• Structural Engineering and Mechanics
• /
• 제30권5호
• /
• pp.559-576
• /
• 2008

Having established the initial geometry and cable force of a typical three span suspension bridge under permanent load, the additional maximum response of the cable and the stiffening girder due to live load are determined, by means of an analytic procedure, considering the girder first hinged at its ends and then continuous through the main towers. The problem of interaction between the cable and the stiffening girder is examined taking under due consideration the second order effects, whereby, through the analogy to a fictitious tensioned beam under transverse load, a closed -form solution is achieved by means of a simple quadratic equation. It is found that the behavior of the whole system is governed by five simple dimensionless parameters which enable a quick determination of all the relevant design magnitudes of the bridge. Moreover, by introducing these parameters, a set of diagrams is presented, which enable the estimation of the influence of the geometric and loading data on the response and permit its immediate evaluation for preliminary design purposes.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.757-761
• /
• 2008

The aerostat dynamic equation of motion has been built including the tether cable dynamic effects. A numerical program to solve the derived equation of motion has been developed. The dynamic motion of the 32m aerostat has been analyzed under discrete gust and continuous turbulence. The aerostat behaviors under discrete gust which represents a deterministic approach for determining design loads for manned aircraft are solved to verify the effect of aerostat mechanical properties on the aerostat dynamic behavior. Continuous turbulences are simulated for each given altitude, translational mean wind velocity and gust intensity. Dynamic behaviors of the 32m aerostat are simulated for each continuous turbulence conditions. Translational and vertical velocity and pitching behavior and tether reaction force are monitored for each simulation.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 가을 학술발표회 논문집
• /
• pp.365-372
• /
• 2003

In this study, the program which determine the initial cable tension force by tile initial shape analysis for cable stayed bridge is developed. Also, DSFEMP(Dynamic Stochastic Finite Element Analysis Program) is developed to consider the variance of random variables at each step of dynamic response analysis, not use existing methods that apply to the theory of reliability at the final step of structural analysis. In addition, the output from the developed program was compared with the results from DMCSP(Direct Monte Carlo Simulation Program) to prove its validity.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 가을 학술발표회 논문집
• /
• pp.277-284
• /
• 2003

One of important problem, in large space structure, is to overcome the self-weight of roof structure. This problem can be solved with using tension members effectively. Thus the rapid progress of hybrid structure, that makes effective use of the means of settling, has a good effect on realizing the large space. These systems of hybrid structure have the advantages of light weight and its own internal redundancy, but are occurred unstable phenomenon such as bifurcation or snap-through buckling, when the load level is come to the critical point. Among the hybrid structure, cable dome is shown the strong nonlinearity of unstable phenomenon in accordance with the external force. Therefore, the purpose of this study is to analyze and verify comparatively the unstable phenomenon of the Geiger and Flower type cable dome structures under axismmetric load.

• 한국공작기계학회논문집
• /
• 제17권4호
• /
• pp.119-125
• /
• 2008

A new type of swivel unit is suggested in order to complement weak points of the existing. This new type of Swivel unit is developed by adopting a spring type cable which has elasticity and restoring force. To minimize the troubles in the process of manufacturing during operating the new type system, strength analysis and the check of interference between parts are accomplished with CATIA. The check of rotating performance is also carried out to determine the diameter and length of spring type cable by SimDesigner motion analysis. Swivel unit used in the robot spot welding is developed with spring type cable and its usefulness in the industrial field is verified through experiments. This system has been registered for patent.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.435-440
• /
• 2004

In this paper, the tension of assembly stay cable connected with massive anchorage block was calculated through back analysis of in-situ frequencies measured from a stadium structure. Direct approach to back analysis is adopted using the univariate method among the direct search methods as an optimization technique. The univariate method can search the optimal tension without regard to the initial ones and has a rapid convergence rate. To verify the reliability of back analysis, Tension formulas proposed by Zui et al. and Shimada were used. Tensions estimated by three methods are compared with the design tension, and are in a reasonable agreement with an error of more or less than 15%. Therefore, it is shown that back analysis applied in this paper is appropriate for estimation of cable tension force.

