• 한국생산제조학회지
• /
• 제7권1호
• /
• pp.75-81
• /
• 1998

We have studied internal quality including chemical compositions, microscopic structure and nonmetallic inclusion of test materials. We have analyzed tensile strength value, hardness value, impact value etc. In analyzing internal quality, all of the test materials showed typical ferrite+pearlite structure. But nonmetallic inclusion showed oxide and sulfide inclusions in medium carbon steels, and sulfide inclusion is S-free cutting steels. In ca+ S-free cutting steels, the calcium aluminate and sulfide complex inclusion had low-melting points as deformation of sulfide and oxide inclusion is existed. It was found that tensile strength and hardness give maximum value in medium carbon steels, where as minimum in Ca + -free cutting steels. But values of elongation, reduction of area impact are reverse. Fracture surface of impact specimen is ductile in free cutting steels but brittle in medium cabon steels.

• 한국세라믹학회지
• /
• 제24권4호
• /
• pp.329-334
• /
• 1987

Diffusion of SO4-- ion in hardened cement paste with slag and siliceous powders such as silica fume and white carbon was investigated. Ca(OH)2 from hardenend cement paste was dissolved by sea-water and then gypsum was formed from the reaction of Ca++ in hardenend cement paste and SO4-- ions in MgSO4 solution. A part of the gypsum by reaction with calcium aluminate hydrates formed ettringite. Amounts of SO4-- ions passed through hardened cement paste was less than that of Cl- ions(Dcl-) in hardened cement paste were 0.1∼0.6${\times}$10-11$\textrm{cm}^2$/sec and 1∼4${\times}$10-8$\textrm{cm}^2$/sec respectively.

• 한국정밀공학회지
• /
• 제14권7호
• /
• pp.22-28
• /
• 1997

In this paper, We have studied internal quality incluiding chemical compositions, microscopic structure and nonmetalic inclusion of test material. We have analyzed dynamic characteristics of cutting resistence and compared chip treatment of the test material. In analyzing internal quality, all of the test material have typical ferrite+pearlite structure. But, nonmetallic inclusion has oxide and sulfide inclusion has oxide and sulfide inclusion in medium carbon steel, mainly sulfide inclusion is existed in S-free cutting steel. In Ca+S-free cutting steel, calcium aluminate and sulfide complex inclusion, had low-melting point, as deformation of sulfide and oxide inclusion is existed. Machining characteristics, cutting resistence is maximum in medium carbon steel. Chip treatement are excellent in S-free cutting steel, similar to the Ca+S free cutting steel and medium carbon steel.

• 자원리싸이클링
• /
• 제10권3호
• /
• pp.37-42
• /
• 2001

21세기 철강산업에 요구되는 경제성, 환경친화성, 고효율성을 동시에 만족하는 슬래그 정련조업 조건을 슬래그 엔지니어링 개념에 입각하여 평가하였다. 제선 공정의 경우, 기존의 슬래그 조성에서 염기도를 증가시킴으로써 우수한 로내 통액성 및 향상된 용선품질 확보가 가능할 것으로 평가되었으며, COREX 조업에서는 ($SiO_2$+ $A1_2$$O_3$) 농도를 소량 감소시킴으로써 보다 우수한 유동성 및 정련능 확보가 가능한 것으로 예측되었다. 한편, Stainless Steel-AOD공정의 경우, 소량의 CaO농도 증가를 통하여 현재보다 양호한 정련능 확보가 가능함을 알 수 있었으며, 슬래그 중 (CaO+$A1_2$$O_3$)농도 증가를 통해 $CaF_2$의 사용량 감소를 이룩할 수 있을 것으로 예측되었다.

• 한국세라믹학회지
• /
• 제44권3호
• /
• pp.175-181
• /
• 2007

Molecular dynamics simulation (MD) of $(62-x)CaO{\cdot}38Al_{2}O_{3}{\cdot}xBaO$ glasses has been carried out using empirical potentials with the covalent term. The simulations closely reproduce the total neutron correlation functions of glass with 5 mol% BaO and physical properties of these glasses such as elastic constants. For these glasses, aluminum is tetrahedrally coordinated by oxygen, but there is a part of five-fold and six-fold coordination of aluminum. There are no major changes to the mid-range structure of glass, as barium is substituted for calcium. To predict the barium coordination number, we have used the bond valence (BV) theory and also compared the results of simulation with Bond valence. The coordination number for oxygen around barium atoms is close to 8 and the average distance of barium and oxygen is nearly 2.80 A. The viscosity of these glasses increases with the content of barium oxide substituted for calcium oxide.

• 한국세라믹학회지
• /
• 제46권6호
• /
• pp.668-672
• /
• 2009

Heavy metal ion immobilization properties of microporous ettringite (3Ca$O{\cdot}Al_2O_3{\cdot}3CaSO_4{\cdot}32H_2$) body were examined using standard solutions of typical heavy metals. Microporous Ettringite body with desirable shape for an ionic adsorbent was obtained by the self hardening of the paste prepared from the mixture of tricalcium aluminate($C_3$A) and gypsum(CaS$O_4{\cdot}2H_2$O). Crushed grains of ettringite were soaked in each standard solutions of Pb, Co, Cd, Mn and Cr concentrated at 200 ppm. In order to evaluate the ionexchange and immobilization ability, the ionic concentration of the filtrate solution as well as the solution obtained after leaching test was measured. As a result, for the heavy metal ions excepting Cr, porous ettringite body was revealed to be excellent in ionic exchange and immobilization properties though some ions eluted at the severe condition of pH 2. The adsorption and keeping capacity for four heavy metals showed the order of $Pb{>}Co{>}Cd{>}$Mn.

