• 한국재료학회지
• /
• 제8권11호
• /
• pp.1067-1073
• /
• 1998

CO와 $H_2$의 탄소원을 사용한 마이크로파 플라즈마 화학기상증착 방법으로 SOD 구조에 적용될 양질의 다이아몬드 박막을 형성하였고, SOD 구조를 형성하기 위해 diamond/Si(100) 구조 위에 poly-Si 박막을 저압화학기상 증착법으로 제작하였다. CO/$H_2$탄소원의 유량비 증가에 따라 다이아몬드의 결정은 octahedron 구조에서 cubo-octahedron 구조로 바뀌었으며, 결정면은 {111}과 {100}으로 혼합되어 형성되었다. 비정질 carbon과 non-diamond성분이 없는 양질의 다이아몬드 박막은 CO/$H_2$의 유량비가 0.18일 때 형성되었으며, 주 결정상은 (111) 면이었다. diamond/Si(100) 계면은 void가 없는 평활한 계면을 이루었으며, 다이아몬드 박막의 유전상수, 누설전류와 비저항은 각각 $5.31\times10^{-9}A/cm^2$ 그리고 $9\times{10^7}{\Omega}cm$이었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.147-152
• /
• 2002

A new theory of thin film growth was suggested, where charged clusters of nanometer size are generated in the gas phase and are a major flux for thin films. The existence of these hypothetical clusters was experimentally confirmed in the diamond and silicon CVD processes as well as in metal evaporation. These results imply new insights as to the microstructure control of thin films. Based on this new understanding, the low temperature deposition of crystalline and amorphous silicon can be approached systematically.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1999년도 PROCEEDINGS OF 99 INTERNATIONAL CONFERENCE OF THE KACG AND 6TH KOREA·JAPAN EMG SYMPOSIUM (ELECTRONIC MATERIALS GROWTH SYMPOSIUM), HANYANG UNIVERSITY, SEOUL, 06월 09일 JUNE 1999
• /
• pp.115-127
• /
• 1999

The charged clusters or particles, which contain hundreds to thousands of atoms or even more, are suggested to form in the gas phase in the thin film processes such as CVD, thermal evaporation, laser ablation, and flame deposition. All of these processes are also used in the gas phase synthesis of the nanoparticles. Ion-induced or photo-induced nucleation is the main mechanism for the formation of these nanoclusters or nanoparticles inthe gas phase. Charged clusters can make a dense film because of its self-organizing characteristics while neutral ones make a porous skeletal structure because of its Brownian coagulation. The charged cluster model can successfully explain the unusual phenomenon of simultaneous deposition and etching taking place in diamond and silicon CVD processes. It also provides a new interpretation on the selective deposition on a conducting material in the CVDd process. The epitaxial sticking of the charged clusters on the growing surface is gettign difficult as the cluster size increases, resulting in the nanostructure such as cauliflowr or granular structures.

• 한국전기전자재료학회논문지
• /
• 제11권8호
• /
• pp.607-612
• /
• 1998

RF HPCVD(Helicon Plasma Chemical Vapor Deposition) has been successfully constructed for diamond thin films. The system consists of plasma generation tube, deposition chamber, pumping lines for gas system. A mixture of $CH_4 and H_2$is used for reaction. Two thermocouples, a quartz tube surrounded by a RF antenna and a magnet, and a high temperature heater were set up in the deposition chamber. The process for the thin film diamond deposition has been carried put in a high vacuum system at a substrate temperature of $800^{\circ}C$, and pressure of 5 mtorr. It is also demonstrated. that the RF HPCVD system has advantages for controlling deposition parameters easily.

• 열처리공학회지
• /
• 제33권1호
• /
• pp.25-32
• /
• 2020

In this study, the tribology of laser patterned DLC thin film was studied. DLC thin films were coated by RF-PECVD to improve the durability of tungsten carbide (WC) materials. DLC thin films have high hardness and low friction characteristics. Dot and line patterning was processed on the surface of DLC thin film with femtosecond laser, and the coefficient of friction was improved. As a result of ball on disk abrasion test, the hardness and friction coefficient of DLC thin films were much better than that of WC material. The friction coefficient of DLC thin film with dot patterning and line patterning showed better results. The excellent performance of the laser patterned DLC coating is appeared to reduce the coefficient of friction due to the reduction of surface contact area.

