• Journal of Biosystems Engineering
• /
• v.43 no.4
• /
• pp.255-262
• /
• 2018

Purpose: To obtain the dynamic characteristics (spring stiffness and damping coefficient) of a rubber mount supporting a tractor cabin in order to develop a simulation model of an agricultural tractor. Methods: The KS M 6604 rubber mount test method was used to test the dynamic characteristics of the rubber mount. Of the methods proposed in the standard, the resonance method was used. To perform the test according to the standard, a base excitation test device was constructed and the accelerations were measured. Results: Displacement transmissibility was measured by varying the frequency from 3-30 Hz. The vibration transmissibility at resonance was confirmed, and the dynamic stiffness and damping coefficient of the rubber mount were obtained. The front rubber mount has a spring constant of 1247 N/mm and damping ratio of 3.27 Ns/mm, and the rear rubber mount has a spring constant of 702 N/mm and damping ratio of 1.92 Ns/mm. Conclusions: The parameters in the z-direction were obtained in this study. In future studies, we will develop a more complete tractor simulation model if the parameters for the x- and y-directions can be obtained.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.10
• /
• pp.1014-1023
• /
• 2008

Subway electric trains need to be faster for accommodation of long distance passengers. The faster run of the existing trains results in deterioration of ride quality due to noise and vibration. To reduce the noise and vibration of the electric train, a running test of the electric train was performed and an ADAMS/Rail model was set up to verify the running test results. The experimental results show that the sources of the cabin noise and vibration basically comes from the irregularity of the railroad track and the deterioration of the connection part between cabin and bogie. Consequently for mitigation of noise and vibration of the electric train, the redesign of the center pivot with softer stiffness and the minimization of rail irregularity are necessary. the frequent maintenance of the train will lead to better comport.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.10
• /
• pp.1900-1907
• /
• 2010

In this paper, a recurrent cerebellar modulation articulation control with praticle swarm optimization (PSO) method has been investigated for improvement of noise attenuation performance in active noise control system. For narrow band noise, FXLMS and RCMAC has a partial satisfactory noise attenuation. However, noise attenuation performance is poor for broad band noise and nonlinear path since it has linear filter structure. To improve this problem, a RCMAC with PSO is proposed and it is shown that satisfactory noise attenuation performance is obtained by some simulations in duct system using harmonic motor noise and KTX cabin noise as a noise source.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.15 no.4
• /
• pp.147-155
• /
• 2007

Mobile air conditioning systems work under widely changing operating conditions. To understand the system behavior under such dynamic conditions, a test facility that can impose transient loads as well as conducting dynamic measurements is needed. To test mobile air conditioning systems including their dynamic performance under various drive cycle patterns without using full scale vehicles in a wind tunnel, a new test facility, called "dynamic simulator," is described. It can replicate real vehicle operating conditions by interacting with the system being tested based on the measured system performance and subsequently adjusting the air properties returning to the test system based on the results of a numerical cabin model. A new dynamic simulator has been designed, constructed, and verified for performing dynamic tests. It was successful in controlling the temperature and relative humidity of the air returning to the test unit within ${\pm}0.7^{\circ}C$ and ${\pm}4%$ of their respective intended values. The verification test under the New European Driving Cycle demonstrated that detailed transient behavior of the mobile air conditioning system could be measured by using this dynamic simulator.

• Journal of Biosystems Engineering
• /
• v.28 no.4
• /
• pp.305-314
• /
• 2003

The ROPS of an agricultural tractor is designed to protect its driver when the tractor overturns. Although the current OECD tests to determine whether the ROPS meets the requirements of the OECD regulation are desirable, they need long time to test. We experimental time and effort by using CAE. We conducted a finite element analysis for the ROPS design of a Dae-Dong tractor cabin in an attempt to reduce the design and manufacturing time. This study shows the interpretative skill using MARC(v.2000) for designing ROPS and difference between the results of testing and FEA. Design process is generally divided into two phases: a concept and a detail design. The concept design uses simple analysis to predict structural behavior, whereas the detail design involves a finite element analysis performed by the results of the concept design. This study focused on the detail design and used Patran(v.2000r2) and MARC(v.2000) of the MSC software corporation. The model consisted of 4812 elements and 4582 nodes. Four tests. specified in the OECD standards, were performed: (1) longitudinal loading test (2) rear crushing test (3) side loading test (4), and front crushing test. Independent analyses were also performed for each test, along with a sequential analysis. When compared, the results of the independent and sequential analyses were found to be similar to the test results.

