• Anatomy and Cell Biology
• /
• 제57권2호
• /
• pp.204-212
• /
• 2024

In the present study, anatomical assessment of zygomaticofacial foramina (ZFFs) and zygomatic canals communicating with ZFFs were performed using cadaver micro-computed tomography images. It was suggested that all ZFFs were located above the jugale (Ju)-zygomaxillare (Zm) line, which is the reference line connecting the Ju and Zm, and most were located in the zygomatic body area (ZBA). The anteroposterior position of the ZFF in the ZBA was within a middle to posterior region and was most often located slightly posteriorly in males and closer to the middle of the region in females. The mean distance from the Ju-Zm line to the ZFF in the ZBA was 12.36 mm (standard deviation [SD] 1.52 mm) in males and 11.48 mm (SD 1.61 mm) in females. In zygomatic canals communicating with ZFFs, most zygomatic canals were type I canals, communicating from the zygomaticoorbital foramen and harboring the zygomaticofacial nerve, and the others were type II canals, communicating from the zygomaticotemporal foramen and located near the posterior margin of the frontal process. These results provide useful anatomical information for preventing nerve injury during surgical procedures for zygomatic implant treatment.

• Journal of Veterinary Science
• /
• 제23권2호
• /
• pp.38.1-38.13
• /
• 2022

Background: Minimally invasive surgery (MIS) technique of sacroiliac luxation in toy breed dogs using cannulated screws has not been described. Objectives: The purpose of this study was to evaluate the effectiveness of pelvic canal recovery, the reproducibility of successful surgery outcomes, and the acceptable difficulty of the procedure in MIS of sacroiliac luxation in toy breed dogs. Methods: MIS using 2.3-mm cannulated screws was demonstrated in 12 toy breed dog cadavers with sacroiliac luxation artificially induced. Pre and postoperative radiographs were used to evaluate the pelvic canal diameter ratio (PCDR), hemipelvic canal width ratio (HCWR), and reduction rate. Dorsoventral angle (DVA) and craniocaudal angle (CCA) of the inserted screw were obtained postoperative computed tomographic scan. Results: The statistically significant difference between the mean pre and postoperative PCDR was found (1.10 ± 0.12 and 1.26 ± 0.11, respectively; p = 0.002), and the mean HCWR close to 1.0 meaning symmetric pelvis also was obtained (0.97 ± 0.07). The mean DVA and CCA were 2.26° ± 1.33° and 2.60° ± 1.86°, respectively. Conclusions: MIS of sacroiliac luxation using 2.3-mm cannulated screws is applicable to toy breed dogs with acceptable difficulty.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1998년도 추계학술대회
• /
• pp.57-59
• /
• 1998

For medical students and doctors, knowledge of the three-dimensional (3D) structure of brain is very important in diagnosis and treatment of brain diseases. Two-dimensional (2D) tools (ex: anatomy book) or traditional 3D tools (ex: plastic model) are not sufficient to understand the complex structures of the brain. However, it is not always guaranteed to dissect the brain of cadaver when it is necessary. To overcome this problem, the virtual dissection programs of the brain have been developed. However, most programs include only 2D images that do not permit free dissection and free rotation. Many programs are made of radiographs that are not as realistic as sectioned cadaver because radiographs do not reveal true color and have limited resolution. It is also necessary to make the virtual dissection programs of each race and ethnic group. We attempted to make a virtual dissection program using a 3D image of the brain from a Korean cadaver. The purpose of this study is to present an educational tool for those interested in the anatomy of the brain. The procedures to make this program were as follows. A brain extracted from a 58-years old male Korean cadaver was embedded with gelatin solution, and serially sectioned into 1.4 mm-thickness using a meat slicer. 130 sectioned specimens were inputted to the computer using a scanner ($420\times456$ resolution, true color), and the 2D images were aligned on the alignment program composed using IDL language. Outlines of the brain components (cerebrum, cerebellum, brain stem, lentiform nucleus, caudate nucleus, thalamus, optic nerve, fornix, cerebral artery, and ventricle) were manually drawn from the 2D images on the CorelDRAW program. Multimedia data, including text and voice comments, were inputted to help the user to learn about the brain components. 3D images of the brain were reconstructed through the volume-based rendering of the 2D images. Using the 3D image of the brain as the main feature, virtual dissection program was composed using IDL language. Various dissection functions, such as dissecting 3D image of the brain at free angle to show its plane, presenting multimedia data of brain components, and rotating 3D image of the whole brain or selected brain components at free angle were established. This virtual dissection program is expected to become more advanced, and to be used widely through Internet or CD-title as an educational tool for medical students and doctors.