• 한국터널지하공간학회 논문집
• /
• 제17권1호
• /
• pp.11-23
• /
• 2015

본 연구에서는 쉴드터널의 볼트 체결 방식의 문제점을 개선하기 위해 강연선 긴장력을 이용한 새로운 세그먼트 체결 기술을 개발하였다. 현장 조립 시험시공을 통해 세그먼트 전단키가 세그먼트 틸팅 공정에서 가이드 역할을 하여 볼트 체결 방식보다 조립 시간이 더 단축되는 것을 확인하였다. 그리고 세그먼트 조립 공정의 소요공기 측정결과 볼트 체결 방식은 1개의 세그먼트 공급에서 체결까지 420초가 소요되었고, 강연선 체결 방식은 400초가 소요되었는데, 강연선 자동화 장치를 이용할 경우 기존 볼트 체결 방식에 비해 60초의 소요공기 감소효과가 있는 것으로 나타났다. 또한, BIM을 활용한 쉴드TBM 연동 강연선 자동화 시스템 모델링은 쉴드TBM 설계, 굴진 계획, 공법 프로세스 파악, 시공 관리 등에서 효과적으로 활용될 수 있을 것으로 판단된다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제27권6호
• /
• pp.172-181
• /
• 2023

본 연구에서는 케이블의 손상에 대한 사장교의 실시간 손상평가를 진행하였다. 사장교의 실시간 손상평가를 위한 센서는 가속도 센서를 사용하였으며, KEOT(Kinetic Energy Optimization Techniques)를 이용하여 센서의 위치와 수량에 대한 최적의 조건을 선정했다. KEOT는 구조물이 외력에 의해서 진동할 때, 최대변형에너지의 값을 계측하여 최적 계측 위치와 센서의 수량을 결정한다. 본 연구에서의 손상 조건은 케이블의 파단으로 제한하였으며 사장교를 4개의 구간으로 나누어 구간별 케이블 손상을 주었다. 사장교 케이블의 실시간 손상평가 방법은 FE 구조해석을 통하여 실제 모델과 유사한 가상의 모델을 만들었다. 생성된 가상 모델과 모형 구조물에 랜덤 가진파를 가한 이후 모형 구조물의 케이블 손상을 주었다. 가상 모델에서 출력되는 응답을 무손상 상태의 응답으로 정의하고 실제 모델에서 계측되는 응답을 손상 상태의 데이터로 정의하여 두 데이터를 비교하였다. 무손상 상태의 사장교의 데이터로부터 손상 상태의 사장교의 데이터를 IMD(Improved Mahalanobis Distance) 이론에 적용하여 손상의 정도를 평가하였다. IMD 이론으로 손상을 평가한 결과 구간별 손상을 실시간으로 적절하게 찾아내어 실시간 모니터링에 적용할 수 있는 유용한 손상평가 기술로 확인되었다.

• Steel and Composite Structures
• /
• 제21권1호
• /
• pp.177-194
• /
• 2016

The cable-supported ribbed beam composite slab structure (CBS) is a new type of pre-stressed hybrid structure. The standard construction method of CBS including five steps and two key phases are proposed in this paper. The theoretical analysis and experimental research on a 1:5 scaled model were carried out. First, the tensioning construction method based on deformation control was applied to pre-stress the cables. The research results indicate that the actual tensile force applied to the cable is slightly larger than the theoretical value, and the error is about 6.8%. Subsequently, three support dismantling schemes are discussed. Scheme one indicates that each span of CBS has certain level of mechanical independence such that the construction of a span is not significantly affected by the adjacent spans. It is shown that dismantling from the middle to the ends is an optimal support dismantling method. The experimental research also indicates that by using this method, the CBS behaves identically with the numerical analysis results during the construction and service.

• 한국안전학회지
• /
• 제25권3호
• /
• pp.91-99
• /
• 2010

In this study, the advanced numerical algorithm is developed which can performed the static and dynamic stochastic finite element analysis by considering the effect of uncertainties included in the member stiffness of steel cable-stayed bridges and seismic load. After conducting the linear and nonlinear initial shape analysis, the advanced numerical algorithm is the assessment tool which can performed structural the response analysis considering the static linearity and non-linearity of before or after induced intial tensile force, and examined the reliability assessment more efficiently. The verification of the developed numerical algorithm is evaluated by analyzing the regression analysis and coefficient of correlation using the direct monte carlo simulation. Also, the dynamic response characteristic and coefficient of variation of the steel cable-stayed bridge is calculated by considering the uncertainty of random variables using the developed numerical algorithm. In addition, the quantitative structural safety of the steel cable-stayed bridges is evaluated by conducting the reliability assessment based upon the dynamic stochastic finite element analysis result.