• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.1
• /
• pp.17-24
• /
• 2018

Polar fomat algorithm (PFA) was derived from medical imaging theory, known as back projection, to process synthetic aperture radar(SAR) data. The difference between the operating condition of SAR and back projection assumption makes two distortions. First, the focusing performance of PFA is degraded in proportion to distances from the scene center. Second, the geometric accuracy in SAR images is distorted. Several methods were introduced to mitigate the distortions, but some disadvantages, such as the geometric discontinuity, are arisen when sub-images are combined. This paper proposes the novel method to compensate the geometric distortion with chirp Z-transform (CZT). This method corrects precisely the geometric errors without any problems, because a whole image can be processed all at once.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.6
• /
• pp.111-117
• /
• 2002

The high quality and a nearly stoichometric growth of $Cd_{1-y} Zn_y$/Te(y＝0.04) epilayers have been successfully grown on GaAs substrate by hot wall epitaxy (HWE) by optimizing the growth condition including the preheating treatment and Cd reservoir temperature. The relationship between quality and thickness was examined and best value of FWHM from X-ray rocking curve of 121 arcsec are obtained. Also, emission peaks related to the recombination of free excitons such as the ground state and the first excited state were observed in the PL spectrum at 4.2K. The ($A^0$, X) emission related to Cd vacancy and deep level emission was not measured. These results indicated that the grown CZT/GaAs epilayer was high qualify and purity.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.3
• /
• pp.331-337
• /
• 2018

The decommissioning of nuclear power plants is generally executed in five steps, including preparation, decontamination, cutting/demolition, waste disposal and environmental restoration. So, for efficient decommissioning of nuclear power plants, worker safety, effects compared to cost, minimization of waste, possibility of reuse, etc., shall be considered. Worker safety and measurement technology shall be secured to exert optimal efficiency of nuclear power plant decommissioning work, for which accurate measurement technology for systems and devices is necessary. Typical In-Situ methods for decommissioning of nuclear plants are CZT, Gamma Camera and ISOCS. This study used ISOCS, which can be applied during the decommissioning of a nuclear power plant site without collecting representative samples, to take measurements of the S/G Water Chamber. To validate the measurement values, Microshield and the GEANT4 code was used as the actual method were used for modeling, respectively. The comparison showed a difference of $1.0{\times}10^1Bq$, which indicates that it will be possible to reduce errors due to the influence of radiation in the natural environment and the precision of modeling. Based on the research results of this paper, accuracy and reliability of measurement values will be analyzed and the applicability of the direct measurement method during the decommissioning of NPPs will be assessed.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.18 no.2
• /
• pp.217-225
• /
• 2020

Concrete waste accounts for approximately 70~80% of the total waste generated during the decommissioning of nuclear power plants (NPPs). Based upon the concentration of each radionuclide, the concrete waste from the decommissioning can be used in the determination of the clearance threshold used to classify waste as radioactive. To reduce the cost of radioactive concrete waste disposal, it is important to perform decontamination before self-disposal or limited recycling. Therefore, it is necessary to estimate the internal radioactivity distribution of radioactive concrete waste to ensure effective decontamination. In this study, the performance metrics of various Compton reconstruction algorithms were compared in order to identify the best strategy to estimate the internal radioactivity distribution in concrete waste during the decommissioning of NPPs. Four reconstruction algorithms, namely, simple back-projection, filtered back-projection, maximum likelihood expectation maximization (MLEM), and energy-deconvolution MLEM (E-MLEM) were used as Compton reconstruction algorithms. Subsequently, the results obtained by using these various reconstruction algorithms were compared with one another and evaluated, using quantitative evaluation methods. The MLEM and E-MLEM reconstruction algorithms exhibited the best performance in maintaining a high image resolution and signal-to-noise ratio (SNR), respectively. The results of this study demonstrate the feasibility of using Compton images in the estimation of the internal radioactive distribution of concrete during the decommissioning of NPPs.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.407.2-407.2
• /
• 2016