• 한국결정성장학회지
• /
• 제14권1호
• /
• pp.27-32
• /
• 2004

RF-PECVD 방법을 이용하여 DLC(diamond-like carbon)박막을 메탄-수소 가스 혼합비 및 바이어스 전압에 따라 실리콘 웨이퍼 위에 증착하였다. DLC 박막의 결합구조적 특성 및 기계적 성질은 FT-IR, Raman, 그리고 nano-indenter를 이용하여 평가하였다. 혼합가스내 메탄의 유량과 바이어스 전압이 증가함에 따라 증착속도가 증가하였다. 박막내 탄소의 $sp^3/sp^2$ 결합비와 경도는 반응가스내 수소의 유량 및 바이어스 전압이 증가함에 따라 증가하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.289-292
• /
• 1998

The methastable state diamond films have been deposited on Si substrates using MWPCVD. Effects of each experimental parameters of MWPCVD including CH$_4$ concentrations, Oxygen additions, Operating pressure, deposition time, etc. on the growth rate and crystallinity were investigated. The best crystallinity of the finn at 3% methane concentration addition of oxygen to the CH$_4$-$H_2O$ mixture gave an improved film crystallinity at 50% oxygen concentration. Upon increasing the operating pressure and time, the growth rate and crystallinity were increased simultaneously.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.395-400
• /
• 2005

Nano-scale fabrication of silicon substrate based on the use of atomic force microscopy (AFM) was demonstrated. A specially designed cantilever with diamond tip, allowing the formation of damaged layer on silicon substrate by a simple scratching process, has been applied instead of conventional silicon cantilever for scanning. A thin damaged layer forms in the substrate at the diamond tip-sample junction along scanning path of the tip. The damaged layer withstands against wet chemical etching in aqueous KOH solution. Diamond tip acts as a patterning tool like mask film for lithography process. Hence these sequential processes, called tribo-nanolithography, TNL, can fabricate 2D or 3D micro structures in nanometer range. This study demonstrates the novel fabrication processes of the micro cantilever and diamond tip as a tool for TNL using micro-patterning, wet chemical etching and CVD. The developed TNL tools show outstanding machinability against single crystal silicon wafer. Hence, they are expected to have a possibility for industrial applications as a micro-to-nano machining tool.

• 한국정밀공학회지
• /
• 제23권8호
• /
• pp.39-46
• /
• 2006

Nano-scale fabrication of silicon substrate based on the use of atomic force microscopy (AFM) was demonstrated. A specially designed cantilever with diamond tip, allowing the formation of damaged layer on silicon substrate by a simple scratching process, has been applied instead of conventional silicon cantilever for scanning. A thin mask layer forms in the substrate at the diamond tip-sample junction along scanning path of the tip. The mask layer withstands against wet chemical etching in aqueous KOH solution. Diamond tip acts as a patterning tool like mask film for lithography process. Hence these sequential processes, called tribo-nanolithography, TNL, can fabricate 2D or 3D micro structures in nanometer range. This study demonstrates the novel fabrication processes of the micro cantilever and diamond tip as a tool for TNL using micro-patterning, wet chemical etching and CVD. The developed TNL tools show outstanding machinability against single crystal silicon wafer. Hence, they are expected to have a possibility for industrial applications as a micro-to-nano machining tool.

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2003년도 추계정기총회 및 국제심포지엄
• /
• pp.181-184
• /
• 2003

본 연구에서는 열 필라멘트 화학증착 방법에 의한 나노 다이아몬드 박막 증착을 위해 핵 생성 밀도를 증가시키기 위해서 다이아몬드 특성을 갖는 탄소(Diamond-Like Carbon)박막들을 연속 및 펄스 플라즈마를 이용한 화학 증착법에 의하여 증착하여 그 특성을 SEM, XPS, Raman 및 Nano-Tester를 이용하여 분석하였으며 열 필라멘트 화학 증착법에 의하여 나노 다이아몬드 박막 형성에 대한 핵 밀도와 다아이몬드 특성을 갖는 탄소 박막의 특성의 연관성을 관찰하여 공구(WC-Co)의 표면 사전 처리 없이 나노 다이아몬드 박막 형성을 용이하게 하는 실험을 수행하였다.