• 한국융합학회논문지
• /
• 제12권9호
• /
• pp.57-63
• /
• 2021

이 연구는 한국인 성인 시신의 얼굴근육을 해부하고 삼차원 스캔하여, 사실적인 얼굴근육의 형태를 삼차원 오브젝트를 만들고, 이를 통해 표정을 재현하여 카데바 얼굴근육의 복합적인 움직임을 삼차원적으로 관찰 가능한 교육 자료를 제작하는데 목적이 있다. 카데바 해부 사진 자료를 이용하여, 얼굴근육에 대해 삼차원 모델링 하였고, 네 가지 표정(슬픔, 미소, 놀람, 분노)에 따라 얼굴근육이 변화하는 삼차원 영상을 제작하였다. 이를 통해, 삼차원으로 구현한 카데바 얼굴근육의 복합적인 작용과 다양한 표정 변화를 확인할 수 있었다. 이 연구결과는 얼굴근육의 개별적인 기능에 대한 정량적인 자료를 확인할 수는 없지만, 사실적이고 입체적인 카데바의 얼굴근육 형태를 관찰할 수 있고, 복합적인 얼굴근육의 작용으로 인한 표정 변화를 확인할 수 있다. 이러한 자료는 얼굴근육의 해부학적 교육 자료로 활용할 수 있을 것으로 기대한다.

• Advances in biomechanics and applications
• /
• 제1권3호
• /
• pp.169-185
• /
• 2014

Computational multibody models of the elbow can provide a versatile tool to study joint mechanics, cartilage loading, ligament function and the effects of joint trauma and orthopaedic repair. An efficiently developed computational model can assist surgeons and other investigators in the design and evaluation of treatments for elbow injuries, and contribute to improvements in patient care. The purpose of this study was to develop an anatomically correct elbow joint model and validate the model against experimental data. The elbow model was constrained by multiple bundles of non-linear ligaments, three-dimensional deformable contacts between articulating geometries, and applied external loads. The developed anatomical computational models of the joint can then be incorporated into neuro-musculoskeletal models within a multibody framework. In the approach presented here, volume images of two cadaver elbows were generated by computed tomography (CT) and one elbow by magnetic resonance imaging (MRI) to construct the three-dimensional bone geometries for the model. The ligaments and triceps tendon were represented with non-linear spring-damper elements as a function of stiffness, ligament length and ligament zero-load length. Articular cartilage was represented as uniform thickness solids that allowed prediction of compliant contact forces. As a final step, the subject specific model was validated by comparing predicted kinematics and triceps tendon forces to experimentally obtained data of the identically loaded cadaver elbow. The maximum root mean square (RMS) error between the predicted and measured kinematics during the complete testing cycle was 4.9 mm medial-lateral translational of the radius relative to the humerus (for Specimen 2 in this study) and 5.30 internal-external rotation of the radius relative to the humerus (for Specimen 3 in this study). The maximum RMS error for triceps tendon force was 7.6 N (for Specimen 3).

