• Proceeding of EDISON Challenge
• /
• 2013.04a
• /
• pp.205-209
• /
• 2013

본 실험에서는 탄소 cluster 중에서 fullerene 구조를 가질 수 있는 가장 작은 cluster인 $C_{20}$ cluster에 대해, 기존 연구에서 가장 안정한 것으로 제시된 cage(fullerene), bowl, ring의 3가지 구조와 $Si_{20}$ cluster를 모방한 구조 하나의 안정성을 확인하였다. ab-initio calculation을 지원하는 Edison nanophysics의 LCAODFLab을 이용하여 LDA-CA, GGA-PBE 두 가지 방법으로 계산하였다. 계산 값을 바탕으로 각 구조의 원자화에너지를 비교한 결과 LDA와 GGA 모두 cage, bowl, ring의 순서로 안정하였다. 최적화한 구조에 대하여 구조분석을 진행하였다. 최적화 결과 Bowl은 $C_{5v}$, ring은 $D_{10h}$, cage는 $C_{2h}$ 대칭성을 가지는 구조였으며, LDA, GGA 계산 모두 $C_{20}$ 구조의 spin polarization에는 영향을 받지 않았다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.872-873
• /
• 2007

This paper proposes a calculating method of resistance and inductance of end ring of squirrel cage induction motor for 2D finite element analysis. The squirrel cage of induction motor consists of bars and end rings. The resistance and inductance of end ring have an effect on the result of the finite element calaculation. If the end ring were excluded from the analysis, the good result could not be obtained. Therefore, we first simulate an axisymmetric magnetodynamic analysis for the end ring, and then calculate the interbar resistance and the end ring inductance. The calculated values are put into the external circuit of 2D finite element model of the induction motor. The proposed method is verified by comparing the numerical results with the experimental ones.

• Journal of Korean Neurosurgical Society
• /
• v.37 no.5
• /
• pp.389-391
• /
• 2005

We report a case of T4 bursting fracture with paraparesis that recovered by posterior approach. A 47-year-old man presented with paraparesis (grade III) which had progressed rapidly after motor cycle accident. After sacrificing the T4 nerve root (right), posterior interbody fusion using cage following T4 corpectomy and T3-4, T4-5 discectomy was performed. After operation, lower extremities motor power improved and he could walk after one month. And this is the first report of posterior approach using cage by corpectomy and two level discectomy in case of upper thoracic burst fracture in Korea.

• Nuclear Engineering and Technology
• /
• v.53 no.8
• /
• pp.2669-2681
• /
• 2021

Valve is widely used in the various industry areas to adjust and control the flow. Cavitation frequently takes place and sometimes is inevitable in various types of valve to cause the erosion damage. Therefore, how to control and minimize the effect of cavitation is still an important topic. This study numerically investigates the cavitating flow in a control valve with a perforated cage. The effects of some parameters on the cavitation are discussed. It also discusses to use the throttling steps to govern the cavitating flow. The results show that the opening degree of valve and the length of downstream divergent connection both influence the cavitation. The increase of the divergent length reinforces the cavitation. And the larger the opening of valve is, the intenser the cavitation is and the more vapor is present. The more throttling steps are helpful to decrease the cavitation.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.2 no.2
• /
• pp.151-159
• /
• 1997

Benthic respiration and chemical fluxes were measured at the sediment-water interface underlying the marine fish cages floating on the open coastal waters off Tong-Young, the South Coast of Korea. The effects of cage farming on coastal benthic environment and on mass balance of organic carbon in the benthic boundary layer under the marine fish cages are addressed. In a growing season of caged fishes of June, 1995, benthic chambers and sediment traps were deployed on the sediment-water interfaces of the two sites chosen for this study: 1) Cage Site, directly underlying the fish cages of the farm at 18 m water depth, and 2) Control Site, about 100 m away from the farm at 32 m water depth. Benthic respiration rates and chemical fluxes were calculated from the evolution of dissolved oxygen and chemicals in the chamber water, and mass balance of organic carbon in the benthic boundary layer was constructed based on the vertical flux of particulate organic matter (POM) and chemical fluxes out of the sediment. High organic dumping (6400 mg C $m^{-2}d^{-1}$) and high benthic respiration (230 mmol $O_2\;m^{-2}d^{-1}$) were observed at the Cage Site. Equivalent to 40% of vertical flux of organic carbon into the Cage Site seemed to be decomposed concurrently and released back to overlying waters (2400 mg C $m^{-2}d^{-1}$). Consequently, up to 4000 mg C $m^{-2}d^{-1}$ of organic carbon could be buried into the farm sediment (equivalent to 60% of organic carbon flux into the Cage Site). At the Control Site, relatively less input of organic carbon (4000 mg C $m^{-2}d^{-1}$) and low benthic respiration rate (75 mmol $O_2\;m^{-2}d^{-1}$) were observed despite short distance away from the cages. The influence of cage farming on benthic chemical fluxes might be restricted and concentrated in the sea bottom just below the fish cages in spite of massive organic dumping and high current regime around the fish cage farm.

