• Resources Recycling
• /
• v.6 no.1
• /
• pp.11-16
• /
• 1997

The extraction of aluminum from coal fly nsh wa studied using H,SO, and CaF, as leachants Aluminum was effectively extracted by HF formed &om the reaction of H,SO, and CaF, which decomposed the mullite in fly ash. The cffeas of H,SO' and CaFi concentration, reaction temperature, and reacliou time on aluminum extraction were investigated. 97% of aluminum was extracted by 4 M H:SO, and 0.5 M CaF, at 106$^{\circ}$C for 10 houci.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.26 no.2
• /
• pp.91-107
• /
• 1996

The purpose of this study was to investigate effects of osteoporosis on extraction wound healing in the calcium deficient rat. In order to carry out this study, ten-week old Wistar strain rats weighing about 300 gms were selected. When the rats reached thirteen-week old, rats' mandibular first molars were removed. The rats were then divided into three groups: Group l(rats given a normal diet both before and after tooth extraction), Group 2(rats given a low calcium diet for three weeks before tooth extraction and a normal diet after tooth extraction), and Group 3(rats given a low calcium diet for three weeks before and after tooth extraction). The healing of extraction wounds, as assessed by microradiography, autoradiography, and histopathologic examination, were compared among these three groups. The obtained results were as follows : I. In Group 1, newly formed bone and active uptake of 45Ca around extraction wound were noted on the 3rd and the 7th day. On the 14th and the 21st day, the extraction wounds of this group showed the bone trabecular formation and active 4Ca uptake in the extraction wound and alveolar crest. The more prominent bone trabeculae with a less uptake of /sup 45/Ca were noted on the 42nd day. 2. In Group 2, newly formed bone and thinning of alveolar bone trabeculae with more extensive uptake of /sup 45/Ca than that in Group 1 were noted on the 3rd and the 7th day. On the 14th day, bone trabeculae were less thicker than that in Group 1. The prominent bone trabeculae in the extraction wounds and alveolar crest were noted on the 21st and the 42nd days. 3. In Group 3, newly formed bone was noted on the 3rd and the 7th day. Alveolar bone trabeculae and uptake of /sup 45/Ca were similar to that in Group 2. On the 14th and 21st day, bone trabeculae were less thicker than that in Group 2 and Group 3. The osteoporotic change with active uptake of /sup 45/Ca was markedly noted on the 42nd day.

• Korean Journal of Environmental Agriculture
• /
• v.32 no.3
• /
• pp.171-178
• /
• 2013

BACKGROUND: Consensus of heavy metal phytoavailability in soils needs to be introduced for soil management protocols in relation to safer food production in the contaminated agricultural soils. For this, setting up the method for evaluation of metal phytoavailability in soil is an essential prerequisite. METHODS AND RESULTS: The current study was carried to select a proper single extraction method for determination of phytoavailable metal concentration in soil. Two extraction methods were examined including 1 M $NH_4NO_3$ extraction and 0.01 M $Ca(NO_3)_2$ extraction methods using 142 soil samples collected from the agricultural soils nearby abandoned mining area in Korea. Corelation analysis was conducted between phytoavailable metal concentrations and soil properties potentially influencing on the metal phytoavailability. Both methods showed similar significance (p<0.001) in correlation with soil properties such as soil pH. However, higher correlation coefficients between phytoavailable metal concentrations and soil properties were observed when used $Ca(NO_3)_2$ extraction rather than using $NH_4NO_3$ extraction. CONCLUSION(S): It appeared that 0.01 M $Ca(NO_3)_2$ extraction was better option for determination of phytoavailable metals in soils and further study to test the efficiency of this method is required in combination with plant uptake.

• Applied Chemistry for Engineering
• /
• v.29 no.1
• /
• pp.43-48
• /
• 2018

In this study, we performed various extraction condition experiments such as types and concentrations of extractants, amounts of extraction sources, pretreatment processes, to optimize the calcium ion extraction for precipitated calcium carbonate (PCC) production. CaO was used as a calcium extraction source, The extraction amount of calcium ions and the particle size of CaO were determined by ICP and SEM results. As a result, 100% calcium ion was extracted when 2 M hydrochloric acid was used as an extractant, and the optimum amount of the extraction source was 6 g. On the other hand, it was confirmed that the reaction time, reaction temperature, particle milling and heat treatment process had no significant effect on the calcium ion extraction amount.

• Applied Chemistry for Engineering
• /
• v.30 no.1
• /
• pp.34-38
• /
• 2019

A cement industrial by-product was used as a Ca source for the carbonation process. It was confirmed that the most of cement industrial by-products was composed of CaO and KCl through ICP and XRD analyses. The optimal extractant type and concentration was 1.5 M of hydrochloric acid, and the solid/liquid ratio was 0.1 g/mL. It was assumed that the cation extraction efficiency was dependent of the pair ions and their binding formation and also the solubility from extraction efficiency results by varing extractants. After extraction process, it was also confirmed that the cation could be selectively separated from the solution with respect to the kind of additives and the injection order. When NaOH was injected into the solution to control pH values ranging from 9.5 and 13, impurities and $Ca(OH)_2$ were precipitated, whereas the separated K ion was precipitated in the form of KCl under the injected $C_2H_5OH$.