• Archives of Plastic Surgery
• /
• 제36권1호
• /
• pp.24-28
• /
• 2009

Purpose: As a recipient vessel, internal mammary vessels have many advantages for microvascular reconstruction of the breast. But the approach is time consuming and results in large morbidities. However, the perforating branches of the internal mammary vessels can be used to minimize such demerits. The purpose of this cadaver study is to clarify the location and diameter of the perforating branches of internal mammary vessels and to prove they are safe and reliable recipient vessels. Methods: We studied 11 formalin - fixed cadavers and dissected their anterior chests bilaterally. The chests were exposed using midline presternal incisions. We dissected and found all perforators at subfascial planes under loupe magnification. The number, external diameter, and the distance from the midline were measured. Result: The mean external diameter of the arterial perforators was 1.32 mm and the mean external diameter of the venous perforators was 1.48 mm. The largest arterial and venous perforators were most frequently found in the second intercostal space. The mean distance from the midline to the perforator was evaluated; the artery averaged 1.95 cm and the vein averaged 2.08 cm. Conclusion: This study will be helpful when using the internal mammary perforating vessels as a recipient vessel during breast reconstruction.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.199-200
• /
• 2008

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 추계학술대회
• /
• pp.213-217
• /
• 1997

In this study, three-dimensional inite element model was developed and analyzed or DAI using ABAQUS. To verify the developed FE model, simulated results were compared to experimental results of human cadaver by Nahum et. al. (1977). The effect of acceleration pattern and accelerating duration time or DAI was analyzed by means of maximum shear stress and pressure distribution. DAI was favored or angular acceleration rather than linear acceleration, and occured in brain stem, pons and midbrain easily as accelerating duration time was increased.

• 한국콘텐츠학회논문지
• /
• 제16권6호
• /
• pp.474-480
• /
• 2016

유혈의 살인사건 현장에서 피해자의 피부에 남겨진 혈지문은 신원확인에 있어서 강력한 증거물이 되기 때문에 이를 현출하는 일은 매우 중요하다. 본 연구에서는 시체 피부에 유류된 혈지문에 혈지문 증강시약들을 적용하여 그 효과성을 비교하였다. 순천향대학교 의과대학 해부학교실에 기증된 한국인 남성의 시체를 사용하여 실험을 진행하였다. 연구자의 우수무지에 혈액을 묻혀 7개 부위에 Depletion series로 지문을 유류하였으며, 잠재된 혈지문 증강을 위해 9~10번째 지문을 선택하여 비교하였다. 혈문고상제와 증강시약을 각각 티슈법으로 적용한 뒤 그 효과성을 비교한 결과, LCV가 융선 및 특징점을 확인할 수 있는 가장 좋은 대조비와 선명한 결과를 나타냈고, Acid violet 17은 융선은 확인할 수 있었으나 특징점을 확인하기는 어려웠다. Amino black과 Coomaisse blue, Crowle's doublue stain은 일부 융선이 뭉개지거나 대조비가 낮은 모습을 보였고, Hungarian red는 배경이 함께 염색되면서 가장 낮은 효과를 나타냈다.

• 대한두개안면성형외과학회지
• /
• 제12권2호
• /
• pp.86-92
• /
• 2011

Purpose: The purpose of this study was to investigate the possibility that a dynamic facial composite flap with sensory and motor nerves could be made available from donor facial composite tissue. Methods: The faces of 3 human cadavers were dissected. The authors studied the donor faces to assess which facial composite model would be most practicable. A "panorama facial flap" was excised from each facial skeleton with circumferential incision of the oral mucosa, lower conjunctiva and endonasal mucosa. In addition, the authors measured the available length of the arterial and venous pedicles, and the sensory nerves. In the recipient, the authors evaluated the time required to anastomose the vessels and nerve coaptations, anchor stitches for donor flaps, and skin stitches for closure. Results: In the panorama facial flap, the available anastomosing vessels were the facial artery and vein. The sensory nerves that required anastomoses were the infraorbital nerve and inferior alveolar nerve. The motor nerve requiring anstomoses was the facial nerve. The vascular pedicle of the panorama facial flap is the facial artery and vein. The longest length was 78 mm and 48 mm respectively. Sensation of the donor facial composite is supplied by the infraorbital nerve and inferior alveolar nerve. Motion of the facial composite is supplied by the facial nerve. Some branches of the facial nerve can be anastomosed, if necessary. Conclusion: The most practical facial composite flap would be a mid and lower face flap, and we proposed a panorama facial flap that is designed to incorporate the mid and lower facial skin with and the unique tissue of the lip. The panorama facial composite flap could be considered as one of the practicable basic models for facial allotransplantation.