• 한국식품과학회지
• /
• 제30권1호
• /
• pp.175-183
• /
• 1998

비타민 C 고함량의 물김치를 제조하기 위한 방법의 하나로 담금수의 종류를 달리하여 지하수, 1차증류수, 3차 증류수, 생수 및 수돗물의 금속이온(Ca, Mg, Fe, K, Na, Cu) 함량을 분석하였으며, 각각의 물로 열무 물김치를 제조하여 $15^{\circ}C$에서 발효 숙성시키면서 그 담금수가 김치의 숙성지표인 pH와 산도의 변화에 미치는 영향을 밝히고, 총 비타민 C함량, 텍스쳐 및 미생물 균수의 변화를 살펴봄과 동시에 관능검사를 실시한 결과는 다음과 같았다. 각 담금수의 금속이온 함량을 측정한 결과, 전반적으로 3차 증류수가 금속이온 함량이 가장 낮은 반면 수돗물은 금속이온 함량이 가장 높았고, 특히 Cu 이온이 검출되었으며, 지하수의 Ca함량은 다른 담금수에 비해 월등히 높았다. 각 담금수로 제조한 김치국물의 pH와 산도 및 미생물의 변화는 김치시료간에 큰 차이를 보이지 않았고, 열무 줄기로 측정한 텍스쳐는 시료간에 큰 차이를 보이지 않았으나 담금 3일까지 증가하였다가 그 이후 감소하는 경향을 보였다. 한편, 총 비타민 C 함량은 3차 증류수로 제조한 김치국물의 숙성 적기 총 비타민 C함량이 7.20 mg%로 최고 함량을 나타내었고, 그 다음이 지하수로 제조한 김치로 5.72 mg%를 나타내었으며, 수돗물로 제조한 김치의 총 비타민 C 함량은 3.37 mg%로 가장 낮아 3차 증류수로 제조한 김치의 50%에 불과했다. 또한, 기호도를 조사한 결과, 3차 증류수로 제조한 김치의 기호도가 가장 높았고 그 다음이 생수로 제조한 김치였으며, 지하수로 제조한 김치의 기호도가 가장 낮았다.

• 한국재료학회지
• /
• 제8권6호
• /
• pp.520-525
• /
• 1998

활성제로 $Eu^{+2}$을 사용한 BaO-MgO-$AI_2O_3$에서 화학조성 변화에 따른 청색 형광체의 광학특성을 254nm 자외선 및 147nm의 진공자외선 하에서 측정하였다. 동 형광체는 자외선 및 진공자외선 조사를 받아 주 파장이 445nm 인 가시광선의 청색을 발하는 형광체이다. $BaMgAI_{14}O_{23}$ : Eu 농도에 따라 증가하였으며 진공자외선의 경우에는 5%농도에서 최대가 됨을 알 수 있었다. 자외선 및 진공자외선 모두에서 $BaMgAI_{10}O_{17}$형광체의 청색 발광강도는$BaMgAI_{14}O_{23}$보다 좋았다. 또한 $BaMgAI_{10}O_{17}$에서 Ba대신 Ca이나 Sr을 0.1mole 치환시킨 $Ba_{0.9}Ca_{0.1}MgAI_{10}O_{17}$과 $Ba_{0.9}Sr_{0.1}MgAI_{10}O_{17}$ 형광체로 광특성을 더욱 개선할 수 있었다.

• Environmental Analysis Health and Toxicology
• /
• 제17권4호
• /
• pp.333-339
• /
• 2002

Yellow sand (YS) storms were observed about ten times in the Korean peninsula during March and April in 2002. Twenty four hour fine particle (PM$\_$2.5/) samples were collected onto the 47 mm Teflon - coated quartz filters over 9 days during and after the events using the MiniVol Portable Air Sampler at a flow rate of 5 liters per minute. The highest PM$\_$2.5/ concentration measured during the YS period was 289 $\mu\textrm{g}$/㎥, which is 13 times higher than the lowest of the values for the samples collected during the non-yellow sand period. The filter samples were analyzed for inorganic ions using the IC, AAS and Autoanalyzer, and for metals using the ICP-MS. The results showed that the concentrations of some inorganic ions (e.g., Ca$\^$2+/ and SO$_4$$\^$2-/) and metals (e.g., Fe, Mn) of soil origin were elevated during the yellow sand events.

• 한국진공학회지
• /
• 제7권s1호
• /
• pp.50-56
• /
• 1998

Ion beam assisted deposition (IBAD) was successfully used to produce a dense and ultra-adherent Hydroxyapatite (HA) film on titanium alloy and alumina. Recently it is also proved that the HA coatings on alumina substrate treated with 20 ppm $AgNO_3$ had the structure of $(Ag, Ca)_10(PO_4)6(OH)_2$, which exhibited excellent antimicrobial effects. The present paper aims to morphlogically characterize the adhesion of macrophages on newly developed Ag-HA coated alumina and Ti6A14V substrates and to evaluate the biocompatibility of the coatings in vitro. It can be found that the cell number on alumina of the concentration of $AgNO_3$ in the treatment, the cell number on Ag-HA coatings decreased. Up to 20 ppm $AgNO_3$ by Ag-treatment, the morphological development of the cells on Ag-HA coating was similar to that of the cells on HA coating, suggesting the biotolerance of the Ag-HA coatings.

