• Economic and Environmental Geology
• /
• v.27 no.5
• /
• pp.451-458
• /
• 1994

Geochemical studies on gold-bearing quartz veins and granitic wallrocks from the Mugeug mine were carried out in order to investigate primary dispersion patterns of elements and to quantify primary dispersion widths of elements with distance from the gold-bearing quartz veins. The best fitting model of dispersion pattern in altered wallrock around the gold-bearing quartz veins is an exponential function for Au, As, Sb, $Na_2O$ and Sr, and a quadratic function for CaO, $K_2O$, MnO, Ba, Rb and Cs. The primary dispersion widths are 15~343 cm in the hanging wall, and 33~173 cm in the footwall. The width of primary dispersion in the hanging wall is twice as thick as that in the footwall mainly due to the thermal effect and volatile components. The primary dispersion width is increased as the increase of gold-bearing quartz vein width and contents of As and Sb in gold-bearing quartz veins, but is not related to Au content in gold-bearing quartz veins.

• Progress in Superconductivity
• /
• v.9 no.2
• /
• pp.140-145
• /
• 2008

We report on the Josephson vortex dynamics in $Bi_2Sr_2CaCuO_{8+\delta}$ natural Josephson junctions by c-axis tunneling measurements. Beside the quasiparticle branches in the current-voltage characteristics, a new set of multiple branches, referred to as Josephson-vortex-flow branches (JVFBs), are observed. The JVFBs emerge in an in-plane magnetic field above $H_0\;=\;{\Phi}_0/{\gamma}s^2$ and show highly hysteretic behavior, which can be explained in terms of the recently proposed dynamic-phase-separation model. In this work we examined the effect on the JVFBs by the presence of pancake vortices generated as the external magnetic field was applied slightly tilted from the in-plane direction. JVFBs were found to become larger and prominent with increasing pancake vortex density as the tilt angle increased, which were presumably caused by slowing down of a Josephson vortex lattice in the presence of pancake vortices.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.02a
• /
• pp.120-122
• /
• 2003

We jointed Bi(Pb)-Sr-Ca-Cu-O multifilament tapes and evaluated their electrical properties. In order to improve connectivity of multifilarnents, single-filament tape was inserted between two multifilament tapes or multifilament was stepped by mechanical remove. The critical current ratio (CCR) and n-value of the jointed tapes were evaluated as a function of uniaxial pressure. It was observed that CCR and n-value were 24.8-29.0% and 2.5-2.8 for lap-jointed tape. On the other hand, the corresponding values were improved to 51.8-61.9% and 2.9-5.1 for three stepped jointed tape, and 63.4-67.9% and 3.4-4.2 for double MSM lap-jointed tape, respectively. These improvements are to be due to better interconnection between filaments of two tapes.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.04a
• /
• pp.55-58
• /
• 2002

PIT method which is used at fabricating Bi-2223/Ag HTS wire includes a drawing process, conventional deformation method. Drawing of meta1(Ag) and ceramic (BiSrCaCuO) composite is also difficult and significant for uniform deformation. In this paper, parameters of uniform deformation was studied at Bi-2223/ Ag multifilamentary HTS wire. Powder and rod as a starting precursor was compared at 55 filament and 54 filament Bi-2223/Ag HTS wire, respectively. Micro-hardness and area COV of the filaments was also evaluated when the diameters were decreased through drawing operations.

• Journal of the Korean Chemical Society
• /
• v.13 no.1
• /
• pp.16-24
• /
• 1969

Ni, Co, Zn, Cd, Mn, Mg, Ca, Sr, Ba 등의2가 금속과 U(VI) 및 V(IV)의 이온이 만드는 $MCup_2$ 조성의 cupferrates 착화합물에 관하여, 그 용해도가 좋은 dioxane-$H_2O$, methanol-$H_2O$, ethanol-$H_2O$ 및 2-propanol-$H_2O$의 혼합용매를 사용하여, 그들의 몰분율을 변화시키면서 제 1, 제 2 및 전체의 열역학적인 안정도상수를 전위차적정법에 의하여 측정하고, 안정도 상수와 유기용매의 몰분율에 관한 실험식을 얻었다. 한편 분광광전법에 의하여 가능한 cupferrates의 전체 안정도 상수를 측적하여 이들과 비교하였다. 2가 금속 cupferrates의 안정도상수는 위에 적은 금속의 순서로 감소하고, 이들의 log $K_1$은 log $K_2$보다 크지만, U(VI)과 V(IV)의 cupferrates는 log $K_1$$K_2$여서 1:1과 1:2 착화합물 사이에 구조 변화가 있는듯하다. 몰분율이 영인 점에서의 안정도상수는 금속 cupferrates의 수용액에서의 용해반응의 평형상수에 해당하며, 금속의 착화합물의 안정도상수와 용해도와는 무관하고, K<$10^5$인 cupferrates에 관해서는 분광전법을 적용하기 어렵다.