• Journal of Global Scholars of Marketing Science
• /
• v.17 no.3
• /
• pp.1-19
• /
• 2007

1. Purpose Rural tourism is made by individuals with different characteristics, needs and wants. It is important to have information on the characteristics and preferences of the consumers of the different types of existing rural accommodation. The stud aims to identify the determinants of consumer preference by type of accommodations. 2. Methodology 2.1 Sample Data were collected from 1000 people by telephone survey with three-stage stratified random sampling in seven metropolitan areas in Korea. Respondents were chosen by sampling internal on telephone book published in 2006. We surveyed from four to ten-thirty 0'clock afternoon so as to systematic sampling considering respondents' life cycle. 2.2 Two-step cluster Analysis Our study is accomplished through the use of a two-step cluster method to classify the accommodation in a reduced number of groups, so that each group constitutes a type. This method had been suggested as appropriate in clustering large data sets with mixed attributes. The method is based on a distance measure that enables data with both continuous and categorical attributes to be clustered. This is derived from a probabilistic model in which the distance between two clusters in equivalent to the decrease in log-likelihood function as a result of merging. 2.3 Multinomial Logit Analysis The estimation of a Multionmial Logit model determines the characteristics of tourist who is most likely to opt for each type of accommodation. The Multinomial Logit model constitutes an appropriate framework to explore and explain choice process where the choice set consists of more than two alternatives. Due to its ease and quick estimation of parameters, the Multinomial Logit model has been used for many empirical studies of choice in tourism. 3. Findings The auto-clustering algorithm indicated that a five-cluster solution was the best model, because it minimized the BIC value and the change in them between adjacent numbers of clusters. The accommodation establishments can be classified into five types: Traditional House, Typical Farmhouse, Farmstay house for group Tour, Log Cabin for Family, and Log Cabin for Individuals. Group 1 (Traditional House) includes mainly the large accommodation establishments, i.e. those with ondoll style room providing meals and one shower room on family tourist, of original construction style house. Group 2 (Typical Farmhouse) encompasses accommodation establishments of Ondoll rooms and each bathroom providing meals. It includes, in other words, the tourist accommodations Known as "rural houses." Group 3 (Farmstay House for Group) has accommodation establishments of Ondoll rooms not providing meals and self cooking facilities, large room size over five persons. Group 4 (Log Cabin for Family) includes mainly the popular accommodation establishments, i.e. those with Ondoll style room with on shower room on family tourist, of western styled log house. While the accommodations in this group are not defined as regards type of construction, the group does include all the original Korean style construction, Finally, group 5 (Log Cabin for Individuals)includes those accommodations that are bedroom western styled wooden house with each bathroom. First Multinomial Logit model is estimated including all the explicative variables considered and taking accommodation group 2 as base alternative. The results show that the variables and the estimated values of the parameters for the model giving the probability of each of the five different types of accommodation available in rural tourism village in Korea, according to the socio-economic and trip related characteristics of the individuals. An initial observation of the analysis reveals that none of variables income, the number of journey, distance, and residential style of house is explicative in the choice of rural accommodation. The age and accompany variables are significant for accommodation establishment of group 1. The education and rural residential experience variables are significant for accommodation establishment of groups 4 and 5. The expenditure and marital status variables are significant for accommodation establishment of group 4. The gender and occupation variable are significant for accommodation establishment of group 3. The loyalty variable is significant for accommodation establishment of groups 3 and 4. The study indicates that significant differences exist among the individuals who choose each type of accommodation at a destination. From this investigation is evident that several profiles of tourists can be attracted by a rural destination according to the types of existing accommodations at this destination. Besides, the tourist profiles may be used as the basis for investment policy and promotion for each type of accommodation, making use in each case of the variables that indicate a greater likelihood of influencing the tourist choice of accommodation.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.23 no.3
• /
• pp.299-309
• /
• 2014

When using an automotive heating, ventilation, and air conditioning (HVAC) system, we can obtain fresh outside air while maintaining the interior vehicle temperature. In this study, a correction equation considering experimental data for automotive indoor air leakage is defined to simulate the ratio of fresh air to recirculated air in the automobile cabin. With this correction equation, numerical results are compared with experimental data and validated. The $CO_2$ concentration in the automotive cabin is evaluated by considering various boarding conditions and mass flow rates of the HVAC system. The $CO_2$ concentration model derived in this study is expected to be used to control the effective air conditioning and become a basic research tool for automotive air quality control system development.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2010.04a
• /
• pp.631-632
• /
• 2010

• 한국전산유체공학회:학술대회논문집
• /
• 2002.10a
• /
• pp.88-94
• /
• 2002

Curved intakes are commonly used from commercial aircraft to military missile. Sound radiation from the intake of air vehicle affects cabin noise, community noise and military detection. In this paper, Sound radiation from curved intake is computed using the high order, high resolution scheme. The generalized characteristic boundary conditions, adaptive nonlinear artificial dissipation model and conformal mapping for high order, high resolution scheme are used. The geometric change of curved intake and the frequency of acoustic source are considered. Two dimensional Euler equations are solved for theses analyses.

• Proceedings of the Korea Society of Design Studies Conference
• /
• 1999.10a
• /
• pp.36-37
• /
• 1999

1990년대에 접어들면서 기업의 제품개발환경은 급속히 변화하였다. 디자인 설계, 시험, 프로토타입 및 생산에 이르는 순차적이고 전통적인 개발환경으로부터 디자인에서 생산까지를 CAID/CAD/CAM을 이용한 통합된 시스템으로 일관되게 진행하는 동시공학을 적용함으로써 제품의 개발기간과 비용을 단축시키고 있다. (중략)