• Proceedings of the KIEE Conference
• /
• 2008.09a
• /
• pp.218-221
• /
• 2008

Due to a variable noises in the field underground lines, clear technology of noises is very important in the diagnosis technology of partial discharge. Therefore we progressed filter test to improve the measuring test of partial discharge in a field. We applied to field test after making W-LC filter for partial discharge measurement, and then designed experimental environment such as under- ground distribution lines of field. Measuring sensor for test was UHF sensor. And we analysed those using the Lemke Probe and oscilloscope (TDS-3054, Tektro- nix). Finally, we obtained excellent data of noise decrement in the joint box of 22.9[kV] distribution lines from above experiment.

• Proceedings of the KIEE Conference
• /
• 2008.10a
• /
• pp.77-78
• /
• 2008

HVDC 케이블은 장거리 전력전송, 국가간 계통연계 비동기 전력계통연계, 전력의 시장화에 따른 전력공급 제어 필요에 따라 세계적으로 널리 사용되고 있다. 국내에서는 현재 유일하게 제주-해남간 HVDC 해저케이블이 운영 중에 있으며, 향후 제주도 안정적인 전력공급을 위하여 2011년에 제주-육지간 HVDC 해저케이블이 추가로 건설될 예정이다. 그래서 HVDC 해저 케이블의 안정적이고 신뢰성 있는 운영을 하기 위한 보수자재용 접속재 개발 및 신뢰성 평가가 필요하게 되었다. 본 논문에서는 제주-해남간 운영중인 HVDC 해저케이블 보수자재용으로 개발된 접속재에 대한 신뢰성 평가 방법으로 가장 많이 사용되고 있는 Electra 175, 189의 기계적 및 전기적 평가에 대하여 기술하고자 한다.

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1273-1275
• /
• 1998

The main faults at cable joint are mainly originate from double layered structure, which is composed of different kinds of materials such as XLPE/EPDM laminatest. In this paper, to investigate the effect of interfacial condition and coagents on dielectric strength of XLPE/EPDM, we prepared XLPE/grease/EPDM, XLPE/grease + coagent/EPDM laminates. Dielectric strength of the XLPE/EPDM laminates pasted with the grease compounded crosslinking coagent (TMPTA, TMPTMA) is higher than that of the laminates paseted with the grease without coagent.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.1
• /
• pp.89-97
• /
• 2009

In this paper, a computer software for dynamic analysis of a high mobility tracked vehicle with pre/post processor is developed. Model of a tracked vehicle is composed of chassis, turret, mount, gun, and road-wheel assembly. Track is modeled as an extensible cable and the track tensions are applied on the wheels as external forces. The system equations of motion and constraint acceleration equations are derived in the joint coordinate space using the velocity transformation method. The pre and post processors are developed using the Visual C++.

• Proceedings of the KSR Conference
• /
• 2000.11a
• /
• pp.636-651
• /
• 2000

In these days, SNCF replace the connector wire (M-T type) with a dropper has a equivalent role and function of the one in general lines of TGV, and change the connector wire (T-T-M-M-T-T, T-T-M-M-T type, etc) into a New one has more flexible cable in parallel lines (air section air joint, etc) of TGV. The Connector wire has many problems according to a flow of excessive circulation current (or traction current) and a sudden rise of temperature on catenary when electric locomotive is running in high speed. To solve the question at issue of the connector wire in high speed railway catenary system of Fiance, SNCF return their operating experience in TGV lines to design and execution of catenary system Therefore, we have to deal with the question in design and execution of catenary system for kyoungbu HSR line because we will spend a lot of time and more money for maintenance than for construction of that.

• Proceedings of the KIEE Conference
• /
• 2002.11b
• /
• pp.53-58
• /
• 2002

Sheath circulating current is increased as the change of sheath mutual impedance which is caused by imbalance of cable system, and different section length between joint box. If excessive current flows in sheath. sheath loss will be increased and then transmission capacity of underground transmission system is reduced. Accordingly, This paper proposed sheath current reduction device using resistor and reactor and proved the reduction effect of that device using EMTP/ATP. And also in this paper, when transients are occurred at the underground system with reduction device by ground fault and lightning surge. we analyzes transient effect of system variously. From this result. authors establish the protection methods of sheath circulating current reduction device.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2007.06a
• /
• pp.349-352
• /
• 2007

Estimating the physical properties of the survey area and mapping the geotechnical basement play an important role in ocean engineering and construction field. In this study, we performed marine seismic reflection and refraction survey as an engineering application at shallow marine. We made use of the dual boomer - single channel streamer as a source-receiver in reflection seismic survey and air-gun source - the manufactured OBC(Ocean Bottom Cable)-type streamer in refraction survey. In the seismic reflection data, we could easily find the geological layers and basement. Moreover, seismic refraction data could present sediment thickness and velocity distribution.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.629-640
• /
• 2008

South anchorage(AN1, Myodo side) of supension bridge between Myodo and Gwangyang is designed as rock anchorage with 36m anchor length using the resistance of rock mass in Myodo. Checking the overall stability of the anchorage, we considered rock joints, bedding planes, fault zones and condition of rock structure in situ by analysis results for photo-lineaments, aerial photograph interpretation and drill-hole logs are considered. This anchorage consists of an access shaft, adit, and the upper and lower concrete bearing plate to introduce pre-stressing force into rock mass.

• Proceedings of the KIEE Conference
• /
• 2007.04b
• /
• pp.72-74
• /
• 2007

Due to a variable noises in the field underground lines, clear technology of noises is very important in the diagnosis technology of partial discharge. Therefore we progressed filter test to improve the measuring test of partial discharge in a field. We applied to field test after making W-LC filter for partial discharge measurement, and then designed experimental environment such as underground distribution lines of field. Measuring sensor for test was UHF sensor. And we analysed those using the Lemke Probe and oscilloscope (TDS-3054, Tektronix). Finally, we obtained excellent data of noise decrement in the joint box of 22.9[kV] distribution lines from above experiment.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2277-2279
• /
• 2005

Due to a variable noises in the field underground lines, clear technology of noises is very important in the diagnosis technology of partial discharge. Therefore we progressed filter test to improve the measuring test of partial discharge in a field. We applied to field test after making W-LC filter for partial discharge measurement, and then designed experimental environment such as under-ground distribution lines of field. Measuring sensor for test was UHF sensor. And we analysed those using the Lemke Probe and oscilloscope (TDS-3054, Tektronix). Finally, we obtained excellent data of noise decrement in the joint box of 22.9[kV] distribution lines from above experiment.