• Applied Chemistry for Engineering
• /
• v.31 no.1
• /
• pp.103-107
• /
• 2020

The purpose of this study is to resource calcium ions contained in most industrial by-products, and confirm the characteristics of calcium ions by extraction and separation conditions. Calcium oxide was used as a calcium extraction source, and hydrochloric acid as an extraction solvent, and the extraction amount according to the concentration of the extraction solvent and the pH dependent characteristics of the extract were analyzed. As the extractant concentration increased, the extracted amount increased while the pH for the extraction was kept constant. In order to separate extracted calcium ions, an acid-basic solution was injected and the formation of precipitates and also the form of precipitates were analyzed. When the sulfuric acid and sodium hydroxide solution of acid and basic substances were injected into the calcium extract, precipitates were formed and separated into CaSO₄ and Ca(OH)₂ forms.

• Journal of the Korean Ceramic Society
• /
• v.19 no.1
• /
• pp.19-23
• /
• 1982

The technique to determine the components in the supersulphated slag cement is discussed by several selective extraction analyses. Accordingly, the rate of hydration reaction of supersulphated slag cement could be quantitatively measured by the following 3 kinds of the selective extraction analyses. (1) Determination of unreacted slag - a salicylic acid, acetone.methanol solution (2) Determination of free $CaSO_4$ - a half saturated lime water (3) Determination of free $Ca(OH)_2$ - glycerine.alcohol solution

• Proceedings of the Membrane Society of Korea Conference
• /
• 2004.05a
• /
• pp.179-182
• /
• 2004

This study reports the extraction behavior of $\alpha$-lactalbumin using bis(2-ethylhexyl) sulfosuccinate sodium (AOT) reverse micelles. Forward extraction of $\alpha$-lactalbumin in the reverse micellar organic phase from aqueous feed solutions was strongly dependent on the AOT concentration and the complete forward extraction of 0.03 mM $\alpha$-lactalbumin was successfully achieved at an AOT concentration of ca. 100 mM. A similar dependency of the forward extraction on the AOT concentration was obtained in isooctane, n-hexane, and n-octane systems. In the backward extraction from the micellar organic phase, the recovery of the protein as high as ca. 90% was obtained with pH control and/or salt addition.

• Resources Recycling
• /
• v.26 no.1
• /
• pp.37-42
• /
• 2017

It has been reported that aqueous indirect carbonation process of calcium silicate mineral could be one of the most promising methods for $CO_2$ sequestration. The process consists of two main steps, extraction of Ca from calcium silicate and carbonation of the extracted solution by $CO_2$. Many types of acids such as HCl and $HNO_3$ can be used in the extraction step of the process. In the case of using aqueous acetic acid solution as the extraction solvent, acetic acid can be reproduced at the carbonation step of the extracted solution by $CO_2$ and recycled to extraction step for reuse it. Industrial by-products such as iron and steel slags are potential raw materials of the indirect carbonation process due to their high contents of calcium silicate. In this study, in order to examine the extraction efficiency of domestic electric arc furnace steel slag by aqueous acetic acid solution, extraction experiments of the slag were performed by using the aqueous acetic acid solutions of varying extraction conditions ; acetic acid concentrations, extraction temperatures and times.

• Resources Recycling
• /
• v.22 no.1
• /
• pp.64-71
• /
• 2013

Mineral carbonation has been proposed as a possible way for $CO_2$ sequestration. The electric arc furnace slags consist of calcium, magnesium and aluminum silicates in various combinations. If they could be used instead of natural mineral silicates for carbonation, considerable energy savings and $CO_2$ emissions reductions could be achieved. Indirect aqueous carbonation of the slags consists of two steps, extraction of calcium and carbonation. Acetic acid leaching of electric arc furnace slags had been already studied to extract Ca in them, but it was reported that the carbonation of the extracted $Ca^{2+}$ in the leached solution would suffer from too slow kinetics, even at high pressure of $CO_2$. In this work, to develop more efficient extraction of the electric arc furnace slags, hydrochloric acid leaching to separate calcium from them was studied, and the results were compared with the acetic acid ones. The phase boundary between $Ca^{2+}$ and $CaCO_3$ in the solution with pH was determined by thermodynamic calculations. Hydrochloric acid was more effective than acetic acid for the extraction of Ca in electric arc furnace slag, and there is a possibility to recycle an unreacted hydrochloric acid in the leached solution by electrolysis or evaporation.