• Journal of Biomedical Engineering Research
• /
• v.25 no.4
• /
• pp.283-288
• /
• 2004

The finite element modeling of small female occupant for crash simulation is presented in this paper subsequently to the part I of articulated rigid body model. The limbs and internal components are additionally modeled by joining them to the articulated rigid body model for predicting the crash injuries such as bone fractures and joint dislocations. The behavioral characteristics of each limbs and internal components were validated against available cadaveric test results. Accordingly, the human model proposed in this paper could be utilized for the investigation of impact injury mechanism and further complement the lacking biofidelity of current crash dummy.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.8
• /
• pp.984-991
• /
• 2011

The aim of this study is to develop a humeral Intramedullary fixation nail (HIFN) suitable for Korean people. In this study, CT images were obtained from 72 Korean cadaveric humeral bones and 3D Korean humeral bone models were reconstructed based on the CT images to investigate anatomical characteristics. Major design parameters of HIFN were selected using the morphological measurement information of the Korean humeral bone models. Through finite element analysis and mechanical tests, the developed HIFN prototype was compared with the Polarus HIFN ($ACUMED^{(R)}$, USA), and it was found that the HIFN prototype showed similar and/or superior mechanical performance compared to the Polarus HIFN. Also, clinical validation for the HIFN prototype was carried out to check predictable troubles in surgical operations. Finally, optimal design modification was proposed to prevent the possible axillary nerve injury due to the locking screw system of the HIFN prototype.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1527-1532
• /
• 2008

45% of the sports accidents is the knee damage and the representative case is the damage of an Anterior Cruciate Ligament (ACL) and the Posterior Cruciate Ligament(PCL). Although the past different views of ACL reconstruction comes to an agreement, the disputes of PCL is remained yet. The most important engineering approach for these various surgery techniques is accurately to understand and to evaluate the fatigue behavior depending on the stress flow and the stress distribution under the allotted load and the cyclic load, which are caused by the graft fixing device, the proximal tibia of the PCL reconstructing structure. Therefore, this study is the basic research of these above facts. The current transtibial tunnel surgery using the cadaveric Achilles tendon grafts is chosen for the various PCL reconstruction. The relationships between the slippage, the extension ratio, and the slippage ratio by the heel bone fixing method and the soft tissue fixing method of the Achilles tendon were also defined. This research will be the essential data to help the resonable operating techniques for the next PCL reconstruction.

• Archives of Plastic Surgery
• /
• v.43 no.4
• /
• pp.374-378
• /
• 2016

Submandibular gland ptosis is a common impediment to obtaining superior surgical aesthetic results in neck lift surgery. Techniques for suspending the submandibular gland have been proposed, but these procedures have the drawbacks of disturbing the floor of the mouth mucosa and periosteum. We present an approach of submandibular gland suspension for the treatment of gland ptosis by employing a platysma and hyoid bone fascia cradle. Our technique was performed on cadaveric models. The platysma muscle and hyoid bone cradle for submandibular gland ptosis was created on the left side of the neck in two cadavers. A submental incision with sharp dissection was performed to raise a supraplatysmal flap. A subplatysmal plane was developed until the submandibular gland was identified. Sutures were used to pexy the platysma to the hyoid bone periosteum and deep cervical fascia, tightening the overlying muscle and in turn elevating the submandibular gland. Submandibular gland ptosis must be corrected in order to achieve exemplary aesthetic results. Our approach of creating a cradle with the platysma and hyoid bone avoids the potential complications of previously described sling procedures, while still maintaining the integrity of the gland and surrounding tissues.

• Korean Journal of Veterinary Research
• /
• v.60 no.2
• /
• pp.49-54
• /
• 2020

The goal of this study was to determine if there was a difference in leak pressure between esophageal-esophageal anastomosis and esophageal-jejunal anastomosis when using cadaveric porcine tissue. Leak pressures were recorded for esophageal-esophageal anastomosis (Group 1 [control group], n = 7), cranial esophageal-jejunal anastomosis (Group 2, n = 7), and jejunal-caudal esophageal anastomosis (Group 3, n = 6). Each anastomosis was performed using polydioxanone sutures in a simple interrupted pattern. Results were analyzed using one-way analysis of variance. Mean ± SD of the leak pressures for groups 1, 2, and 3 were 46.1 ± 15.9, 36.5 ± 13.6, and 50.9 ± 11.1 mmHg, respectively (p = 0.18). When the results from groups 2 and 3 were combined and compared to that for Group 1, the mean ± SD leak pressures were 46.1± 15.9 and 43.1± 14.2 mmHg, respectively (p = 0.67). These results provide preliminary evidence that the jejunum may be a suitable option for use in esophageal replacement surgery; however, future studies of in vivo factors influencing the integrity of esophageal-jejunal anastomoses, including histologic evaluation of esophageal-jejunal anastomosis healing, are needed.

• Biomaterials and Biomechanics in Bioengineering
• /
• v.3 no.2
• /
• pp.85-104
• /
• 2016

Stability and loosening of implanted femoral stems in Total Hip Replacement have been well established as barriers to the primary concerns of osseointegration and long term implant survival. In-vitro experiments and finite element modeling have for years been used as a primary tool to assess the bone stem interface with variable methodologies leading to a wide range of micromotion, interference fit and stress shielding values in the literature. The current study aims to provide a comprehensive review of currently utilized methodologies for in-vitro mechanical testing as well as finite element modeling of both micromotion and interference of implanted femoral stems. A total of 12 studies detailed in 33 articles were selected for inclusion. Experimental values of micromotion ranged from 12 to $182{\mu}m$ while finite element analysis reported a wider range from 2.74 to $1,277{\mu}m$. Only two studies were found that modeled bone/implant contact with consideration for interference fit. In studies evaluating stem micromotion in THA, the reference surface at the bone/stem interface should be well defined. Additionally, the amount of penetration considered should be disclosed and associated with bone density and roughness.