• 자원리싸이클링
• /
• 제16권5호
• /
• pp.46-50
• /
• 2007

[ $Eu^{2+},\;Nd^{3+}$ ]로 도핑된 $CaAl_2O_4$ 청색 형광체를 고상반응법으로 제조하였다. 1 mol% $Eu^{2+}$로 doping된 형광체에 다양한 조성의 $Nd^{3+}$를 co-doping함에 따라 고휘도, 장잔광 특성을 보였다. 제조한 형광체에 대하여 XRD, SEM, TEM, 빛발광 특성을 조사하였다. $CaAl_2O_4:Eu^{2+}:Nd^{3+}$의 넓은 밴드의 UV로 여기된 빛발광 특성이 $Eu^{2+}$의 $4f^65d^1$에서 $4f^7$ 상태로 천이에 의해 기인된 청색영역(${\lambda}_{max}=440\;nm$)에서 관찰되었다. $Nd^{3+}$로 co-doping한 형광체는 여기광을 차단하였을 때 장잔광 발광 특성을 나타내었다.

• 자원리싸이클링
• /
• 제11권4호
• /
• pp.27-36
• /
• 2002

생활폐기물의 소각으로 발생되는 바닥재(bottom ash)로 calcium-chloroaluminate($l1CaOㆍ7Al_2$$O_3$ㆍ$CaCl_2$)가 함유된 클링커를 제조한 후 이들 클링커의 수화반응성 및 보통 포틀랜드 시멘트와 혼합 사용할 때의 압축강도 및 중금속 용출특성을 연구하였다. 시약으로 calcium-chloroaluminate를 제조한 결과. calcium-chloroaluminate는 80$0^{\circ}C$부터 생성되며, $CaSO_4$ 및 $Ca(OH)_2$ 와의 수화반응에 의해 ettringite($3CaOㆍAl_2$$O_3$ㆍ$3CaSO_4$ㆍ$32H_2$O)가 생성된다. 4 mesh 이하의 바닥재를 분쇄하지 않고 온도별로 1시간 소성한 결과, 80$0^{\circ}C$부터 calcium-chloroaluminate가 30 mesh 이하의 입도에서 합성되었다. $1,000^{\circ}C$에서 소성한 30 mesh 이하의 바닥재에 무수석고($CaSO_4$)를 10 : 6의 중량비로 혼합한 후 이들 혼합물을 보통 포틀랜드 시멘트에 3～13 wt.% 첨가하여 제조한 모르타르의 압축강도를 측정한 결과, 이들 혼합물의 치환량이 11 wt.%까지 증가됨에 따라 보통 포틀랜드 시멘트의 압축강도보다 높았다. 각 모르타르 공시체를 1 mm 이하로 분쇄하여 중금속 용출시험 결과, 용출된 중금속의 농도는 환경규제치보다 낮았다.

• 상하수도학회지
• /
• 제26권1호
• /
• pp.141-148
• /
• 2012

시멘트를 이용한 고형화/안정화의 여러 기작 중 시멘트 페이스트의 구성물인 monosulfate와 ettringite에 초점을 맞춰 이들을 각 각 합성하고 인공비소폐수에서의 비소 제거 실험을 실시했다. 소성과 중탕 과정을 거쳐 $Ca^{2+}$와 $Al^{3+}$이 mainlayer를 이루고 있으며, $SO_4^{2-}$가 interlayer에 삽입되어 있는 CaAl-monosulfate와 $Ca^{2+}$와 $Al^{3+}$가 column형태의 구조로, $SO_4^{2-}$가 channel형태로 구성되어 있는 CaAl-ettringite를 합성했다. 순수하게 합성된 시료로 1.335 mmol/L As(V) 농도의 수용액을 각각 0.054 mmol/L As(V)와 0.300 mmol/L As(V)까지 감소시켰다. PXRD와 FESEM을 이용하여 반응 전 후의 시료 결정 구조와 상 분석을 행함으로써 이온교환에 의해 인공비소폐수의 비소가 제거 된 것을 알 수 있었다.

• 한국세라믹학회지
• /
• 제17권4호
• /
• pp.217-221
• /
• 1980

Hydration of granulated blastfurnace slag-gypsum-$C_4A_3\bar{S}$ clinker/modified converter slag clinker was investigated to develop the cement of slag-gypsum system. In the hydration of granulated slag-gypsum-$C_4A_3\bar{S}$ system clinker, the hydrates such as ettringite, CSH gel and $AH_3$ gel were formed, and the strength of hardened body would be increased by forming compact microstructure. The modified converter slag clinker which contains alite and calcium aluminate was synthesized, and the hydration reactivity of the cement from this clinker, gypsum and granulated slag is similar to usual portland cement, and the hydrates were mainly CSH, ettringite, and $Ca(OH)_2$.