• 제목/요약/키워드: Cable Aging

검색결과 126건 처리시간 0.024초

고분자 에폭시 수지혼합물을 이용한 포장기술 연구 (A Study on Paving Technique using Polymer Epoxy Resin Materials)

  • 오승훈;김낙석;김완상
    • 대한토목학회논문집
    • /
    • 제29권2D호
    • /
    • pp.209-216
    • /
    • 2009
  • 본 연구는 내구성능이 우수한 에폭시 재료를 활용한 박층포장 공법을 개발하기 위하여 에폭시 재료의 물리적 성능을 확인하기 위한 실내시험과 에폭시 포장의 내구성능을 평가하기 위해 동결융해 및 자외선 촉진화 과정을 거친 시료에 대해 휨강도 시험과 부착강도 시험을 실시하여 포장재료로서의 공용성능을 확인하였으며, HYUNStay 사장교 구조해석 프로그램을 이용하여 제2진도대교에 에폭시 포장을 실시하는 경우를 가정하여 케이블 장력감소 및 주탑의 안정성을 일반 아스팔트 혼합물 과 비교하였다. 실험 및 해석결과 박층의 에폭시 포장재료가 기존포장면과의 부착력이 우수하고 변형과 파손에 대한 저항성 이 기존 포장재료에 비해 우수한 것으로 나타나 이를 도로현장에 적용할 경우, 공용성능 및 공용년한의 향상이 기대된다.

자동차의 블랙박스 와이어링 화재 위험성에 관한 연구 (A Study on the Fire Risk of Black Box Wiring in Motor Vehicle)

  • 강신동;김주희;최준표;김재호
    • 한국안전학회지
    • /
    • 제32권6호
    • /
    • pp.22-28
    • /
    • 2017
  • According to the National Fire Data System (NFDS), more than 5,000 vehicle fires have occurred every year for the last 10 years. Vehicle fires are primarily caused by mechanical (breaking system and engine), electrical (wiring and battery), and chemical (oil and fuel gas leakage) problems. The electrical factor has increased with the installation of driver convenience equipment. For example, today, the black box is widely used to provide video data recording of motor vehicle accidents. The black box consists of a front camera, rear camera, and wires. The black box wires are directly connected to the junction box or fuse box from the start battery that operates to provide normal on power supplying for engine stop. It is extremely dangerous when the wires short circuit due to insulation aging, mechanical and electrical stress, etc. In this study, the black box wiring fire risk have been analyzed and investigated when the steady state and abnormal operations, and under the following conditions: wiring arrangements with a high temperature condition, insulation aging, poor contact, and short circuits. The results showed that black box wiring short circuits had a higher fire risk than the other fire hazard elements. To prevent fire hazards caused by black box wiring, the black boxes must be installed by qualified service personnel. Do not modify the wiring, remove the fuse and secure the wiring using cable ties or insulation tape.

염무-열 반복 열화에 따른 실리콘 고무의 표면열화특성변화 (The change of surface degradation properties of silicone rubber for salt fog)

  • 오태승;이청;박수길;류부형
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2001년도 하계학술대회 논문집
    • /
    • pp.886-889
    • /
    • 2001
  • Silicone rubber is being used for the housing material of outdoor high voltage insulators such as composite insulator, bushing, surge arrestor and cable terminator because of good tracking and erosion resistance, good hydrophobicity and recovery of hydrophobicity and chemical stability. But, the leakge current occurs on surface of the composite polymeric insulation materials when the insulator is used for a long time with severe contaminative condition and it can lead the contamination flashover. So the leakage current is important to estimate the condition of the silicone rubber surface. In this paper, aging characteristics of silicone rubber used for outdoor insulation have been hydrophobicity of silicone rubber in salt fog chamber with average leakage current monitoring for observing the transformation of surface degradation properties of silicone rubber with different ATH(alumina trihydrate, A1$_2$O$_3$$.$3H$_2$O) filler contents. The experimental results show that a higher peak leakage current and to raise a long time for tracking with increasing amount of ATH by the salt fog and heat recycle ageing.

