• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.8
• /
• pp.41-47
• /
• 2017

With the introduction of new technologies, ground weapons have led to the development of artificial intelligence and the attention of major developed countries. In this study, CFD was performed through the BLU-103 model to obtain aerodynamic data for aircraft that are subjected to rotational motion. To simulate the steady-state of a rotating body, the body was fixed and the principle of rotating the body by rotating the surrounding air was used. In order to examine the aerodynamic feasibility of the rotating aircraft, the analysis was carried out at intervals of $30^{\circ}$ angle from $0^{\circ}$ to $90^{\circ}$ for the simple shape and the side slip angle. It was confirmed that the drag coefficient for the simple model satisfies the quantitative results of 1.0 ~ 1.2 through CD presented in "Drag Book". The aerodynamic data was constructed by applying the valid input verified through the simple type analysis conditions to the actual shape, and the tendency was analyzed. The analysis confirmed that CX, CZ and CY increase not only in the simple model but also in the rotation of the actual model. Especially, the influence of CZ was judged to have contributed to the flight.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.8 no.2
• /
• pp.273-286
• /
• 1997

Objective：This study was designed to evaluate effects of methylphenidate(MPH) on event-related potentials(ERP) and continuous performance test(CPT) in attention-deficit hyperactivity disorder (ADHD) and to see the correlation between changes in ERP and changes in performance. Method：ERP and CPT were used to examine the acute effects of MPH(0.5mg/kg) in eleven ADHD boys(89-103 months old). Results：1) After MPH administration, P3 latency to nontarget stimuli at Fz was significantly decreased (p<0.01) and P2 amplitudes to target stimuli at Pz and at Oz and P3 amplitude to target stimuli at Cz were significantly increased(p<0.05). 2) Commission error and omission error in the CPT-X and commission error in the CPT-AX were decreased(p<0.01), and hits and perceptual sensitivity(d') in the CPT-X and d′ in the CPT-AX were increased(p<0.01). 3) The change of P3 latency to nontarget stimuli at Fz and the change of d′ in the CPT-X were negatively correlated(p<0.05), and the change of P2 amplitude to target stimuli at Pz and d′ in the CPT-AX were positively correlated(p<0.05). Conclusion：MPH improves change orienting reaction, the delivery of task relevant information, accuracy and perceptual sensitivity in ADHD. And the increase of ability to discriminate targets from non-targets reflects reduced evaluation time in large memory component task and enhanced change orienting reaction in simple task.

• Korean Journal of Pharmacognosy
• /
• v.49 no.4
• /
• pp.312-321
• /
• 2018

Recently, consumer demand for functional cosmetics containing natural ingredients has been greatly expanded. To develop the natural cosmetic materials, we selected 3 plants, Chrysanthemum zawadskii Herbich (CZ), Perilla frutescens (L.) Britton var. acuta Kudo (PF), and Rosa multiflora Thunberg (RM) which showed high total flavonoid contents (TFC), total polyphenol contents (TPC), and strong DPPH radical scavenging effect. We determined astragalin, chlorogenic acid, and rosmarinic acid as a marker compound for quantitative analysis of the content of each material and standardization of the quality standards and manufacturing standards through LC/MS analysis. HPLC-DAD was used to simultaneously analyze these marker components of three natural product complexes (Mix) and to validate the analytical method through experiments such as linearity, accuracy and precision. The detection wavelengths were set at 210, 265, and 330 nm. The detected 3 compounds from extract of CZ, PF, RM showed significant linearity ($R^2${\geq_-}$0.9947). The limit of detection (LOD) of chlorogenic acid, astragalin and rosmarinic acid were $8.29{\mu}g/ml$, $2.28{\mu}g/ml$, and $27.00{\mu}g/ml$, respectively. The limit of quantification (LOQ) of chlorogenic acid, astragalin and rosmarinic acid were $25.11{\mu}g/ml$, $6.92{\mu}g/ml$, and $81.83{\mu}g/ml$, respectively. The contents of the three indicators of Mix were 19.82-24.71 mg/g of chlorogenic acid, 43.80-46.02 mg/g of astragalin, and 46.33-48.57 mg/g of rosmarinic acid.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.1
• /
• pp.29-38
• /
• 2024

The Matched Field Processing (MFP) is an estimation method for a source range and depth based on the prediction of sound propagation. However, as the frequency increases, the prediction inaccuracy of sound propagation increases, making it difficult to estimate the source position. Recently proposed, the Frequency-Difference Matched Field Processing (FD-MFP) is known to be robust even if there is a mismatch by applying a frequency-difference autoproduct extracted from the auto-correlation of a high frequency signal. In this paper, in order to evaluate the performance of the FD-MFP using a horizontal line array, simulations were conducted in the environment of the East Sea of Korea. In the area of Bottom Bounce (BB) and Convergence Zone (CZ) where detection of a sound source is possible at a long range, and the results of localization were analyzed. According to the the FD-MFP simulations of horizontal line array, the accuracy of localization is similar or degraded compared to the conventional MFP due to diffracted field and mismatch of sound speed. There was no clear result from the simulations conforming that the FD-MFP was more robust to mismatch than the conventional MFP.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.444-445
• /
• 2009

The metallic contact system of silicon solar cell must have several properties, such as low contact resistance, easy application and good adhesion. Ni is shown to be a suitable barrier to Cu diffusion as well as desirable contact metal to silicon. Nickel monosilicide(NiSi) has been suggested as a suitable silicide due to its lower resistivity, lower sintering temperature and lower layer stress than $TiSi_2$. Copper and Silver can be plated by electro & light-induced plating method. Light-induced plating makes use the photovoltaic effect of solar cell to deposit the metal on the front contact. The cell is immersed into the electrolytic plating bath and irradiated at the front side by light source, which leads to a current density in the front side grid. Electroless plated Ni/ Electro&light-induced plated Cu/ Light-induced plated Ag contact solar cells result in an energy conversion efficiency of 16.446 % on $0.2\sim0.6\;{\Omega}{\cdot}cm$, $20\;\times\;20\;mm^2$, CZ(Czochralski) wafer.

