as a light-weight building material. The added $CaSO_4$.42H_2O$ constituted calcium-sulfo-aluminate hydrates which activates the formation of C-S-H hy-drates. Both hydrates developed the strength of hardened paste. The amount of calcium-sulfo-aluminate hydrates was increased when the $CaSO_4$.42H_2O$ was added over 15% however the increased amount did not help the development of strength because of the individually grown calcium-sulfo-aluminate hydrates.

• Journal of Periodontal and Implant Science
• /
• 제32권4호
• /
• pp.769-779
• /
• 2002

This present study was carried out to find the effects of calcium aluminate cement($CaO\;{\cdot}\;Al_2O_3$, CAC), which has been developed with bio-compatibility and mechanical properties, in biological environments. Two different particle sizes of CAC - 3.5${\mu}m$ vs. 212${\sim}$250${\mu}m$ which is recommended in periodontal bone grafting procedures-were filled in 8mm calvarial defect in Sprague-Dawley rat. The specimens were examined histologically, especially the bone-cement interface and the response of surrounding tissues. The results are as follows; 1. In the control group, inflammatory cells were observed at 2 weeks. At 8 weeks, periosteum and dura mater were continuously joined together in the defect areas. But in the center of defect area were filled up with the loose connective tissues. 2. In the experimental group l($212{\mu}m{\sim}250{\mu}m$ particle), immature bone was formed and outermost layer was surrounded by osteoid layer at 2 weeks. Osteoblasts were arranged between immature bone and osteoid layer. And, osteoid layer was remained until 8 weeks after surgery. 3. In the experimental group 2, periosteum and dura mater lost its continuity at 2 weeks. Scattering of CAC particles and infiltration of inflammatory cells were observed, which this findings deepened at 8 weeks. The result of this study shows that when calvarial defects in white rats are filled with calcium aluminate cement of 212${\sim}$250${\mu}m$, the materials are to be bio-compatible in growth and healing on surrounding tissues. When further researches are fulfilled, such as direct bone adhesion and bone regeneration ability, it's possible that CAC could be applied to various periodontology fields in the future.

• 한국세라믹학회지
• /
• 제18권3호
• /
• pp.157-162
• /
• 1981

A converter slag has been heat-treated above melting point at reduced condition by cokes. As the result, most iron was separated. To make hydraulic compounds, calcium oxide was added to the reduced converter slag and the mixtures were sintered. This modified converter slag clinker mainly contained tricalcium silicate and calcium aluminates, and have a great potential to be a good hydraulic cement. The hydrates of the hydraulic compounds and gypsum with and without granulated slags, were mainly C-S-H, ettringite, calcium monosulfoaluminate hydrate, calcium aluminate hydrate, and $Ca(OH)_2$

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.323-328
• /
• 2002

Rapid set accelerators are widely used in tunnel construction, however quality criteria of and dosage are not well established. The density and solid content of admixtures, setting time and compressive strength of paste and mortar with admixtures were investigated to establish the quality criteria. While the early strength of mortar with sodium-silicate, sodium-aluminate and calcium aluminate type admixtures that have high alkali content are very high, but long-term strength are low. Aggregates of shotcrete has to be carefully selected. Sodium-silicate type admixture need longer setting time than the others.

• 시멘트 심포지엄
• /
• 통권40호
• /
• pp.55-63
• /
• 2013

• 한국결정성장학회지
• /
• 제20권6호
• /
• pp.262-266
• /
• 2010

Sol-gel법을 적용하여 $12CaO{\cdot}7Al_2O_3$(C12A7) 전자화물 박막을 제조하기 위해 CaO-$Al_2O_3$ sol을 제조하여 dip 코팅법을 적용하여 quartz 기판에 박막을 형성하였으며 열처리를 통해 C12A7의 박막을 제조하였다. C12A7 상의 형성 $800^{\circ}C$에서 시작되었고 $1,200^{\circ}C$ 온도에서 1시간 열처리를 통해 치밀화된 박막을 제조할 수 있었다. 제조된 C12A7 박막은 부도체였지만 수소 환원 분위기 열처리를 통해 전기전도도를 나타내기 시작했으며 $1,200^{\circ}C$ 48시간 열처리 시 120 S/cm의 전기전도도를 나타내었다.