• Journal of Environmental Science International
• /
• v.12 no.10
• /
• pp.1043-1054
• /
• 2003

During the period from April to September 2002, the size distributions of ambient aerosol were measured at the coastal site at Hamduk in Jeju Island. Na$\^$+/, K$\^$+/, Mg$\^$2+/, Ca$\^$2+/and Cl$\^$-/ exhibited mostly a bimodal coarse mode size distribution, while ammonium and sulfate were mainly in the fine size range, with maximum at around 0.54$\mu\textrm{m}$. The average molar concentration ratio of ammonium to sulfate for fine particles was equal to 2.0${\pm}$0.9. Nitrate was evenly found in both the coarse and fine modes. Elements like Al, Fe, Cu, Mg, Na, Ti, Sr and Mn were dominant in coarse particles, with the maximum at around 5.25$\mu\textrm{m}$. S and Pb were mainly in the submicrometer size range. Other elements with a fine and coarse modes were V, Ni, Cu, Ba and Mo. The patterns of the size distributions of trace elements measured at the downtown in Jeju City were very similar to those at the coastal site in Hamduk. However, the amplitude of size fractional concentrations at Jeju City was narrower than that at Hamduk. While the mass median diameters for the chemical species originated from the natural origin such as marine and crust were relatively large, those for ammonium, sulfate, S and Pb were very small.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.304-304
• /
• 2008

최근 이동통신의 사업의 발달로 인하여 제품의 고속신호 전달에 대한 관심이 부각되고 있다. 이로 인해 고집적 LTCC 모듈로 제작이 가능하고 고속신호 전달이 용이한 저유전율과 낮은 loss특성을 요구하는 소재 개발의 지속적인 연구를 필요로 한다. 지금까지의 ceramic/glass composite에서 주로 사용된 ceramic filler는 $Al_2O_3$로 낮은 유전율을 구현하는데 한계가 있었다. Cordierite는 낮은 유전율(${\varepsilon}r$ < 4)을 나타내는 filler로서 저유전율 기판소재로 사용될 가능성이 높지만 아직까지 보고된 결과들이 미흡한 실정이다. 선행 연구에서 cordierite filler와 $SiO_2-B_2O_3-Al_2O_3$-RO (R Zn, Sr, Ba, Ca)계의 glass를 혼합하여 LTCC 용 기판소재로서의 가능성을 확인한 결과 5.0~5.5 의 낮은 유전율과 1,000~1,500의 Q를 나타내는 것을 확인 하였다. 하지만 sheet로 제작 시 $B_2O_3$ 계로 인해 볼밀 공정에서 슬러리를 응집시켜 점도를 증가(gelation)시키는 현상이 발생하였다. 이를 개선하기 위한 glass 조성의 $B_2O_3$ 함량을 5%줄여 만든 glass를 이용해 미세구조, 유전율과 Q 그리고 강도를 측정하였다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.4
• /
• pp.218-222
• /
• 2017

In this paper, in order to develop excellent composition ceramics for a piezoelectric energy- harvesting device, we synthesized $0.99(Na_{0.52}\;K_{0.443}\;Li_{0.037})(Nb_{0.883}\;Sb_{0.08}\;Ta_{0.037})O_3$ + $0.01(Sr_{0.95}Ca_{0.05})TiO_3$ + $0.3\;wt%\;Bi_2O_3\;+\;0.3\;wt%\;Fe_2O_3\;+\;0.3\;wt%\;CuO$ (abbreviated as NKN-SCT) ceramics with different sintering times, using the ordinary solid-state reaction method. The effect of sintering time on the microstructure and piezoelectric properties was investigated. The ceramics with the sintering time of 7 h have the optimum values of the piezoelectric constant ($d_{33}$), piezoelectric voltage constant ($g_{33}$), planar piezoelectric coupling coefficient (kp), mechanical quality factor (Qm), and dielectric constant (${\varepsilon}r$): $d_{33}=314[pC/N]$, $g_{33}=20.07[10^{-3}mV/N]$, kp = 0.442, Qm = 93, ${\varepsilon}r=1,768$, all being suitable for a piezoelectric energy-harvesting device.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.169-172
• /
• 2009

We developed ultra-accelerated quantum chemical molecular dynamics and characterization simulators for study and design of plasma display panel (PDP) related materials. By use of these simulators, realistic structure of PDP materials is drawn on the computer. Furthermore, based on the structures, various properties such as secondary electron emission coefficient are successfully evaluated. In this report, we will discuss the theoretical secondary electron emission coefficient for several protecting layer materials and the effect of surface structure on the properties based on the result of atomistic simulations.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.822-824
• /
• 2000

To apply HTS to AC devices, it is necessary that study theoretically and experimentally to analyze the AC losses. It should be investigated the theoretical mechanisms precede the actual experiments. Because the AC losses cause some complicated troubles in AC machines, we can design the machines properly. In this study, firstly we analyze the basic cause of AC losses by investigating the several loss factors, secondly measure the AC losses of HTS by using Magnetization. Technique and this results show that AC losses of HTS is tenuous than those of general materials used in power system. Consequently we can compare the actual results with the theoretical results. And we find that AC losses of HTS are related to the amplitude of external magnetic field and the frequency. Through this study, we find that it is possible to apply the results by Magnetization. Technique to the AC power system, to the design of AC machine, to design of HTS proper to the foretold AC losses.