• Advances in biomechanics and applications
• /
• v.1 no.1
• /
• pp.67-76
• /
• 2014

Bone properties are one of the key components when constructing models that can simulate the mechanical behavior of a mandible. Due to the complexity of the structure, the tooth, ligaments, different bones etc., some simplifications are often considered and bone properties are one of them. The objective of this study is to understand if a simplification of the problem is possible and assess its influence on mandible behavior. A cadaveric toothless mandible was used to build three computational models from CT scan information: a full cortical bone model; a cortical and cancellous bone model, and a model where the Young's modulus was obtained as function of the pixel value in a CT scan. Twelve muscle forces were applied on the mandible. Results showed that although all the models presented the same type of global behavior and proximity in some locations, the influence of cancellous bone can be seen in strain distribution. The different Young's modulus defined by the CT scan gray scale influenced the maximum and minimum strains. For modeling general behavior, a full cortical bone model can be effective. However, when cancellous bone is included, maximum values in thin regions increase the strain distribution. Results revealed that when properties are assigned to the gray scale some peaks could occur which did not represent the real situation.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.42
• /
• pp.2.1-2.6
• /
• 2020

Background: Facial palsy treatment comprises static and dynamic techniques. Among dynamic techniques, local temporalis transposition represents a reliable solution to achieve facial reanimation. The present study describes a modification of the temporalis tendon transfer using a cryopreserved fascia allograft. Case presentation: Between March 2015 and September 2018, seven patients with facial palsy underwent facial reanimation with temporalis tendon transfer and fascia lata allograft. Patients with long-term palsy were considered, and both physical and social functions were evaluated. The mean follow-up time was 21.5 months. No immediate complications were observed. Patients reported improvement in facial symmetry both in static and dynamic. Improvement was noticed also in articulation, eating, drinking, and saliva control. The Facial Disability Index revealed an improvement both in physical function subscale and in the social/well-being function subscale. Conclusions: This modified orthodromic technique allows to reduce the operative time and the risk of complications connected to the use of autologous tissues. The use of the cryopreserved fascia allografts from cadaveric donors seems to provide promising and long-standing results in the treatment of facial palsy.

• Anatomy and Cell Biology
• /
• v.51 no.4
• /
• pp.225-231
• /
• 2018

Variations in the vascular anatomy of the carotid triangle have been reported in current scientific literature. The carotid arteries, being the major feeding arteries of the head and neck deserve special importance and protection from iatrogenic injury during radiological evaluations and surgical interventions. The present study was carried out over a period of 4 years from 2012-2016 to assess the variant anatomy of external carotid artery. The external carotid artery and its branches were dissected bilaterally in 40 formalin embalmed cadavers. The external carotid artery was traced from its origin to termination and variations in the branching pattern as well as the level of the carotid bifurcation were observed and analysed. A higher carotid bifurcation was observed in 25% cases. The linguofacial trunk was the commonest variation noted in the branching pattern seen in 20% cases. A single case of unilateral thyrolinguofacial trunk was also observed. The external carotid artery gave rise to accessory branches in 7.5% cases namely the superior laryngeal, accessory ascending pharyngeal and masseteric branches. A slender branch to the internal jugular vein was also observed in one case. These findings may provide further insight into the understanding of the vascular anatomy of the carotid triangle to the curious student, the discerning radiologist and the vigilant surgeon to avert complications and help improve overall treatment outcome.

• Anatomy and Cell Biology
• /
• v.51 no.4
• /
• pp.243-250
• /
• 2018

Because of its embryonic origin, the thyroid gland is predisposed to multiple anatomical variations and developmental anomalies. These include the pyramidal lobe, the origin of levator glandular thyroidae, the absence of the isthmus, ectopic thyroid, accessory thyroid tissues, etc. These anatomical variations are clinically significant to surgeons, anatomists, and researchers. The present study was designed to report anatomical variations and developmental anomalies of the thyroid gland in Ethiopian population. The study was conducted on 40 cadavers used for routine dissection classes. The thyroid gland was exposed and observed for any variations and developmental anomalies. The length, width, and thickness of the lobes were measured using a vernier caliper. Differences in the incidence of pyramidal lobe and absence of the isthmus between sexes were tested using a Pearson chi-square test. The mean length, width, and thickness of the right lobe were 4.24 cm, 1.8 cm, and 1.6 cm, respectively, whereas it was 4.08 cm, 1.8 cm, and 1.6 cm, respectively for that of the left lobe. The pyramidal lobe was noted in 52.5% of the cadavers. The levator glandulae thyroidae were prevalent in 40% of the cadavers. The isthmus mainly overlies the 2nd to 4th tracheal rings and was absent in 7.5% of the cadavers. Accessory thyroid tissue and double pyramidal lobes were noted in 2.5% of the cadavers. Most of the variations of the thyroid gland were seen frequently in female but it was not statically significant. Different clinically important and rare variations of the thyroid gland were found.