• 미생물학회지
• /
• 제30권3호
• /
• pp.171-186
• /
• 1992

Lipolytic characteristics of candia cylindracea lipase was studied by various triacylglycerols with different fatty acyl chains as substrate. The substrate was emulsified with gum arabic and the rate of hydrolysis was determined by pH stat method. The effects of gum concentration, pH, temperature, and $Ca^{2+}$ ion on the enzyme activities were examined. The results show that the effect of these factors are markedly depending on the structurla nature of substrates. The triolein was the best substrate among tested. Present study demonstrates that for characterization of lipolytic enzymes, it is critically important to select proper substrate and activator.r.

• 대한약리학회지
• /
• 제2권1호
• /
• pp.31-40
• /
• 1966

The microsomal fraction is isolated from rabbit heart and skeletal muscle. The fraction is found to contain the $Na^+$-and $K^+$-activated ATPase. The maximal ATPase activity is obtained in $Na^+$ and $K^+$ concentration of 100 mM. Calcium itself stimulates the $Na^+$-and $K^+$-activated portion of ATPase in the presence of $Mg^{++}$. However, calcium does not stimulate ATPase in the absence of $Mg^{++}$.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2006년도 춘계학술발표논문집
• /
• pp.599-601
• /
• 2006

본 논문에서는 용액의 농도가 이온교환 특성에 미치는 영향을 조사하기 위하여 농도는 $Na^+\;50$, 125, 250ppm, $Cl^-\;165$, 315, 610ppm, 입자성 물질의 유입 농도 0ppm, 유속 500ml/min, 이온교환 수지는 ROHM&HAAS IR 120 양이온 수지와 ROHM&HAAS IRA 402 음이온 수지를 사용하였다. 수지탑 배열은 혼상-혼상-음이온 수지탑 순으로, 이온교환 수지탑의 양 음이온교환 수지의 조성 비율은 1:2 로 실험한 결과 이온교환 수지탑 성능은 유입 용액 성분 및 농도에 영향을 받는 것으로 나타났다. 이온교환 수지탑 배열 순서에 따라 파과시점이 연장되며, 파과순서는 음이온의 경우 $Cl^-\;<\;NO_3\;^-\;<\;F^-$, 양이온의 경우 $Na^+\;<\;K^+\;<\;Ca^{2+}$ 순 이였으며, 용액의 농도가 증가할수록 파과시간이 단축되었다.

• 한국표면공학회지
• /
• 제36권3호
• /
• pp.263-271
• /
• 2003

Optimal conditions of electroless nickel plating in acid baths has been studied for industrial applications of a developed EN solution. The phosphorus content in the deposition ranges from 8 to $12\;wt.\%$. The investigated EN plating parameters are ion concentrations of nickel and hypophosphite, concentration of reducing and complexing agent, temperature, and pH. The average plating rate of Ni-P deposition was ca. $14{\mu}m/h$. The EN solution used shows a deposition rate of $10{\mu}m/h$ up to seven metal turnovers.

• 미생물학회지
• /
• 제26권3호
• /
• pp.237-246
• /
• 1988

The higher bacterial numbers on clay than on sand were caused by different environmental factors. Such factors affecting the adsorption of E. coli ATCC 11775 in the sediment as follows; optimal pH range for the adsorption of E. coli ATCC 11775 was pH 7.5-pH 9.5. E. coli ATCC 11775 were shown maxima in the salinity of 18.$75%_{o}$ on sand type sediment and $12.5%_{o}$ on clay type sediment. Bacteria attached better to clay typed sediment than to sand typed sediment when organic substance was eliminated. Beef extract of 0.5%-1% concentration was found to promote the attachment of E. coli ATCC 11775 effectively. Peptone of 0.5% was enganced the attachment on the clay, and peptone of 1.3%-5%, on the sand. E. coli ATCC 11775 was found to adsorb onto benthonite with the highest efficiency and on celite with the lowest efficiency. Efficiency of adsorption by inorganic ions was shown due to higher values of ion. Adsorption was achieved in the order of $Al^{3+}, Ca^{2+}, Na^{+}$.

• Environmental Engineering Research
• /
• 제11권6호
• /
• pp.318-324
• /
• 2006

The higher valence state of iron i.e., Fe(VI) was employed for the oxidation of one of an important toxic ion, cyanide in the aqueous medium. Cyanide was oxidized into cyanate, which is 1,000 times less toxic to cyanide and often accepted for its ultimate disposal. It was to be noted that Fe(VI) is a very powerful oxidizing agent and can oxidize most of the cyanide within few minutes i.e., ca 5 mins of contact. The data was obtained by the UV-Visible measurements for the Fe(VI) decomposition. The UV-Visible data was used to evaluate the overall rate constant for second order redox reaction between ferrate(VI) and cyanide. Also the pseudo first order rate constant was calculated as keeping the cyanide concentration in excess.