• Journal of Korea Foundry Society
• /
• v.13 no.4
• /
• pp.333-341
• /
• 1993

The effects of alloying elements on the structure and mechanical properties of compacted/vermicular graphite cast irons containing copper, tin and molubdenum for producing pearlite matrix, and also containing phosphorus and boron for increasing wear resistance, were investigated. The Brinell hardness and ultimate tensile strength of the specimens with the range of compositions, [1.5% Cu-0.05% Sn-(0.2-0.4)% Mo-(0.2-0.6)% P-(0.035-0.070)% B], was found to fall within in the following range, depending on their composition; Brinell hardness of BHN 250-315, ultimate tensile strength of $28.1-40.3kg/mm^2$. It was also found within this experiment that CV graphite cast irons possessing higher amount of phosphide eutectic exhibit better wear resistance, but the wear resistance became deteriorate when the area fraction of phosphide eutectics exceed more than 10%. From these experimental results, it could be concluded that the CV graphite cast iron containing 1.5% Cu, 0.05% Sn, 0.4% Mo, 0.2% P and 0.035% B showed good mechanical and wear resistance properties.

• Journal of Biosystems Engineering
• /
• v.43 no.4
• /
• pp.420-425
• /
• 2018

Purpose: Chemical fertilizers contribute to agricultural productivity. Annually, 450,000 tons of chemical fertilizers are used in Korea, which is 268 kg per hectare (MAFRA, 2016). However, excessive use causes problems such as environmental pollution and soil acidification. This study proposes use conditions for a fertilizer distributor that can reduce excessive fertilization by analyzing distribution patterns. Methods: This study analyzed fertilizer application uniformity according to the number of blades on a centrifugal fertilizer distributor (three or four blades), orifice gate open ratio (50 or 100%), and blade rotation speed (400, 500, or 600 rpm). Results: When using four blades, the coefficient of variation (CV) was lower than when using three by 11-13% points, and the CV using the 50% open ratio was 10-30% points lower than using the 100% open ratio. The CV at 500 rpm blade rotating speed was 9-12% points lower than that for 400 and 600 rpm. Conclusions: The CV with four blades, 50% orifice gate open ratio, and 500 rpm of blade rotating speed was 18.4%, which provided the most uniform fertilization.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.27 no.3
• /
• pp.66-78
• /
• 2014

Objectives: The purpose of this study is to investigate the relationship between vasomotor symptoms with upper-lower body temperature differences, and to identify Kidney Deficiency pattern (腎虛證) in menopausal women. Methods: 51 women who visited Kangnam Kyung-Hee Oriental Hospital from July to December, 2013 were analyzed. The experimental group consisted of 30 patients reported with vasomotor symptoms (Vasomotor symptom group, VG), while the control group consisted of 21 patients without vasomotor symptoms (Control group, CG). According to their chief complaints, VG was further divided into VHG (vasomotor-hot flash group) and VCG (vasomotor-cold hypersensitivity group). The temperature differences between upper and lower body part (CV17-CV4), proximal and distal extremity part (LU4-HT8, ST32-LR3) were checked. All patients reported other complaints such as headache, sweating, anxiety, dyspepsia, leukorrhea, which belong to Kidney Yang Deficiency pattern (腎陽虛證) or Kidney Yin Deficiency pattern (腎陰虛證). The relationship between vasomotor symptom and repetition rate of additional complaints were analyzed. Results: Statistical analysis showed that lower abdomen temperature of experimental group was lower than the control group. Temperature differences of upper and lower body (CV17-CV4) was significantly larger in vasomotor symptom group. VHG had more symptoms of sweating, chest discomfort, constipation, which belong to Kidney Yang Deficiency pattern group. VCG had more symptoms of leukorrhea, diarrhea, and dyspepsia, which belong to Kidney Yin Deficiency pattern group. Conclusions: Climacteric women who suffered from vasomotor symptoms showed lower temperature tendency in [CV4], larger temperature differences in [CV17-CV4] compared to the control group. Among them, VHG showed more symptoms of Kidney Yin Deficiency pattern, whereas VCG showed more symptoms of Kidney Yang Deficiency pattern.