  • PDF

Structural monitoring and identification of civil infrastructure in the United States

  • Nagarajaiah, Satish;Erazo, Kalil
    • Structural Monitoring and Maintenance
    • /
    • 제3권1호
    • /
    • pp.51-69
    • /
    • 2016
  • Monitoring the performance and estimating the remaining useful life of aging civil infrastructure in the United States has been identified as a major objective in the civil engineering community. Structural health monitoring has emerged as a central tool to fulfill this objective. This paper presents a review of the major structural monitoring programs that have been recently implemented in the United States, focusing on the integrity and performance assessment of large-scale structural systems. Applications where response data from a monitoring program have been used to detect and correct structural deficiencies are highlighted. These applications include (but are not limited to): i) Post-earthquake damage assessment of buildings and bridges; ii) Monitoring of cables vibration in cable-stayed bridges; iii) Evaluation of the effectiveness of technologies for retrofit and seismic protection, such as base isolation systems; and iv) Structural damage assessment of bridges after impact loads resulting from ship collisions. These and many other applications show that a structural health monitoring program is a powerful tool for structural damage and condition assessment, that can be used as part of a comprehensive decision-making process about possible actions that can be undertaken in a large-scale civil infrastructure system after potentially damaging events.

Dust & Fog법을 이용한 트래킹가속열화 (Accelated Aging Test of Tracking Using the Dust & Fog Method)

  • 임장섭;이진;이정식;정우성;김태성
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1996년도 추계학술대회 논문집
    • /
    • pp.117-120
    • /
    • 1996
  • In this paper, It is tested by spraying the spoiled liquids on the materials to prove the process of tracking under the various environments. Our experiments ware examined by setting the materials in the spray chamber, and by spraying the distilled water(DW), the city water(CW), the underground water(UW), the artificial acid rain(AR) and the salt water(SW) in applied voltage 3-6[KV]. As the result, the time of tracking breakdown became shorter in the order of DW < CW < UW < AR < SW. XLPE was eroded and its anti-bracking property was very strong, but that of PVC sheath was week. Especially it was confirmed that spraying by AR and SW on the PVC sheath had a serious effect on the lifetime of cable by the tracking breakdown.

  • PDF

군집화 기법을 이용한 GIS 열화 패턴 연구 (A Study on Degradation Pattern of GIS Using Clustering Methode)

  • 이덕진
    • 한국전기전자재료학회논문지
    • /
    • 제31권4호
    • /
    • pp.255-260
    • /
    • 2018
  • In recent years, increasing electricity use has led to considerable interest in green energy. In order to effectively supply, cut off, and operate an electric power system, many electric power facilities such as gas insulation switch (GIS), cable, and large substation facilities with higher densities are being developed to meet demand. However, because of the increased use of aging electric power facilities, safety problems are emerging. Electromagnetic wave and leakage current detection are mainly used as sensing methods to detect live-line partial discharges. Although electromagnetic sensors are excellent at providing an initial diagnosis and very reliable, it is difficult to precisely determine the fault point, while leakage current sensors require a connection to the ground line and are very vulnerable to line noise. The partial discharge characteristic in particular is accompanied by statistical irregularity, and it has been reported that proper statistical processing of data is very important. Therefore, in this paper, we present the results of analyzing ${\Phi}-q-n$ cluster distributions of partial discharge characteristics by using K-means clustering to develop an expert partial discharge diagnosis system generated in a GIS facility.

배전 변압기의 통계적 기대 수명 평가 및 초기 고장제거 적정성 검토 (Distribution Transformer Statistical Expected Life Evaluation and Removal Adequacy Review)

  • 조종은;김상봉;이온유;김강식
    • KEPCO Journal on Electric Power and Energy
    • /
    • 제8권2호
    • /
    • pp.79-86
    • /
    • 2022
  • Recently, the amount of maintenance is increasing due to the aging of power facilities, but the budget is constrained. Therefore, the importance of asset management that selects replacement priorities based on the failure probability and enhances investment effects is increasing. Because the number of distribution transformers is very large, the proportion of investment cost is very high. Therefore, it is important to select the investment priority by evaluating the reliable remaining life based on the failure probability. This paper evaluates the statistical expected life using the failure data of distribution transformers for the last 11 years and the current operation data. The hazard rate of distribution transformer and MV cable was compared with each other and the adequacy of early failure removal was reviewed and the statistical expected life corresponding to the cumulative failure probability B3% was calculated.

전환 비용이 반영된 선택 기반 확산 모형을 통한 신.구 상품간 대체 및 경쟁 예측: 신.구 유료 방송서비스간 대체 및 경쟁 사례를 중심으로 (Forecasting Substitution and Competition among Previous and New products using Choice-based Diffusion Model with Switching Cost: Focusing on Substitution and Competition among Previous and New Fixed Charged Broadcasting Services)

