• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 추계학술대회
• /
• pp.770-771
• /
• 2015

본 논문에서는 발전소 전기설비 및 구축비용의 상당부분을 차지하는 케이블의 손실자원을 최소화하고, 효율적인 케이블 자재관리가 가능한 케이블 드럼 스케줄링 자동화를 제안하고 구현하였다. 구현된 케이블 드럼 스케줄링은 기존 수기방식의 케이블 드럼 계산에 소요되는 소비시간을 최소화하고, 종류별 케이블들을 케이블 드럼 총용량에 최적화함으로써 전기설비 생산성을 향상시킬 수 있다.

• 디지털콘텐츠학회 논문지
• /
• 제17권4호
• /
• pp.257-263
• /
• 2016

케이블 드럼 스케줄은 발전소 전기설비 설계를 위한 최종단계로 레이스웨이에 포설 계획된 케이블들을 효율적으로 케이블 드럼에 할당하는 것이다. 본 논문에서는 케이블들을 코드별로 케이블 드럼 용량에 맞게 스케줄링 하는 자동화 프로그램을 구현하였으며, 케이블 드럼 스케줄을 위한 최적화 문제를 효과적으로 해결하기 위해 동적 계획 알고리즘을 적용하였다. 구현 결과 케이블 드럼 스케줄 자동화는 설계 규격대로 수행됨을 확인할 수 있었고, 기존방법에서 발생되는 케이블 부족 및 낭비와 같은 오류를 제거 및 케이블 드럼 스케줄 소요시간을 줄일 수 있었다. 발전소 전기설비를 위한 케이블은 최소 2만개 이상으로 설계되기 때문에 제안하는 자동화 프로그램을 적용한다면 심각한 오류 없이 케이블 드럼 스케줄의 설계 소요시간을 현저히 줄일 수 있을 것으로 사료된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1827-1829
• /
• 2002

This paper describes AC test for long delivered drum length of cable using pre-breakdown partial discharge detection(PPD) method, which can be applied to observe the causes of electrical breakdown of EHV XLPE insulation. This method is to de-energize applied voltage to cable rapidly using pre-breakdown partial discharge, and is able to prevent complete breakdown. By this effect, defects such as voids, metal particles and protrusion in cable can be observed clearly. AC resonant test set was used for PPD method. Localization of partial discharge was performed by time difference detection of the traveling wave. Accuracy of localization was 1% to the length of test cable. Through several experiments with XLPE cable, successful results of PPD method were obtained.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.1067-1069
• /
• 2004

22.9[kV]/50[MVA]/30[m] HTS transmission power cable has been developed and tested at Korea Electrotechnology Research Institute and LG Cable Company by 21 century center for applied superconductivity technology. It is necessary to measure of critical current degradations, AC loss, insulation test and etc at the HTS cable development. This paper is analyzed characteristics that critical current of HTS cable bending condition according to this paper. We will be able to decide the diameter of drum which HTS cable is wound around and minimum curvature radius of HTS cable from results of this research.

• 한국생산제조학회지
• /
• 제20권6호
• /
• pp.751-755
• /
• 2011

Electric Parking Brake(EPB) is the system operated by electric control actuator. It differs from the mechanical parking brake system which is operated by lever and pedal in need of human power. The EPB system is composed of DC motor, helical and differential epicyclic gear, screw, cables, and sensor. This paper describes about the EPB system mathematically and constructs a modeling of the EPB system using MATLAB/SIMULINK. Especially, SimMechanics library in SIMULINK is used to make each parts of system a module. By made modeling of the friction torque between bolt and nut. Cable tension can be maintained after the motor operating stops.

• 한국안전학회지
• /
• 제31권5호
• /
• pp.28-34
• /
• 2016

When a electric power cable is installed in the air for newly or exchanged working, it is necessary at all time to hold a constant tension for an overhead power cable. And also a pendanted power cable is an extreme job to have work in a high sky. For this reason, the objective of this paper developments working robot for preventing disaster that tension of cable installed automatically power cable to hold a constant. So the working robot works at all the time two tasks for mobil and tension it come into a inference between two tasks, control is difficult. Control methode needs to suppress inference of two tasks. In this paper, for installation of overhead power cable, the scheme and control methode of working robot is presented. the robot work at a same time tow tasks that have hold a constant tension of the power cable and move a constant place while unfasten a winding cable at a drum on a chassis. Working robot consist of three parts with mobile system, tension system and control part. As it is applied the feedback/feedforward control, methode of hybrid control is established to suppress that interference come into between two tasks. The simulation programs is made out using models of mobil and tension system, and a proposed controllers. In accordance with simulation, the model of each systems is discussed to make out proper. And also parameters of controllers is selected a suitable value and the driving performance of robot is evaluated.

• 한국전기전자재료학회논문지
• /
• 제28권10호
• /
• pp.670-675
• /
• 2015

Degradation diagnosis of cable is one of major issues for operation and maintenance in overhead distribution power lines. The diagnostic system for overhead power lines is composed of three parts in functional aspect - a travelling unit, a sensing unit and a communication unit. Among them, sensor detects the defects such as corrosion and disconnecting of power lines. Performance of sensor is very important, and besides, the size and structure of sensor is restricted for installation to small and lightweight diagnostic system. This paper suggests an optimal eddy current sensor best suit for small and lightweight diagnostic system in consideration of detecting performance, size and ease of installation and so on. Proposed sensor has been designed by Drum core structure and can be applied to the all domestic overhead power lines regardless of the cross-sectional areas. Also, it is showed that results of mock environmental test are satisfied.