• Proceedings of the Safety Management and Science Conference
• /
• 2009.11a
• /
• pp.15-24
• /
• 2009

Cycling that transform human energy into mechanical energy is one of the man-machine systems out of sports fields. Benchmarking means " improving ourselves by learning from others ", therefore benchmarking toward dominant cyclist is necessary on field. the goals of this study were to provide important factors on multi-disciplines (kinematics, physiology, power, psychology) for a tailored-training program that is suitable to individual characteristics. Two cyclist participated in this study and gave consent to the experimental procedure. one was dominant cyclist (years:21 yrs, height:177 cm, mass:70 kg), and the other was non-dominant cyclist(years:21, height:176, mass:70). Kinematic data were recorded using six infrared cameras (240Hz) and QTM (software). Physiological data (VO2max, AT) were acquired according to graded exercising test with cycle ergometer and power with Wingate test used by Bar-Or et. al ( 1977) and to evaluate muscle function with Cybex. Psychological data were collected with competitive state anxiety inventory (CSAI-2) that were devised by Martens et. al (1990) and with athletes' self-management questionnaire (ASMQ) of Huh (2003). It appears that the dominant's CV(coefficient of variability) was higher than non-dominant's CV in Sports Biomechanics domain, that the dominant's values for all factors ware higher than non-dominant's values in physical, and physiological domain, and their values between cognitive anxiety and somatic anxiety were contrary to each other in psychology. Further research on multi-disciplines may lead to the development of tailored-optimal training programs applicable with key factors to enhance athletic performance by means of research including athlete, coach and parents.

• Phonetics and Speech Sciences
• /
• v.2 no.4
• /
• pp.119-127
• /
• 2010

Recently, we have launched a large-scale articulatory study to investigate how the three-way contrastive stops (i.e., lenis, fortis, and aspirated) in Korean are kinematically expressed (i.e., in terms of articulatory movement characteristics) in various contexts, using a magnetometer (Electromagnetic Articulography). In this paper, we report some preliminary results about how the three-way bilabial series /p,$p^h,p^*$/ produced in /Ca/ context in isolation are kinematically characterized not only during the lip closure but also during the following vocalic articulation. Some important notes could be made from the results. First, the degree of lip constriction (as measured by the lip aperture between the upper and lower lips) was smaller for the lenis /p/ and larger for the fortis/aspirated /$p^*,p^h$/, showing a two-way distinction during the closure. Second, the tongue lowering for the following vowel was more extreme after the lenis /p/ than after the fortis/aspirated /$p^*,p^h$/. Regarding this vocalic articulatory difference in the tongue height, we discussed the possibility that the articulatory tension associated with the fortis/aspirated stops is further reflected in the lingual vocalic movement maintaining the tongue position to a certain level for the following vowel /a/, while the lenis consonant does not impose such articulatory constraints, resulting in more tongue lowering. Finally, the temporal relationship between the release of the stop closure and the lowest tongue position of the following vowel remained constant, suggesting that CV coordination is invariantly maintained across the consonant type. This pattern was interpreted as supporting the view that the consonant and vowel gestures are coordinated in much the same way across languages.

• Research in Plant Disease
• /
• v.12 no.2
• /
• pp.125-128
• /
• 2006

Downy mildew caused by Pseudoperonospora cubensis (Berkeley & Curtis) occurred on the cotyledon of gourd (Lagenaria leucantha cv. Sambokkkul) and scion of watermelon (cv. FR couple) in commercial nursery around Jinju city, Gyeongnam province in Korea in 2005 and 2006. The disease symptoms usually started with water-soaking lesions on cotyledon and then the infected leaves became withered and eventually died. The sporangia of the pathogen were one-celled, ovoid to ellipsoid in shape, pale grayish in color, and $20{\sim}32{\times}14{\sim}18{\mu}m$ in size. Sporangiophores were errect, branched, and $140{\sim}380{\times}4{\sim}8{\mu}m$ in size. Pathogenicity of the causal organism was proved according to artificial inoculations. Although the virulence of the causal fungus on the host plants was not strong, it produced typical symptoms. The causal organism was identified as Pseudoperonospora cubensis (Berkeley & Curtis) based on the mycological characteristics of the fungus and pathogenicity. This is the first report on downy mildew of watermelon caused by P. cubensis in Korea.

