• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1998년도 PROCEEDINGS OF THE 15TH KACG TECHNICAL MEETING-PACIFIC RIM 3 SATELLITE SYMPOSIUM SESSION 4, HOTEL HYUNDAI, KYONGJU, SEPTEMBER 20-23, 1998
• /
• pp.1-20
• /
• 1998

Processing of thin films by chemical vapor deposition (CVD) is accompanied by chemical reactions, in which the rigorous kinetic analysis is difficult to achieve. In these conditions, thermodynamic calculation leads to better understanding of the CVD process and helps to optimise the experimental parameters to obtain a desired product. A CVD phase diagram has been used as guide lines for the process. By determining the effect of each process variable on the driving force for deposition, the thermodynamic limit for the substrate temperature that diamond can deposit is calculated in the C-H system by assuming that the limit is defined by the CVD diamond phase diagram. The addition of iso-supersaturation ratio lines to the CVD phase diagram in the Si-Cl-H system provides additional information about the effects of CVD process variables.

• 한국진공학회지
• /
• 제7권s1호
• /
• pp.167-170
• /
• 1998

To apply diamond films in microelectromechanical systems(MEMS), it is necessary to develop the patterning technologies of diamond films in the micrometer scale. In this paper, three different kinds of technologies for patterning CVD diamond films carried out by us were demonstrated: selective growth by improved diamond nucleation in DC bias-enhanced microwave plasma chemical vapor deposition (MPCVD) system, selective growth of seeding using diamond-particle-mixed photoresist, and selective etching of oxygen ion beam using Al as the mask. It was show that high selectivity and precise patterns had been achieved, and all the processes were compatible with IC process.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 C
• /
• pp.786-788
• /
• 1998

Synthetic diamond films were deposited on pretreated silicon substrate in activated gas phase using RF plasma-assisted CVD. We investigated the influence of $O_2$ gas on facets of diamond crystal. In $H_2-CH_4-O_2$ gas mixture, the increase of oxygen concentration lead to well-faceted diamond particles and increasing crystallinity of diamond films. The deposited diamond films were analyzed by SEM, XRD, Raman spectroscopy.

• 한국전기전자재료학회논문지
• /
• 제11권7호
• /
• pp.552-556
• /
• 1998

Diamond thin films were deposited on Si substrate using $CH_4 and H_2$mixed gas by RF plasma CVD. Prior to deposition, the substrate surface was mechanically scratched with the diamond paste of $3{\mu}m$ to improve the density of nucleation sites. The microstructure of diamond films deposited with methane(0.5%~2%) at the reaction pressure ranging from 20 torr to 50torrr were studied by a scanning electron microscope. It was observed in the deposited diamond films that the nucleation density decreased and crystallinity increased with decreasing the methane concentration. However, the nucleation density and crystallinity were decreased with decreasing the process pressure.

• 한국산업융합학회 논문집
• /
• 제23권1호
• /
• pp.25-32
• /
• 2020

Generally, high-temperature, high-pressure, high-priced sintering equipment is used for diamond sintering, and conductivity is a problem for improving the surface modification of the sintered body. In this study, to improve the efficiency of diamond sintering, we identified a new process and material that can be sintered at low temperature, and attempted to develop a composite thin film that can be discharged by doping boron gas to improve the surface modification of the sintered body. Sintered bodies were sintered by mixing Si and two diamonds in different particle sizes based on CIP molding and HIP molding. In CVD deposition, CVD was performed using WC-Co cemented carbide using CH₄ and H₂ gas, and the specimen was made conductive using boron gas. According to the experimental results of the sintered body, as the Si content is increased, the Vickers hardness decreases drastically, and the values of tensile strength, Young's modulus and fracture toughness greatly increase. Conductive CVD deposited diamond was boron deposited and discharged. As the amount of boron added increased, the strength of diamond peaks decreased and crystallinity improved. In addition, considering the release processability, tool life and adhesion of the deposition surface according to the amount of boron added, the appropriate amount of boron can be confirmed. Therefore, by solving the method of low temperature sintering and conductivity problem, the possibility of solving the existing sintering and deposition problem is presented.