• Korean Journal of Plant Resources
• /
• v.17 no.2
• /
• pp.94-101
• /
• 2004

Commercial value of soybean sprouts should be affected by their morphology including the lateral roots. This study was carried out to determine the effect of benzyladenopurine (BA) concentration on growth and morphology of soybean sprouts in order to compare them with the selling products collected from the markets. Four cultivars (cv. Eunhakong, Pungsannamulkong, Sowonkong, and Junjery) were cultured for 6 days after imbibed for 5 hours into different BA solutions (0, 1,2,4, and 8 ppm). On the 6th day, hypocotyl length was measured to calculate the composition rate of ＞ 7 cm (A), 4 to 7 cm (B), ＜ 4 cm (C) and non-germination (D), and the ratio of hypocotyl to root length (H/R ratio) on the base of hypocotyl length as well as lateral root, hypocotyl diameter, and fraction fresh and dry weights. The composition rates classified with hypocotyl length showed big differences between 4 cultivars in class A and C; Class A, in which cv. Sowonkong and Junjery had higher rates than cv. Eunhakong and Pungsannamulkong, was decreased with BA concentration of higher than 4 ppm, but class C showed the reverse result to class A. Any lateral root was not formed in higher than 4 ppm BA solutions although fewer in cv. Pungsannamulkong and Junjery than in the two other cultivars. Hypocotyl and root lengths were decreased with increased BA concentrations, and in all BA concentration, hypocotyl length of cv. Junjery was the longest. Hypocotyl diameter, hypocotyl and total fresh weights were thicker and heavier in 2 to 4 ppm BA concentrations than in the other ones, although in case of BA application, cv, Eunhakong and Sowonkong were heavier. The H/R ratios were increased with increased BA concentration. The ratios of nearly all the selling products ranged from 1 to 2 ppm when compared to them from our experiment.

• Journal of Food Hygiene and Safety
• /
• v.26 no.1
• /
• pp.70-75
• /
• 2011

A new and improved analytical method involving alkaline pyridine extraction was proposed to quantity chlorophyll contents in syrup and candy type chlorella products. The performance of analytical method was compared with the conventional Korea food standard method which involves acetone extraction. The application of sonication chlorophyll extraction form alkaline pyridine sample was also explored. The analytical procedure was validated by evaluating accuracy, precision and reproducibility. For liquid samples, the pyridine extraction method showed higher accuracy and precision compared to acetone extraction method. The CV values of pyridine extract method and the acetone extraction method were 18.82 and 40.0, and the accuracy to theoretical values were 106.3% and 78.1%, respectively. When sonication extraction method was applied to the pyridine extraction, the precision was improved as indicated by reduced CV values from 18.82 to 11.36. The improved performance of pyridine-sonication extraction was also validated by recovery test of chlorophyll that was previously spiked into the sample matrix. For solid matrix, the pyridine extraction method showed better performance in analysis of chlorophyll in solid food matrix (CV = 7.05) compared to conventional acetone extraction method (CV = 30.0). However, the accuracy to theoretical values of pyridine and acetone extraction methods only showed only 62.7% an 40%, respectively. The relatively low accuracy of pyridine extraction method (62.7%) was improved to 99.4% by applying additional sonication extraction method. The improved performance of applying additional sonication extraction was validated by standard deviation, CV values and accuracy to theoretical values.

• Journal of Acupuncture Research
• /
• v.18 no.4
• /
• pp.201-204
• /
• 2001

Objective : This study was to report a clinical trial in which acupuncture treatmnt on 會陰(Huiyin, CV1) was effectively applied to a patient who had suffered from teasing pruritus ani for 38 years. pruritus ani was thought to be initiated by dystonia. Methods : The acupoint, 會陰(Huiyin, CV1) was selected, because needling on perineal muscles was mainly used to alleviate pelvic pain or pruritus ani in the light of MPS(Myofascial Pain Syndrome) theory, on which 會陰(Huiyin, CV1) was located and also had pelvic pain and pruritus ani in its indications. On the acupoint, the following maneuver was used. (1) Make a patient stand and bend forward (2) Insert a needle on 會陰(Huiyin, CV1) (3) Repeat lifting and pushing (4) Draw a needle immediately without retaining needle on the acupoint Results : The patient with Pruritus ani recovered after above treatment two times and had no recurrence up to Feb. 2001. Conclusion : In this study, Needling on 會陰(Huiyin, CV1) proved to be effective in the aspect of MPS and acupuncture treatment as well, but more clinical trials are expected to follow this study.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.1
• /
• pp.291-297
• /
• 2018

In this paper, we present an automatic image object tracking system for Studio cameras on the stage. For object tracking, we use the OpenCV-based Python program using PC, Raspberry Pi 3 and mobile devices. There are many methods of image object tracking such as mean-shift, CAMshift (Continuously Adaptive Mean shift), background modelling using GMM(Gaussian mixture model), template based detection using SURF(Speeded up robust features), CMT(Consensus-based Matching and Tracking) and TLD methods. CAMshift algorithm is very efficient for real-time tracking because of its fast and robust performance. However, in this paper, we implement an image object tracking system for studio cameras based CMT algorithm. This is an optimal image tracking method because of combination of static and adaptive correspondences. The proposed system can be applied to an effective and robust image tracking system for continuous object tracking on the stage in real time.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.26 no.2
• /
• pp.43-47
• /
• 2022