• Applied Chemistry for Engineering
• /
• v.33 no.2
• /
• pp.210-215
• /
• 2022

Two types of lignin materials with a different surface ionic character were used and polypyrrole layer was introduced on the lignin surface to obtain polypyrrole@lignin and polypyrrole@lignosulfonate composites using a simple chemical oxidation polymerization, reported in a previous article. Polypyrrole was effectively prepared regardless of the lignin type and the resulting composites were investigated using scanning electron microscope (SEM), cyclic voltammetry (CV), and impedance analysis. SEM and CV results showed that the obtained composites retained stable electrochemical properties after introduction of polypyrrole on the lignin surface. Impedance analyses showed that the surface properties of composites were dependent on lignin characteristics. In addition, the composites were embedded in agarose, an gelifying agent, to obtain conductive gels. It was found that the conductive gels possessed an electrical conductivity and also retained stable electrochemical properties, which indicated that the conductive gels might be useful for some applications.

• Korean Journal of Materials Research
• /
• v.34 no.9
• /
• pp.448-455
• /
• 2024

We conducted a study on excessive doping of the Cr and In elements in Bi-Sb-Te materials satisfying the Hume-Rothery rule, and investigated the resulting electrical and thermal properties. From X-ray diffraction (XRD) results, we confirmed the formation of a single phase even with excessive doping. Through analysis of electrical properties, we observed the highest enhancement in electrical characteristics at y = 0.2, suggesting that the appropriate ratio of Bi-Sb significantly influences this enhancement. Using the Callaway-von Baeyer (CvB) model to assess scattering due to point defects, we calculated the experimental point defect scattering factor (Γ_CvB.exp), which was notably high due to the substantial differences in volume and atomic weight between the substituted (Cr, In) and original (Bi, Sb) elements. Additionally, we conducted a single parabolic band (SPB) modeling analysis of materials with compositions y = 0.1 and 0.2, where, despite a decrease in density-of-states effective mass (m_d^*) during the enhancement process from y = 0.1 to 0.2, a sharp increase in non-degenerate mobility (μ₀) led to an 88 % increase in weighted mobility (μ_w). Furthermore, analyzing zT with respect to n_H revealed a 51 % increase in zT at a composition of y = 0.2. This study confirmed a significant reduction in lattice thermal conductivity with the co-doping strategy, and with further compositional studies to improve electrical properties, we anticipate achieving high zT.

• Korean Journal of Agricultural Science
• /
• v.12 no.2
• /
• pp.183-190
• /
• 1985

To determine anti-lodging effect of paclobutrazol and its influence on yield of rice, paclobutrazol was applied at 12 and 18g ai/10a to cv. Nakdongbyeo and cv. Seomjinbyeo 20, 15, and 10 days before heading under 12 and 20kg/10a nitrogen conditions. 1. Paclobutrazol reduced internode length of rice, especially internode N3. Higher suppression of stem of both cultivars and reduction of ear length in cv. Nakdongbyeo were observed when paclohutrazol was applied at 18g ai/10a 15 and 20 days before heading. 2. Paclobutrazol increased culm cross-section area, culm diameter, linear density and stem flexure resistance which affected anti-lodging efficacy. Although actual lodging was not occurred in field, less stem inclination was observed at paclobutrazol treated plots. 3. There were significant correlation between stem flexure resistance and culm cross-section area, culm diameter and linear density, and negative correlation between straw inclination angle and culm cross-section area and culm diameter. 4. Slight yield reduction was observed when paclobutrazol was applied at 18g ai/10a 20 days before heading. However, when paclobutrazol was applied at 12g ai/10a 10 and 15 days before heading, rice yield was not decreased compared to untreated control.

• Journal of Biosystems Engineering
• /
• v.37 no.3
• /
• pp.177-183
• /
• 2012

Purpose: In near infrared spectroscopy, interactance configuration of a light source and a spectrometer probe can provide more information regarding fruit internal attributes, compared to reflectance and transmittance configuration. However, there is no through study on the parameters of interactance measurement setup. The objective of this study was to investigate the effect of the parameters on the estimation of soluble solids content (SSC) and firmness of muskmelons. Methods: Melon samples were taken from greenhouses at three different harvesting seasons. The prediction models were developed at three distances of 2, 5, and 8 cm between the light source and the spectrometer probe, three measurement points of 2, 3, and 6 evenly distributed on each sample, and different number of fruit samples for calibration models. The performance of the models was compared. Results: In the test at the three distances, the best results were found at a 5 cm distance. The coefficient of determination ($R_{cv}{^2}$) values of the cross-validation were 0.717 (standard error of prediction, SEP=$1.16^{\circ}Brix$) and 0.504 (SEP=4.31 N) for the estimation of SSC and firmness, respectively. The minimum measurement point required to fully represent the spectral characteristics of each fruit sample was 3. The highest $R_{cv}{^2}$ values were 0.736 (SEP=$0.87^{\circ}Brix$) and 0.644 (SEP=4.16 N) for the estimation of SSC and firmness, respectively. The performance of the models began to be saturated when 60 fruit samples were used for developing calibration models. The highest $R_{cv}{^2}$ of 0.713 (SEP=$0.88^{\circ}Brix$) and 0.750 (SEP=3.30 N) for the estimation of SSC and firmness, respectively, were achieved. Conclusions: The performance of the prediction models was quite different according to the condition of interactance measurement setup. In designing a fruit grading machine with interactance configuration, the parameters for interactance measurement setup should be chosen carefully.