Cu2ZnSnS4 (CZTS) 박막은 낮은 가격과 유리한 특성을 가지므로서 차세대 박막 태양전지에서 이상적인 흡수층 물질 중 하나로 여겨지고 있다. 우리는 CZTS 박막 태양전지를 합성하는 데 있어서 Zn와 ZnS를 전구체에 사용하여 이에 따른 특성 차이를 연구하였다. 열처리 한 박막은 Zn와 ZnS를 사용하였을 때 특성 차이를 조사하기 위하여 여러 분석을 진행하였다. CZTS 박막의 미세구조와 조성 분포, 전기적 특성을 살펴보았다. Zn를 사용한 CZTS 박막은 큰 입자크기와 더 적은 영역에서 Zn가 집중되어 있는 층을 가진다. CZTS와 Mo 경계인 이 영역에 ZnS 2차상이 존재함을 의미하며 Zn 타겟을 사용하였을 때 더 낮은 Zn 조성을 가지는 것을 확인하였고 이는 결과적으로 접합 특성의 향상을 가져온다. 제작 된 CZTS 태양 전지 소자에서 이러한 이유로 Zn를 사용하였을 때 5.06%로 ZnS를 사용하였을 때에 비하여 더 높은 효율을 얻을 수 있었다.

• Journal of Radiation Protection and Research
• /
• v.26 no.3
• /
• pp.275-279
• /
• 2001

In uranium enrichment plants and nuclear fuel fabrication facilities, exact measurement of fissile isotope enrichment of uranium is required for material accounting in international safeguards inspection as well as process quality control. The purpose of this study was to develop a simple measurement system which can portably be used at nuclear fuel fabrication plants especially dealing with low enriched uranium. For this purpose, a small size CZT (CdZnTe) detector was used, and the detector performance in low uranium gamma/X -rays energy range was investigated by use of various enriched uranium oxide samples. New enrichment measurement technique and analysis method for low enriched uranium oxide, so-called, 'semi-peak ratio technique' was developed. The newly developed method was considered as an alternative technique for the low enrichment and would be useful to account nuclear material in safeguarding activity at nuclear fuel fabrication facility.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.379-381
• /
• 2002

A single CdZnTe detector is tested for suitability in a prototype CT/ SPECT system designed to acquire both emission and transmission data. The detector has the size of 1${\times}$l-cm$^2$ with 4${\times}$4 1.5${\times}$l.5mm$^2$ pixellated anodes. Since the detector is smaller than imaged object, we translated it in an arc centered at the x-ray tube to image larger objects. Pulse counting electronics with very short shaping time (50 ns) are used to satisfy high photon rates in x-ray imaging, and response linearity up to 3${\times}$10$\^$5/ counts per second per detector element is achieved. The energy resolution of 122-keV gamma-ray is measured to be 14%. We have characterized the system performance by scanning a radiographic resolution phantom .and the Hoffman brain phantom. The spatial resolution of CT and SPECT are about 1 mm and 7 mm, respectively.

• Journal of Radiation Protection and Research
• /
• v.47 no.1
• /
• pp.39-49
• /
• 2022

Background: For proper monitoring of the eye lens dose, an appropriate calibration factor of a dosimeter and information about the mean energies of X-rays are indispensable. The scattered X-ray energy spectra should be well characterized in medical practices where eye lenses of medical staffs might be high. Materials and Methods: Scattered X-ray energy spectra were experimentally derived for three different types of X-ray diagnostic and therapeutic equipment, i.e., the computed tomography (CT) scan, the angiography and the fluoroscopy. A commercially available CdZnTe (CZT) spectrometer with a lead collimator was employed for the measurement of scattered X-rays, which was performed in the usual manner. Results and Discussion: From the obtained energy spectra, the mean energies of the scattered X-rays lied between 40 and 60 keV. This also agreed with that obtained by the conventional half value layer method. Conclusion: The scattered X-rays to which medical workers may be exposed in the region around the eyes were characterized by means of spectrometry. The obtained mean energies of the scattered X-rays were found to match the flat region of the dosimeter response.