• Korean Journal of Poultry Science
• /
• v.29 no.4
• /
• pp.255-258
• /
• 2002

A study was conducted to investigate the correlation of cecal anaerobic bacterial counts with the cecal length in growing chicks. Half of 160 chicks of five weeks old were housed in cages and the remainings were kept with goats in free-range and allowed to have free access to goat's feed and faeces. All the experimental birds were fed ad libitum on a commercial chick formula diet during the period of 5 to 12 weeks of age. Body weight was larger in birds reared in the cage than in those reared on the field at 8 weeks of age (P<0.05), but vice versa at the end of experiment (P<0.05). The cecal length was longer in field-rearing than in cage-rearing at 6, 9, 10 and 11 weeks of age (P<0.05). The cecal length was correlated with body weight gain in both rearing groups (r=0.816 f3r cage-rearing, r=0.816 for field-rearing). The cecal anaerobic bacterial counts were significantly higher in field- rearing than in cage-rearing at 6, 9, 10 and 11 weeks of age (P<0.05). The cecal length was highly correlated with cecal anaerobic bacterial counts in cage- (r=0.9549) and field-(r=0.9866) rearing. It is concluded that the correlation of increase cecal length with increased cecal anaerobic bacterial counts ted a libelous of goat's faeces in growing chicks.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.1
• /
• pp.43-50
• /
• 2001

In order to analyze the dynamic motions of fish cage systems made of a frame and a netting under the conditions of waves and current, the hydraulic model experiment at towing tank and the numerical computation using boundary integral element method based on linear potential theory were carried out on a square and a circular type of fish cage, The computed and measured results for the dynamic motions of model fish cage systems showed that the heave and pitch motions were almost unaffected by the inclusion of nets, while the surge motions were very reduced by drag force acting on them. In addition, irregular wave-induced motions of fish cages included non-negligible 2nd order harmonic components at high frequency nearly twice the wave frequency. The reason why these motions were considered was due to resonance or structural components of frames being overflown and out of water during a wave cycle. It was found that circular type was more desirable structure in the open sea than square one only in the respect of dynamic motions due to waves and current. Further verifications were needed considering hydrodynamic forces, fatigue life, and structure analysis based on long term stochastic waves including frequency and time domain for the purpose of analyzing and designing fish cage systems.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.37 no.1
• /
• pp.45-51
• /
• 2001

In order to investigate the optimal design weight of sinkers for preventing cage net from deforming in current, the model experiment on 2 types of square cage nets with different S sub(n)/S, the ratio of total area of netting projected to the perpendicular to the water flow S sub(n) to wall area of netting S, and 4 kinds of sinkers was carried out in circulation water channel. The model cage nets were made in 1/10 scale and the total weight in water of 4 sinkers attached to each corner of their bottom frames was 18, 54, 90, and 126g, respectively equivalent to 0.1, 0.3, 0.5, and 0.7 kg per unit area of prototype net. The results obtained can be summarizes as follows; Due to the deformation of each net where it was lifted towards the surface in severe conditions, its volume was reduced. This depended highly on the weight of sinkers placed in the bottom corner of cage nets, even if the variation of S sub(n)/S had a little effect on their deformation in current less than 0.4 m/s. In addition, it was observed that the total weight of sinkers for preventing the net from deforming to the extent of less than 50% inside its initial volume was 31 to 245 kg in the range of 0.3 to 0.6 m/s and the adequate design weight of sinker was approximately 0.5 kg per its unit area.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.2
• /
• pp.217-225
• /
• 1998

This study was performed to compare the effects of a fish cage on the structure of meiobenthic communities at two locations during May, 1996. The number of meiofaunal taxa at the existing cage site and control site was 15 and 26, respectively. Nematoda was the most dominant group of meiobenthos. Nematoda and Sarcomastigophora comprised more than $90\%$ of total meiofauna at both sites. The total density of control site was 7,702 inds./$10\;cm^{2}$ which is 10 times more than that of fish cage site. The density was highest in the upper 1 cm and decreased with sediment depth. The nematodes/harpacticoid copepods ratio as an index of pollution monitoring for benthic ecosystem at fish cage site was two times higher than at control site. Kinorhyncha known to be sensitive to pollution stress was not found at fish cage site.

• Journal of Korean Neurosurgical Society
• /
• v.60 no.6
• /
• pp.611-619
• /
• 2017

Objective : In addition to bone bridging inside a cage or graft (intragraft bone bridging, InGBB), extragraft bone bridging (ExGBB) is commonly observed after anterior cervical discectomy and fusion (ACDF) with a stand-alone cage. However, solid bony fusion without the formation of ExGBB might be a desirable condition. We hypothesized that an insufficient contact area for InGBB might be a causative factor for ExGBB. The objective was to determine the minimal area of InGBB by finite element analysis. Methods : A validated 3-dimensional, nonlinear ligamentous cervical segment (C3-7) finite element model was used. This study simulated a single-level ACDF at C5-6 with a cylindroid interbody graft. The variables were the properties of the incorporated interbody graft (cancellous bone [Young's modulus of 100 or 300 MPa] to cortical bone [10000 MPa]) and the contact area between the vertebra and interbody graft (Graft-area, from 10 to $200mm^2$). Interspinous motion between the flexion and extension models of less than 2 mm was considered solid fusion. Results : The minimal Graft-areas for solid fusion were $190mm^2$, $140mm^2$, and $100mm^2$ with graft properties of 100, 300, and 10000 MPa, respectively. The minimal Graft-areas were generally unobtainable with only the formation of InGBB after the use of a commercial stand-alone cage. Conclusion : ExGBB may be formed to compensate for insufficient InGBB. Although various factors may be involved, solid fusion with less formation of ExGBB may be achieved with refinements in biomaterials, such as the use of osteoinductive cage materials; changes in cage design, such as increasing the area of polyetheretherketone or the inside cage area for bone grafts; or surgical techniques, such as the use of plate/screw systems.