• Korean Journal of Environmental Agriculture
• /
• v.32 no.2
• /
• pp.102-107
• /
• 2013

BACKGROUND: Pithy pear fruit are not distinguished externally from sound fruit and thus often cause unexpected economic losses. To find out the cause of pithiness, the pithiness incidence and characteristics of Japanese pear (Pyrus pyrifolia cv. Niitaka) fruit picked from a spot frequently produced pithy fruit in an orchard were compared with those of fruit picked from another spot produced sound fruit every year. And the soil chemical properties of the two spots and mineral contents in fruit, shoots, and leaves of Japanese pear trees cultivated in the two spots were also examined. METHODS AND RESULTS: The pithiness incidence was 0, 8.8, and 11.3% at 7 days before and 0 and 7 days after optimal harvest date, respectively, in the spot frequently produced pithy fruit. Flesh firmness was significantly lower in pithy fruit than in sound fruit, while soluble solids content was slightly higher in pithy fruit than in sound fruit. Unlike other mineral contents, Ca content was significantly lower in pithy fruit than in sound fruit. These results indicate that Ca deficiency in fruit is closely associated with decrease in flesh firmness and thus pithiness development. Ca content in soil of the spot frequently produced pithy fruit was also significantly lower than that in soil of the spot produced sound fruit. However, shoots or leaves did not exhibit significant difference in Ca and/or other mineral contents between the two spots, indicating that Ca deficiency in fruit is dependent on the translocation of Ca within a plant rather than soil Ca status. Although total-N, available $P_2O_5$, K, and Ca contents were significantly lower in soil of the spot frequently produced pithy fruit than in soil of the spot produced sound fruit, Mg and Na contents and pH were not different between the soil conditions. CONCLUSION(S): Fruit maturity and Ca level in fruit are closely related to the incidence of pithiness in 'Niitaka' Japanese pear.

• Korean Journal of Plant Tissue Culture
• /
• v.27 no.2
• /
• pp.109-115
• /
• 2000

Effects of the heavy-ion ($^{14}$ N or $^{20}$ Ne) beam irradiation on the response of anthers, growth of calli, germination of seeds, and the early growth after the germination of tobacco (Nicotiana tabacum L. cv. BY-4) were investigated. Anthers precultured for 10 days before the irradiation became brown without callus or shoot induction over 20 Gy of $^{14}$ N and $^{20}$ Ne ion beam irradiation. Relative growth rate of the cultured calli was reduced by the irradiation and became brown significantly 2 weeks after the $^{14}$ N and $^{20}$ Ne ion beam irradiation over 50 Gy. The increased intensity of the heavy-ion ($^{14}$ N, $^{20}$ Ne) beam irradiation resulted in the delay of seed germination and the inhibition of the early growth both in water-treated and non-treated seeds before the irradiation. In addition, the heavy-ion beam irradiation to the imbibed seeds inhibited seed germination more than that to the non-imbibed seeds. The screening approach of non-imbibed seeds with heavy-ion beam irradiation using in vitro culture system was more useful than the filter-paper germination method in investigating the characteristics of heavy-ion beam-irradiated seed population and the screening of morphological variants at the early stage of the plant growth.

• Journal of the Korean Electrochemical Society
• /
• v.12 no.2
• /
• pp.142-147
• /
• 2009

The influence of graphitization of carbon support on the electrochemical corrosion of carbon and sintering of Pt particles are investigated by measuring $CO_2$ emission at a constant potential of 1.4 V for 30 min using on-line mass spectrometry and cyclic voltammogram. In comparison to commercial Pt/C (from Johnson Matthey), highly graphitized carbon nanofiber (CNF) supported Pt catalyst exhibits lower performance degradation and $CO_2$ emission. As the more carbon corrosion occurred, the more prominent changes were detected in electrochemical characteristics of fuel cell. This indicates that the carbon corrosion affects significantly the fuel cell durability. From the observed results, CNF is considered to be more corrosion resistant material as a catalyst support. However, CNF shows higher aggregation of Pt particles under repeated cyclic voltammetry between 0 and 0.8 V where the carbon corrosion is not initiated.