• Korean Journal of Materials Research
• /
• v.2 no.1
• /
• pp.52-57
• /
• 1992

The macro defects of $LiNbO_3$ crystals grown by the Czochralski method were strongly influenced by the single crystal growth parameters such as growth rate, thermal gradient and crystal rotation rate. The optimum growth conditions of a $LiNbO_3$ single crystal with 1" in diameter were $70~100^{circ}C/cm$ temperature gradient, 5~10 mm/hr growth rate and 40 rpm crystal rotation rate. In these conditions, we could grow crystals which had no cellular structure with easy diameter control, and any crack was not formed after the crystal was cooled.oled.

• New & Renewable Energy
• /
• v.2 no.2 s.6
• /
• pp.4-8
• /
• 2006

Reduction of optical losses in crystalline silicon solar cells by surface modification is one of the most important issues of silicon photovoltaics. Porous Si layers on the front surface of textured Si substrates have been investigated with the aim of improving the optical losses of the solar cells, because an anti-reflection coating and a surface passivation can be obtained simultaneously in one process. We have demonstrated the feasibility of a very efficient porous Si AR layer, prepared by a simple, cost effective, electrochemical etching method. Silicon p-type CZ (100) oriented wafers were textured by anisotropic etching in sodium carbonate solution. Then, the porous Si layer were formed by electrochemical etching in HF solutions. After that, the properties of porous Si in terms of morphology, structure and reflectance are summarized. The surface morphology of porous Si layers were investigated using SEM. The formation of a porous Si layer about $0.1{\mu}m$ thick on the textured silicon wafer result in an effective reflectance coefficient Reff lower than 5% in the wavelength region from 400 to 1000nm. Such a surface modification allows improving the Si solar cell characteristics.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.7
• /
• pp.616-621
• /
• 2009

Reduction of optical losses in crystalline silicon solar cells by surface modification is one of the most important issues of silicon photovoltaics. Porous Si layers on the front surface of textured Si substrates have been investigated with the aim of improving the optical losses of the solar cells, because an anti-reflection coating(ARC) and a surface passivation can be obtained simultaneously in one process. We have demonstrated the feasibility of a very efficient porous Si ARC layer, prepared by a simple, cost effective, electrochemical etching method. Silicon p-type CZ (100) oriented wafers were textured by anisotropic etching in sodium carbonate solution. Then, the porous Si layers were formed by electrochemical etching in HF solutions. After that, the properties of porous Si in terms of morphology, structure and reflectance are summarized. The structure of porous Si layers was investigated with SEM. The formation of a nanoporous Si layer about 100nm thick on the textured silicon wafer result in a reflectance lower than 5% in the wavelength region from 500 to 900nm. Such a surface modification allows improving the Si solar cell characteristics. An efficiency of 13.4% is achieved on a monocrystalline silicon solar cell using the electrochemical technique.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.295-298
• /
• 2007

Reduction of optical losses in crystalline silicon solar cells by surface modification is one of the most important issues of silicon photovoltaics. Porous Si layers on the front surface of textured Si substrates have been investigated with the aim of improving the optical losses of the solar cells, because an anti-reflection coating(ARC) and a surface passivation can be obtained simultaneously in one process. We have demonstrated the feasibility of a very efficient porous Si ARC layer, prepared by a simple, cost effective, electrochemical etching method. Silicon p-type CZ (100) oriented wafers were textured by anisotropic etching in sodium carbonate solution. Then, the porous Si layers were formed by electrochemical etching in HF solutions. After that, the properties of porous Si in terms of morphology, structure and reflectance are summarized. The structure of porous Si layers was investigated with SEM. The formation of a nanoporous Si layer about 100nm thick on the textured silicon wafer result in a reflectance lower than 5% in the wavelength region from 500 to 900nm. Such a surface modification allows improving the Si solar cell characteristics. An efficiency of 13.4% is achieved on a monocrystalline silicon solar cell using the electrochemical technique.

• Electrical & Electronic Materials
• /
• v.10 no.10
• /
• pp.1041-1047
• /
• 1997

In this paper the dielectric properties of (0.8-x)Pb(Mb$_{1}$3//Nb/2/3)O$_3$/BaTiO$_3$-CaZrO$_3$(x=0.1, 0.15, 0.2, 0.25) ceramics were investigated. Specimens were prepared by the conventional mixed oxide method and sintering temperature and time were 1000~115$0^{\circ}C$ 2hr, respectively. The structural and dielectric properties with variation of sintering temperature and composition were investigated. All the specimens sintered at 115$0^{\circ}C$ for 2hr showed the highest value of 1043. With increasing the contents of CZ and frequency dielectric constant was decreased and which was decreased with increasing temperature from 3$0^{\circ}C$ to 15$0^{\circ}C$.