  • 고대영;황준석;오현석;이종수
    • 마케팅과학연구
    • /
    • 제18권2호
    • /
    • pp.223-252
    • /
    • 2008
  • 본 연구에서 우리는 시장 자료가 부족한 상황에서 개인레벨과 총량레벨 모두에서 신상품들과 기존 상품들 간의 동태적 대체, 경쟁을 예측하는데 적합하도록 전환비용 요소가 포함된 신 구상품간 대체 경쟁 예측 선택기반 확산 모형을 제안하고자 한다. 추가적으로, 우리는 제안된 모형을 디지털 케이블 TV, IPTV 등이 포함된 신규 유료 양방향 방송서비스들과 기존의 아날로그 케이블 TV가 대표하는 구 유료 방송 서비스간에 벌어지는 대체 및 경쟁 예측 사례에 적용하여 본 모형의 의의를 밝히며, 또한 관련된 실증적 시사점을 도출하고자 한다. 실증 적용 결과, 유료 방송서비스 시장에 있어선 기존 상품과 전환 비용을 고려하지 않고 신상품 수요 예측을 하는 경우, 초기 확산 속도를 과대 추정하거나 왜곡된 예측 경향이 존재하여, 보다 현실적이고 보수적인 신상품 수요 예측을 위해 이들의 반영이 필요함을 밝혀, 본 연구에서 제안된 모형의 의의를 확인할 수 있었다. 또한, 제안된 모형이 S자 곡선을 미리 가정하기보다, 실증 대상의 속성이 소비자의 상태전환에 미치는 영향의 정도에 따라 유연한 형태의 총량시장 성장 곡선을 도출함을 확인하였다. 실증적으로는 여러 가격 조합에 대해 IPTV가 디지털 케이블 TV에 비해 더 선호되어 가입자 확보 면에서 우위에 있을 것임을 확인할 수 있었다. 한편, 기존 상품인 아날로그케이블 TV의 경우 열위의 서비스 속성에도 불구하고, 가격에서의 우위와 높은 전환비용의 존재로 인해 급격한 대체보다 점진적인 대체가 이루어질 가능성이 큼을 알 수 있었다.

  • PDF

양중작업 자동화를 위한 부재진동에 따른 타워크레인의 작업가능 기준 연구 (A study of Operation Criteria of Tower-crane for Automatic Transportation Considering Swung Member)

  • 신윤석;진일권;안성훈;조훈희;강경인
    • 한국건설관리학회논문집
    • /
    • 제9권2호
    • /
    • pp.108-116
    • /
    • 2008
  • 현재 건설현장에서는 인력수급의 어려움과 숙련공의 노령화의 해법으로 건설 자동화가 추진되고 있다. 특히, 건축물의 대형화 및 고층화에 따라 양중작업의 중요성이 높아지면서 작업의 효율성을 향상시킬 수 있도록 타워크레인을 대상으로 한 많은 자동화연구가 진행 중이다. 타워크레인을 이용한 양중작업의 자동화를 위해서는 부재의 관성과 풍하중에 의한 진동을 제어해야 하는데, 제어하기에 앞서 진동을 예측하는 것은 매우 어렵다. 따라서 본 연구에서는 타워크레인과 부재를 대상으로 동적 모델링을 실시하고 시뮬레이션을 통해 부재의 동적 진동을 분석하였다. 그 결과, 작업조건에 따른 발생하는 부재의 최대진동폭과 특징을 분석하였다. 그리고 분석자료를 바탕으로 부재의 특성에 따라 양중작업 자동화가 가능한 풍속기준을 판단할 수 있는 방안을 제시하였다.

원자력발전소 케이블 난연성능 검증 방법론 개선을 위한 연구 (A Study on Validation Methodology of Fire Retardant Performance for Cables in Nuclear Power Plants)

  • 이상규;문영섭;유성연
    • 한국안전학회지
    • /
    • 제32권1호
    • /
    • pp.140-144
    • /
    • 2017
  • Fire protection for nuclear power plants should be designed according to the concept of "Defense in Depth" to achieve the reactor safety shutdown. This concept focuses on fire prevention, fire suppression and safe shutdown. Fire prevention is the first line of "Defense in Depth" and the licensee should establish administrative measures to minimize the potential for fire to occur. Administrative measures should include procedures to control handling and use of combustibles. Electrical cables is the major contributor of fire loads in nuclear power plants, therefore electrical cables should be fire retardant. Electrical cables installed in nuclear power plants should pass the flame test in IEEE-383 standard in accordance with NUREG-0800, "Standard Review Plan for the Review of Safety Analysis Reports for Nuclear Power Plants". To assure the fire retardant of electrical cables during design life, both aged and unaged cable specimens should be tested in accordance with IEEE-383. It can be generally thought that the flammability of electrical cables has been increased by wearing as time passed, however the results from fire retardant tests performed in U.S.A and Korea indicate the inconsistent tendency of aging and consequential decrease in flammability. In this study, it is expected that the effective methodology for validation of fire retardant performance would be identified through the review of the results from fire retardant tests.