Purpose Radioimmunoassay implement quality control by systematizing the internal quality control system for quality assurance of test results. This study aims to contribute to the quality assurance of radioimmunoassay results and to implement systematic quality control by measuring the average CV of internal quality control and external quality control by plenty of institutions for reference when setting the laboratory's own acceptable range. Materials and Methods We measured the average CV of internal quality control and the bounce rate of more than 10.0% for a total of 42 items from October 2020 to December 2021. According to the CV result, we classified and compared the upper group (5.0% or less), the middle group (5.0~10.0%) and the lower group (10.0% or more). The bounce rate of 10.0% or more was compared by classifying the item of five or more institutions into tumor markers, thyroid hormones and other hormones. The average CV was measured by the overall average and standard deviation of the external quality control results for 28 items from the first quarter to the fourth quarter of 2021. In addition, the average CV was measured by the overall average and standard deviation of the proficiency results between institutions for 13 items in the first half and the second half of 2021. The average CV of internal quality control and external quality control was compared by item so we compared and analyzed the items that implement well to quality control and the items that require attention to quality control. Results As a result of measuring the precision average of internal quality control for 42 items of six institutions, the top group (5.0% or less) are Ferritin, HGH, SHBG, and 25-OH-VitD, while the bottom group (≤10.0%) are cortisol, ATA, AMA, renin, and estradiol. When comparing more than 10.0% bounce rate of CV for tumor markers, CA-125 (6.7%), CA-19-9 (9.8%) implemented well, while SCC-Ag (24.3%), CA-15-3 (26.7%) were among the items that require attention to control. As a result of comparing the bounce rate of more than 10.0% of CV for thyroid hormones examination, free T4 (2.1%), T3 (9.3%) showed excellent performance and AMA (39.6%), ATA (51.6%) required attention to control. When comparing the bounce rate of 10.0% or more of CV for other hormones, IGF-1 (8.8%), FSH (9.1%), prolactin (9.2%) showed excellent performance, however estradiol (37.3%), testosterone (37.7%), cortisol (44.4%) required attention to control. As a result of measuring the average CV of the whole institutions participating at external quality control for 28 items, HGH and SCC-Ag were included in the top group (≤10.0%), however ATA, estradiol, TSI, and thyroglobulin included in bottom group (≥30.0%). Conclusion As a result of evaluating 42 items of six institutions, the average CV was 3.7~12.2% showing a 3.3 times difference between the upper group and the lower group. Cortisol, ATA, AMA, Renin and estradiol tests with high CV will require continuous improvement activities to improve precision. In addition, we measured and compared the overall average CV of the internal quality control, the external quality control and the proficiency between institutions participating of six institutions for 41 items excluding HBs-Ab. As a result, ATA, AMA, Renin and estradiol belong to the same subgroup so we require attention to control and consider setting a higher acceptable range. It is recommended to set and control the acceptable range standard of internal quality control CV in consideration of many things in the laboratory due to the different reagents and instruments, and the results vary depending on the test's proficiency and quality control materials. It is thought that the accuracy and reliability of radioimmunoassay results can be improved if systematic quality control is implemented based on the set acceptable range.

• Korean Journal of Plant Tissue Culture
• /
• v.27 no.6
• /
• pp.469-474
• /
• 2000

Effect of the antibiotic carbenicillin on callus and shoot formation from the leaf disc culture of tobacco (Nicotiana tabacum L. cv. BY-4) was examined. The number of shoot induced from the leaf explants was decreased as the amount of carbenicillin increased from 250 mg/L to 2,000 mg/L on MS medium containing 0.5 mg/L of BAP or kinetin. In addition, calli formation from the leaf explants was increased by the treatment of 250 mg/L ∼ 500 mg/L carbenicillin with or without 0.5 mg/L of 2,4-D or NAA. However, the fresh weight of 4-week-cultured explants was decreased with increasing carbenicillin from 250 mg/L to 2,000 mg/L on MS medium containing 0.5 mg/L of 2,4-D or NAA. These results indicate that carbenicillin has an auxin-like effect, such as promoting callus formation and inhibiting shoot induction. It leads to the conclusion that the auxin-like property should be taken into account for the production of transgenic plants via Agrobacterium-mediated transformation.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.4
• /
• pp.834-837
• /
• 2017

A distinct double-stranded RNA (dsRNA) cryptic virus, named spinach cryptic virus 1 (SpCV1), was identified from spinach transcriptome datasets. The SpCV1 genome has two dsRNA genome segments. The larger dsRNA1 has an open reading frame for a conserved RNA-dependent RNA polymerase (RdRp). The smaller dsRNA2 encodes a putative coat protein (CP). The sequence identity of SpCV1 RdRp and CP to the closest cryptic virus is 81% and 60%, respectively. Phylogenetic analysis indicates that SpCV1 is a novel member of the genus Alphapartitivirus (family Partitiviridae).