• Progress in Medical Physics
• /
• v.27 no.3
• /
• pp.105-110
• /
• 2016

Sparse angular sampling has been studied recently owing to its potential to decrease the radiation exposure from computed tomography (CT). In this study, we investigated the analytic reconstruction algorithm in sparse angular sampling using the sinogram interpolation method for improving image quality and computation speed. A prototype of the spectral CT system, which has a 64-pixel Cadmium Zinc Telluride (CZT)-based photon-counting detector, was used. The source-to-detector distance and the source-to-center of rotation distance were 1,200 and 1,015 mm, respectively. Two energy bins (23~33 keV and 34~44 keV) were set to obtain two reconstruction images. We used a PMMA phantom with height and radius of 50.0 mm and 17.5 mm, respectively. The phantom contained iodine, gadolinium, calcification, and lipid. The Feld-kamp-Davis-Kress (FDK) with the sinogram interpolation method and Maximum Likelihood Expectation Maximization (MLEM) algorithm were used to reconstruct the images. We evaluated the signal-to-noise ratio (SNR) of the materials. The SNRs of iodine, calcification, and liquid lipid were increased by 167.03%, 157.93%, and 41.77%, respectively, with the 23~33 keV energy bin using the sinogram interpolation method. The SNRs of iodine, calcification, and liquid state lipid were also increased by 107.01%, 13.58%, and 27.39%, respectively, with the 34~44 keV energy bin using the sinogram interpolation method. Although the FDK algorithm with the sinogram interpolation did not produce better results than the MLEM algorithm, it did result in comparable image quality to that of the MLEM algorithm. We believe that the sinogram interpolation method can be applied in various reconstruction studies using the analytic reconstruction algorithm. Therefore, the sinogram interpolation method can improve the image quality in sparse-angular sampling and be applied to CT applications.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.25-25
• /
• 2010

Cu(In, Ga)$Se_2$ (CIGS), $CuInS_2$ (CIS) 등의 Se, S계 화합물 박막 소재를 활용한 태양전지는 높은 광흡수 계수, 상대적으로 높은 효율, 화학적 안정성, 도시적인 미관 등으로 인하여 최근 부각되고 있다. 하지만 CIGS, CIS 등의 Se, S계 박막 소재는 상대적으로 매장량이 적은(희유 원소) In, Ga을 사용하고 있는 약점이 있으며 특히 In의 경우는 LCD Display에 사용되는 ITO 필름으로 인해 가격이 상승하고 있다. 따라서 결정질 실리콘 태양전지의 경험에서와 같이 생산량의 급증에서 기인하는 소재 부족 문제를 미연에 방지하고 안정적인 성장을 이루기 위해서는 희유 원소인 In과 Ga을 저가 범용원소로 대체 하는 기술을 추가적으로 개발해야 한다. $Cu_2ZnSnS_4$ (CZTS) 박막 태양전지는 Se, S계 태양전지에서 III 족 원소인 In, Ga을 II-IV 원소인 Zn와 Sn으로 대체하는 기술로 기존의 CIGS계 태양전지가 보유하고 있는 장점을 유지하면서 저가 태양전지를 구현할 수 있는 대체 물질로 최근 많은 관심을 받고 있다. CZTS 박막 태양전지 관련 세계 기술동향 조사에 따르면, 최근 2008년에 일본 Nagaoka 대학의 Katagiri 그룹에서 스퍼터를 이용하여 제조한 CZTS 박막 태양전지의 최고 효율이 6.77%가 됨을 보고하였고, 2010년 초에는 IBM에서 스핀코팅법을 이용하여 제조한 CZT(S, Se) 박막 태양전지의 효율을 9.66%까지 올릴 수 있음을 Advanced Materials에 보고하였다. 본 발표에서는 우선 CZTS 박막태양전지 제조 및 특성 분석 관련 개요 및 세계 기술 개발 동향 분석 결과를 설명할 것이다. 또한 본 실험실, 에너지 기술 연구원 및 KIST, 영남대 등 국내에서 진행되고 있는 CZTS 관련 기술 개발 현황에 대하여 설명할 것이다.