• 한국결정학회:학술대회논문집
• /
• 한국결정학회 2002년도 정기총회 및 추계학술연구발표회
• /
• pp.20-20
• /
• 2002

Based on experimental and theoretical analyses, we suggested a new possibility that the CVD diamond films grow not by the atomic unit but by the charged clusters containing a few hundreds of carbon atoms, which form spontaneously in the gas phase [J. Crysta] Growth 62 (1996) 55]. These hypothetical negatively-charged clusters were experimentally confirmed under a typical hot-filament diamond CVD process. Thin film growth by charged clusters or gas phase colloids of a few nanometers was also confirmed in Si and ZrO₂ CVD and appears to be general in many other CVD processes. Many puzzling phenomena in the CVD process such as selective deposition and nanowire growth could be explained by the deposition behavior of charged clusters. Charged clusters were shown to generate and contribute at least partially to the film deposition by thermal evaporation. Origin of charging at the relatively low temperature was explained by the surface ionization described by Saha-Langmuir equation. The hot surface with a high work function favors positive charging of clusters while that of a low work function favors negative charging.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제16회 학술발표회 논문개요집
• /
• pp.165-165
• /
• 1998

• 한국세라믹학회지
• /
• 제27권3호
• /
• pp.401-411
• /
• 1990

Deposition of diamond films on Si(100) from the mixtures of methane and hydrogen were investigated using hot W filament CVD method. The nucleation density could be increased thousandfold by surface treatment with SiC powder. Upon oxygen addition to the mixture, crystal facets became developed more clearly by selectively removing non-diamond carbons, but the film growth rate generally decreased. However, at a very high methane content(e.g. 10%), a small amount of oxygen addition has resulted in an increase in the film deposition rate presumably by promotion of methane decomposition. When the gas pressure was varied, the growth rate exhibited a maxiumum at around 20torr and the film crystallinity steadily improved with the pressure increase. The observed variation of the growth rate by oxygen addition was discussed in terms of its role in the pyrolysis and the subsequent gas phase reactions.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1992년도 추계학술대회 논문집
• /
• pp.102-105
• /
• 1992

Using RF plasma CVD the diamond particles and films were deposited on Si and quartz substrate from $CH_4$-$H_2$ mixed gas. The temperature of substrate was uniformly maintained by inserting matal plate between substrate and substrate holder. As a result, the deposited diamond particles were mainly twins. The deposited diamond films were identified by SEM, XRD and Raman spectroscopy.

• 한국재료학회지
• /
• 제5권6호
• /
• pp.732-742
• /
• 1995

다이아몬드 증착시 기판의 표면처리를 변화시켰을 때 다이아몬드의 핵생성 밀도에 미치는 영향에 대하여 연구하였다. 실험장치는 열 필라멘트 CVD 장치를 사용하였고, 반응가스로 메탄과 수소가스를 사용하였다. 기판의 표면 처리는 탄소 상을 기판에 증착시키는 방법, Soot에 의한 기판 표면처리, 혹연에 의한 기판 표면처리로 크게 3가지로 행하였다. 모든 경우에 핵생성 밀도가 증가하였으나 탄소 상을 증착시킨 경우와 soot에 의한 사전처리의 경우의 핵생성 밀도의 증가가 혹연에 의한 처리보다 더 현저하였다. 또한 탄소강의 증착의 경우 표면에 굴곡이 없는 매우 평탄하고 균일한 다이아몬드 막을 얻을 수 있었다. 사전증착처리 한 기판에 탄소 층을 형성시켰을 때 탄소 층과 기판과의 접착력이 약한 것을 이용하여 다이아몬드 막을 쉽게 분리시켜 free standing 다이아몬드 박막을 얻을 수 있음을 알았다.